Home Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are following because all the thoughts and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to be able to find any project of their choice within this bundle quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Home Furniture Plans

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and build beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Home Furniture Plans.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll be able to build some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking plans? How long did it take to finish the project? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you speak about your job, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Home Furniture Plans

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Home Furniture Plans.

Begin with a concept in your mind of what you want to build and then get a excellent woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as expansive a woodworking program as you pick. However, the odds are if you begin using a little woodworking project initially, you’ll get a better chance of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the quantity and type of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to finish your immediate or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry area to work and may need a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Home Furniture Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the writers in woodworking publications do a story on the best way to improve your woodworking craft. When it is showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Home Furniture Plans

If you are just beginning and very interested in doing a DIY project for house then, woodworking could be fun. If you do not have the proper information, education, and skill, you might land up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t start a job if you are not interested, as this may land you in a terrible location.

2. Think of the primary reason for creating this woodworking project. Choose the uses of the thing you are making.

3. Consider your abilities and examine the time you have, until you begin with a project.

4. Start projects that you’re able to complete. If you’re in the midst of a work, then it’s better not to begin any project at all.

How to Become a Master Woodworker From Your Own Home Home Furniture Plans

If you keep those vital things in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to begin with. As a beginner, always pick a project which has quite a basic build up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Home Furniture Plans

Tools would be the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are needs. However, for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available in the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Dependent on the sort of job that you want to finish, pricing can be determined. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is better to resolve a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not need to buy any more material other than the timber ply.

Time and Instructions

Instructions are among the principal things that each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the process, what to do and how to do it. Time also has an important role in the construction of woodworking jobs. Woodworking projects require time and therefore it is crucial for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword which can help you to achieve success is proper planning. With appropriate planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, the item you want to build, the tools you need to own and the typical time it’s possible to give every day; then you are ready to go.

Conclusion, Home Furniture Plans

These tips and education is likely to make the woodworking projects and strategies for beginners quickly to complete. Always ensure you have all of the essential tools, materials, area ready. Read the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Home Furniture Plans

People if you’re looking for a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you need to be very cautious when choosing which job to begin with since there are projects that may be too difficult for a newbie. But don’t be concerned about that because we are going to provide you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you choose your job you have to be aware of if you’ve got the available resources to work on such a project. Try not to invest a good deal of cash on buying equipment when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Home Furniture Plans

Woodworking in your home will provide you time to explore unique jobs and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different projects.
It’s very important you know more about different types of wood available for creating projects. Anticipate carpenters utilize different types of wood quality for decorating bits, learning which type of wood that they use can allow you to prepare the wood you will need for certain projects you might choose to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to satisfy your wants.

Home Furniture Plans practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs utilizing various tools so you may get the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Home Furniture Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop can produce a wide variety of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you’ll perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to set up your first shop. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Home Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Home Furniture Plans if you can have a dedicated place for a workshop all the greater. Floor tools and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, set up a seat area where you can store and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the bench to hang other equipment. Put in a woodworking vice at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Home Furniture Plans

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools at the regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. There are an abundance of quality gently used programs out there which belong to individuals who stumbled on that one molding job around the home or obtained tools as presents that they will never use. You can usually buy tools for these sellers for under half the original cost and save even more money should you make a package deal for all their unused equipment. Of course, getting tools from private people will take extra time and perhaps travel expenses. Weigh the benefits of traveling around town to save a couple extra bucks on a inexpensive piece of gear. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. With this set up I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this can end up being the most flexible instrument in a startup workshop. In fact, in the hands of an expert, a power hand saw can be employed to build an whole property. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second job. After selecting the proper saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid . These have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It is perfect for cutting holes in wood too like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander with a bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and fix any imperfections in wood pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a set of the maximum clamps which you can afford. You can contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs without tedious handle rotation. The timber clamping surfaces in your vice will periodically require replacement. I would rather use soft pine in my vices which will not crush or damage lots of the different woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your shop you may not be using the tape at these lengths, the bigger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Assessing when you’re on your own will be a lot simpler, and of course, quality tape measures can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are made equal. Avoid cheap house brands sold as carpenter’s glue. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I have also discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Home Furniture Plans

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Nebraska Furniture Mart

Nebraska Furniture Mart is the largest home furnishing store in North America selling furniture, flooring, appliances and electronics. NFM was founded in 1937 by Belarus-born Rose Blumkin, universally known as Mrs. B., in Omaha, Nebraska, United States. Under the motto "sell cheap and tell the truth,"[1] she worked in the business until age 103. In 1983, Mrs. B. sold a majority interest to Berkshire Hathaway in a handshake deal with Warren Buffett.[1][2]

Nebraska Furniture Mart was founded in 1937 by Rose Blumkin (born December 3, 1893-1998), universally known as "Mrs. B.", in Omaha, Nebraska. Blumkin, borrowed the initial $500 investment from her brother,[1] while her husband Isadore continued to run their second hand clothing store.[2] At one point early on, the Blumkins had to sell their own home furnishings to pay off a debt. Mrs. B set the Mart apart by selling products cheaper than the other furniture store around. The bigger competitors were able to successfully get the furniture suppliers to stop selling to the Mart because of the prices. Rather than give up and raise prices, Mrs. B went to other suppliers around the country while still underselling her competitors.[2]

In 1983, at age 89, Mrs. B sold 80%[3] of Nebraska Furniture Mart to Warren Buffett in a one-page handshake deal.[2][1] Buffett bought the company without auditing her inventory or books, instead basing the deal on his own shopping experience at the Mart and his respect for the Blumkin family.[4] Mrs. B sold the business due to her belief that if she sold before her death, her children wouldn't fight over the company. She continued to work at the store, putting in her normal 70 hour work week, using an electric scooter to get around.[2] Soon after the sale, Buffett would say, “Put her up against the top graduates of the top business schools or chief executives of the Fortune 500 and, assuming an even start with the same resources, she’d run rings around them.”[4]

Video: Woodworking Projects