Home Woodworking Tools | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re following because all the ideas and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any project of their choice in this package quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available across the internet. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. Therefore, it’s certainly worth buying!

Starting Your First Woodworking Shop Home Woodworking Tools

Woodworking is 1 hobby that can also be a rewarding career if you like to work with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to construct all types of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Home Woodworking Tools.

It requires time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to create some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to complete the job? What type of tools did you use? How on earth did you make such a beautiful piece of furniture? As you speak about your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Home Woodworking Tools

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Home Woodworking Tools.

Begin with a concept in mind of what you want to build and then get a really good woodworking project plan that’s geared toward beginners. There are several little woodworking projects for beginners available for purchase from online woodworking merchants. A couple of woodworking plan suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a few. Obviously, you can begin with as expansive a woodworking plan as you choose. However, the chances are if you start out with a small woodworking job initially, you’ll have a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood required, and the essential hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry place to work and might need a pair of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Home Woodworking Tools Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking publications do a story on the best way best to increase your woodworking craft. When it is showing you the way to apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Home Woodworking Tools

If you are just beginning and very interested in doing a DIY job for house afterward, woodworking could be fun. If you don’t have the proper information, education, and skill, you might land up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a particular sense. Don’t begin a job if you are not interested, because this might land you in a bad place.

2. Think of the main reason behind making this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a job.

4. Start projects which you can finish. If you are in the midst of some work, then it is better to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Home Woodworking Tools

If you keep those essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to start with. As a beginner, always pick a project which has quite a basic build up or a simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Home Woodworking Tools

Tools are the means through which you will win the struggle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You can even buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking jobs. Based on the type of project that you want to complete, pricing could be set. The simple the job, the less cost it involves. But at the very beginning buying the tools will probably be somewhat hefty. Because of this, it’s better to fix a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things that every newcomer should follow. Instructions manual is quite simple to comprehend the process, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also plays a significant role in the construction of woodworking projects. Woodworking projects require time and so it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to reach success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, the item you want to construct, the tools you require to own and the typical time you can devote daily; then you are all set to go.

Conclusion, Home Woodworking Tools

All these tips and instruction is likely to make the woodworking projects and plans for beginners fast to complete. Always make sure you have all the vital tools, materials, space prepared. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to earn a fantastic woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Home Woodworking Tools

People if you’re trying to find a way to pass time or want an alternate method to make money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very careful when choosing which job to start out with since you will find jobs which can be too difficult for a newbie. But don’t worry about that because we will provide you guidelines on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your job you have to know if you’ve got the available resources to work on such a job. Try not to invest a good deal of cash on buying equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Home Woodworking Tools

Woodworking at home will give you time to research different jobs and find out a lot of things. That is why it’s important to invest less money when starting out so that you can manage to make errors and at any time learning about different projects.
It’s very important you know about different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you will need for specific jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to fulfill your needs.

Home Woodworking Tools practice makes perfect so be sure you practice your work every day if at all possible. Try out a lot of layouts using a variety of tools so that you can find the hang of working with the tools. When starting out you can earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Home Woodworking Tools

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal amount of tools and equipment. A little home workshop can produce a broad array of simple projects which can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll do your woodworking, Depending on the dimensions of your house, you might be able to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the rest of the family. A good compromise might be the garage of your property.

This might help decrease the problems of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Home Woodworking Tools

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Home Woodworking Tools if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can stay in position from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Home Woodworking Tools

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality gently used tools out there that belong to individuals who stumbled on that 1 molding job around the house or received tools as gifts which they will never utilize. You can usually buy tools for all these sellers for under half the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private people will take extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a couple added bucks on a cheap piece of gear. The excess expense of time and travel in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most flexible tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be used to build an whole property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second job. After selecting the proper saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot only cut corners. It’s perfect for cutting holes in wood too like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch version. Down the street, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll find your palm sander with a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you can afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the consumer to rapidly open and close the limbs with no dull handle rotation. The timber beamed surfaces in your vice will periodically require replacement. I would rather use soft pine in my vices that will not crush or damage lots of the different woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you may not be using the tape in these lengths, the larger tape steps offer more rigid tapes that will not flop around and slide off the ending of planks. Assessing when you are by yourself will be a lot easier, and of course, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will help you in marking the ideal angles as well as chemical angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes on the way.

Adhesives: Not many glues are created equal. Avoid cheap home brands sold as carpenter’s glue. The expense of glue through all of your jobs is a minor cost consideration. For that reason, it makes sense to decide on the very best. I have also found over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Home Woodworking Tools

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

List of tool manufacturers

Video: Woodworking Tools