Homemade Wood Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they are following because most of the thoughts and jobs Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many may still appear unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually many things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that beginners will need. You can always increase your toolbox as you get experience!

Homemade Wood Furniture Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the authors in woodworking publications do a story about how to improve your woodworking craft. When it’s showing you how to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Homemade Wood Furniture Plans

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the proper information, instruction, and skill, you might wind up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a project if you’re not interested, because this might land you in a terrible location.

2. Think of the main reason for creating this woodworking project. Choose the uses of the thing you are making.

3. Consider your abilities and analyze the time that you have, before you start with a job.

4. Start jobs which you can finish. If you’re in the midst of a work, then it’s better not to start any project in any way.

Starting Your First Woodworking Shop Homemade Wood Furniture Plans

If you keep those essential points in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a newcomer, always pick a project which has a very basic construct up or a very simple construction. A few easy to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you can always proceed into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Homemade Wood Furniture Plans

Tools are the ways whereby you can win the battle of woodworking. Many people believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available on the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking jobs. Based on the type of job that you would like to finish, pricing can be determined. The simple the project, the less cost it involves. However, at the beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t need to buy any more material other than the wood ply.

Time and Directions

Instructions are among the primary things which each and every newcomer should follow. Instructions manual is very simple to comprehend the procedure, what to do and the way to get it done. Time also has a significant part in the construction of woodworking projects. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword that will help you to achieve success is proper preparation. With appropriate planning and a plan, it is likely to achieve success quickly. If you know the purpose of woodworking, then the thing you need to build, the tools you need in order to own and the typical time you can give daily; then you’re all set to go.

Conclusion, Homemade Wood Furniture Plans

All these strategies and instruction is likely to create the woodworking projects and plans for novices quickly to finish. Always ensure that you have all the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning can help you to earn a fantastic woodworking job for your property.

|

The Benefits of Woodworking Homemade Wood Furniture Plans

Folks when trying to find a way to pass time or desire an alternative method to generate money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very careful when choosing which project to begin with since there are projects that may be too difficult for a newbie. But don’t be concerned about that because we are going to give you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your job you have to be aware of if you’ve got the available tools to work on that project. Try not to spend a good deal of cash on purchasing gear when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Homemade Wood Furniture Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will provide you time to explore different jobs and learn so many things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at some time learning about various jobs.
It’s extremely important you know more about the different types of wood available for making projects. Expect carpenters utilize different types of wood quality for decorating bits, learning which kind of wood that they use can help you prepare the wood you’ll need for specific projects you might want to pursue.
Once you know the basics of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to fulfill your needs.

Homemade Wood Furniture Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs utilizing a variety of tools so that you may find the hang of using the tools. When starting out you may make a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Homemade Wood Furniture Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a broad variety of simple projects that will help you develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll perform your woodworking, based on the dimensions of your house, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the top levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you reside, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Homemade Wood Furniture Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Homemade Wood Furniture Plans if you’re able to have a dedicated place for a workshop all the better. Floor tools and bench top equipment can remain in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf below the bench to home your hand power tools along with a pegboard over the bench to hang additional gear. Put in a woodworking at one end of the bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Homemade Wood Furniture Plans

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools in the regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find plenty of quality lightly used tools out there which belong to people who stumbled on that one molding project around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for these sellers for less than half the initial price and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will require extra time and perhaps travel expenses. Weigh out the advantages of traveling around town to save a couple extra bucks on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the favorite name, this can prove to be the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw can be employed to build an entire property. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next job. After choosing the right saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut corners. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want on your workshop. Buy an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander using a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and correct any imperfections in wood bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you can spend. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without dull handle rotation. The wood clamping surfaces in your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which won’t crush or damage lots of the different woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you may not use the tape in these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the ending of boards. Measuring when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of glue through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Homemade Wood Furniture Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Diggnation episodes

Video: Woodworking Tools