Homemade Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are after because most of the thoughts and jobs Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are actually many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People that are only getting started will discover the thoughts and jobs in Ted’s package quite simple. No doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step-by-step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this package quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large size. Nonetheless, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he can, through simple to understand textual instructions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Homemade Woodworking Projects

Woodworking is 1 hobby that could also be a rewarding career if you like to work together with your hands and build beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Homemade Woodworking Projects.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you’ll be able to build some really wonderful furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It’ll be a subject of conversation when you have friends come over to visit. They’ll ask: How did you make it? Just how long did it take to complete the project? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your job, a sense of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Homemade Woodworking Projects

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Homemade Woodworking Projects.

Start with an idea in mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for novices available for purchase from online woodworking retailers. Obviously, you can begin with as grand a woodworking plan as you pick. On the other hand, the odds are if you begin with a little woodworking project initially, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the quantity and type of wood needed, and the required hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you want to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood adhesive! Obviously, you’ll require a dry place to work and may need a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools that novices will need. You may always increase your toolbox as you gain experience!

Homemade Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the authors in woodworking magazines do a story on how to increase your woodworking craft. When it is showing you the way you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Homemade Woodworking Projects

If you’re a beginner and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having said, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Do not start a job if you’re not interested, as this may land you in a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of the thing you are making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start projects that you’re able to complete. If you are in the middle of some work, then it is better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Homemade Woodworking Projects

If you keep these essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you wish to begin with. As a newcomer, always select a project which has a very basic construct up or a simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with forests and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Homemade Woodworking Projects

Tools are the ways whereby you can win the struggle of woodworking. Many people believe power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws available in the market. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You can even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much easy.

8. Additional small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed cost on woodworking jobs. Based on the type of job that you would like to finish, pricing could be set. The simple the job, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Therefore, it is better to fix a budget on the tools, then keyword on the project. Buying the basic tools will ensure that you don’t need to purchase any more material other than the timber ply.

Time and Directions

Instructions are among the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is very easy to comprehend the process, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also has an important role in the building of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which will help you to achieve success is proper preparation. With proper planning and a strategy, it’s likely to achieve success quickly. If you understand the objective of woodworking, the thing that you need to build, the tools you need to own and the average time you can give daily; then you’re ready to go.

Conclusion, Homemade Woodworking Projects

These strategies and instruction will make the woodworking projects and plans for novices fast to finish. Always make sure that you have all of the essential tools, materials, space prepared. Read the instructions for building an item handy. Appropriate strategy and preparation can allow you to make a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Homemade Woodworking Projects

People when trying to find a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which job to begin with since there are jobs which may be too difficult for a beginner. But do not be concerned about that because we are going to give you guidelines on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you pick your project you have to be aware of if you’ve got the available tools to work on such a job. Try not to invest a lot of money on buying gear when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no difference between the hand and the normal hands.

The Benefits of Woodworking Homemade Woodworking Projects

Woodworking at home will give you time to research different jobs and find out a lot of things. That is why it’s important to invest less money when starting out so you can manage to make errors and at some time learning about various jobs.
It is very important that you know about the different types of wood available for making jobs. Expect carpenters use different types of wood quality for decorating bits, learning what type of wood they use will allow you to prepare the wood you will need for specific projects you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Homemade Woodworking Projects practice makes perfect so make sure you practice your work daily if at all possible. Try out a lot of layouts using a variety of tools so that you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Homemade Woodworking Projects

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop may produce a broad array of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us discuss where you’ll do your woodworking, based on the size of your house, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the top levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the family. A good compromise could be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you live, a keyword garage layout might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Homemade Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they add more space to work in. Homemade Woodworking Projects if you can have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and gear. In the beginning, set up a bench area where you can store and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the bench to hang other gear. Put in a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Homemade Woodworking Projects

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used programs out there that belong to individuals who stumbled on that 1 molding project around the home or received tools as gifts which they will never utilize. You can usually buy tools for all these sellers for under half of the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple added bucks on a inexpensive piece of equipment. The excess cost of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and complex pieces. Focus on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. With this set up I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can end up being the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an entire property. At some point, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next job. After choosing the right saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It is perfect for cutting holes in wood also like manage slots. At some point, you’ll want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander with a little bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually requires the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the longest clamps that you could afford. You can contact them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the user to quickly open and close the jaws without dull handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a good quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your store you might not be using the tape in these spans, the larger tape measures offer more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you’re on your own will be a lot easier, and of course, quality tape steps can endure for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Homemade Woodworking Projects

Woodworking is referred to as the construction or the production of objects out of wood. It is possible to create a great deal of different objects from woodworking and these items can be as large as gazebos or as small as wooden toys. However large or small your personal project maybe you’ll be very likely to do that aim with woodworking. In addition, woodworking has many personal in addition to emotional benefits! In this guide, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

Individuals who build things from wood are generally known keyword as carpenters. Carpenters can operate on a variety of woodworking projects and occupation types. For instance, a few carpenters own their carpentry business and these folks have the luxury to place their job hours. This advantage allows carpenters the chance to spend more time with their own families and have less job stress. Raising children is a really difficult task no matter what way you approach the endeavor! For a carpenter who owns his or her own business, this task might not be hard since that person is going to have more time to become part of his or her child’s life. By playing a bigger part in the life of your child you will be having a larger impact on the sort of personality that kid develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry may also have health benefits as well.

Finding Woodworking Projects and Plans for Beginners Homemade Woodworking Projects

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Keeping your body physically healthy is vital and keyword can help prevent the incidence of various illnesses in the foreseeable future life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and reduce the odds of having a number of different disorders.

Homemade Woodworking Projects, Do It Yourself Woodworking Saves Cash:

I always feel like I paid way too far when I go to home improvement stores and purchase patio furniture, and I am sure that I am not the only person that has felt this way! A successful small business owner once advised me to constantly raise the sales price of a product to double everything you obtained it for. In this manner, you always have the option to decrease the merchandise to 50 percent away and come out without getting any losses. This sounds like it may be exactly the exact same tactic that home improvement stores use in selling their own wooden furniture solutions. Regardless, there’s a way which you can get around paying the extra money and that has to do with building it yourself. Luckily, there are several really good woodworking products offering thousands of comprehensive woodworking keyword plans for countless different job types. Thus, you really can build anything you need or see in any home improvement store. Doing something does take a little bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood glue

Animal glue, especially hide glue, was the primary adhesive of choice for many types of woodworking, including furniture and lutherie, for many centuries. It is manufactured from rendered collagen from the skins (hides) of animals. It is chemically similar to edible gelatin and is non-toxic if ingested. Hide glue is still used today in specialized applications: musical instruments (lutherie), for replica furniture, and for conservation-grade repairs to antique woodwork. Hide glue is measured on the basis of its gel strength, a measure of how many grams of force it requires to depress a 1⁄2 in (13 mm) plunger 4 mm (0.16 in) into a 12.5% protein solution of the glue at 10 °C (50 °F). Glue is manufactured in standard grades from 32–512 grams (1.1–18.1 oz). 192-gram (6.8 oz) strength is the most commonly used for woodworking; 251-gram (8.9 oz) is the highest normally used for instrument building; 135-gram (4.8 oz) is the lowest used for general woodwork. Glue above 250-gram (8.8 oz) strength requires excessive dilution and so leaves too little glue in joints for effective adhesion, so it is not commonly used. Liquid versions of hide glue are now available; typically they have urea added to keep the glue liquid at room temperature and to extend drying time. Examples of liquid hide glue are Old Brown Glue or Titebond Liquid Hide. Hide glue does not creep. Hide glue joints are easy to repair, by just heating and adding more hide glue.[1][2][3]

Urea-formaldehyde resin adhesives feature a low effective cost, low cure temperatures, resistance to microorganisms and abrasion, and light color. It does not creep, and can be repaired with epoxy. It can rapidly deteriorate in hot, moist environments, releasing formaldehyde (a carcinogen).[4][5][6][7]

Resorcinol-formaldehyde resin glue is very strong and durable (resisting immersion in boiling water, mild acids, salt water, solvents, mold, fungus, ultraviolet, etc.). It must be mixed before use (liquid resin and powdered catalyst). It has a dark purple color, which may be objectionable in some uses. Toxic.[8] For many years, the Federal Aviation Administration (FAA) has stated that "Resorcinol is the only known adhesive recommended and approved for use in wooden aircraft structure and fully meets necessary strength and durability requirements"[4] for certificated aircraft. However, in fact the vast majority of wooden aircraft built in recent decades (mostly amateur-built aircraft) instead use other types of adhesives (primarily epoxy resin systems), which offer greater strength and, even more importantly, much less criticality in perfect application technique. Most newer adhesives are much more tolerant to typical construction mistakes (such as small gaps or misalignments between parts) than resorcinol, which offers virtually no tolerance for such everyday construction situations. This can pose major difficulties, especially in complex assemblies. Resorcinol is, however, still used by some builders/restorers, and is commonly seen in vintage aircraft.

Video: Woodworking Projects