How To Build A Ramp For A Shed | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re after because all the ideas and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right option. There are actually many things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those who are just getting started will find the thoughts and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will be able to locate any job of their choice within this bundle quite easily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found across the net. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners How To Build A Ramp For A Shed

Woodworking is one hobby that could also be a rewarding profession if you like to work with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. How To Build A Ramp For A Shed.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to create some really wonderful furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How did you create it? Just how long can it take to complete the project? What kind of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you discuss your job, a feeling of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home How To Build A Ramp For A Shed

If you are thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? How To Build A Ramp For A Shed.

Begin with an idea in mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking retailers. A few woodworking program suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a few. Obviously, you can start out with as grand a woodworking plan as you pick. However, the odds are if you start out using a small woodworking job at first, you will get a better prospect of keyword completing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the quantity and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you may not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood glue! Obviously, you will require a dry place to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always increase your toolbox as you get experience!

How To Build A Ramp For A Shed Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story about how to increase your woodworking craft. Whether it is showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop How To Build A Ramp For A Shed

If you’re a beginner and very enthusiastic about doing a DIY project for house then, woodworking could be fun. If you do not have the proper information, instruction, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a project if you are not interested, because this might land you at a terrible place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time that you have, until you start with a project.

4. Start jobs that you’re able to finish. If you are in the middle of a work, then it is wise to not start any project at all.

Finding Woodworking Projects and Plans for Beginners How To Build A Ramp For A Shed

If you maintain those vital things in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you want to start with. As a beginner, always pick a project which has quite a basic build up or a simple construction. A few easy to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, How To Build A Ramp For A Shed

Tools are the means whereby you can win the struggle of woodworking. Many people believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You can also buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking jobs. Based on the type of project that you would like to finish, pricing could be determined. The easy the project, the less price it involves. But at the very beginning purchasing the tools will be a little hefty. Therefore, it is better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things that each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and how to get it done. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and so it is necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which will allow you to reach success is proper preparation. With proper planning and a strategy, it’s likely to achieve success quickly. If you understand the objective of woodworking, then the thing you want to construct, the resources you need in order to own and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, How To Build A Ramp For A Shed

These tips and instruction is likely to make the woodworking projects and strategies for novices fast to finish. Always ensure you have all of the vital tools, materials, area prepared. Keep the instructions for constructing an item handy. Proper strategy and planning can help you to make a fantastic woodworking job for your property.

|

The Benefits of Woodworking How To Build A Ramp For A Shed

People when looking for a way to pass time or desire an alternate method to make money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very careful when choosing which job to start out with because there are projects which can be too difficult for a beginner. But don’t worry about that because we are going to give you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you need to know if you’ve got the available resources to work on that project. Try not to spend a lot of money on purchasing gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand and the normal hands.

Starting Your First Woodworking Shop How To Build A Ramp For A Shed

Woodworking at home will provide you time to explore unique jobs and learn so many things. That is why it’s important to invest less money when starting out so you can afford to make mistakes and at some time learning about various projects.
It is very important that you know about different kinds of wood available for creating jobs. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what kind of wood that they use can allow you to prepare the wood you will need for certain projects you might choose to pursue.
Once you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to fulfill your needs.

How To Build A Ramp For A Shed practice makes perfect so be sure you practice your work every day if possible. Try out lots of designs using a variety of tools so that you may find the hang of using the tools. When starting out you may make a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

The Benefits of Woodworking How To Build A Ramp For A Shed

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A little home workshop can produce a wide array of simple projects that will help you develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you’ll do your woodworking, based on the dimensions of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the family. A good compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop How To Build A Ramp For A Shed

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. How To Build A Ramp For A Shed if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can stay in place from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and gear. At the beginning, establish a seat area where you are able to shop and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Add a sturdy shelf beneath the bench to house your hand power tools and a pegboard above the seat to hang other gear. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, How To Build A Ramp For A Shed

The scope of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, purchase your quality tools at your regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. You will find an abundance of quality gently used tools out there that belong to people who embarked on that 1 molding project around the home or obtained tools as presents which they will never use. You can usually buy tools for these sellers for less than half of the original cost and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private people will take extra time and possibly travel expenses. Weigh out the benefits of traveling around town to save a couple extra bucks on a cheap piece of gear. The extra cost of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire faster when exposed to high noise levels. Select powerful hearing protection which you find comfortable and effective. These may include earplugs or full ear keyword muff protectors. I find that a quality set of ear muff protectors is ideal for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. With this set up I’m protecting my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the popular brand name, this may prove to be the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be employed to build an entire house. Eventually, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next job. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut corners. It is perfect for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not need on your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might find that your palm sander using a little bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can afford. You can get in touch with them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed in the end of your seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the different forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you might not be using the tape at these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slide off the ending of planks. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to compound angles. Get the number three and two Robertson set. I discover that the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects once I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, How To Build A Ramp For A Shed

The peaceful satisfaction of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Shed

A shed is typically a simple, single-story roofed structure in a back garden or on an allotment that is used for storage, hobbies, or as a workshop. Sheds vary considerably in their size and complexity of construction, from simple open-sided ones designed to cover bicycles or garden items to large wood-framed structures with shingled roofs, windows, and electrical outlets. Sheds used on farms or in industry can be large structures. The main types of shed construction are metal sheathing over a metal frame, plastic sheathing and frame, all-wood construction (the roof may be asphalt shingled or sheathed in tin), and vinyl-sided sheds built over a wooden frame. Small sheds may include a wooden or plastic floor, while more permanent ones may be built on a concrete pad or foundation. Sheds may be lockable to deter theft or entry by children, domestic animals, wildlife, etc.

A culture of shed enthusiasts exists in several countries for people who enjoy building sheds and spending time in them for relaxation. In Australia and New Zealand there are magazines called The Shed, an association for shed hobbyists (the Australian Men's Shed Association), and a book entitled Men and Sheds.

Depending on the region and type of use, a shed may also be called a shack, outhouse, or "outbuilding". Sheds may be classified as "accessory buildings" in municipal bylaws which may regulate their size, appearance, and distance from the principal building and boundary lines.

Video: Woodworking Tools