How To Make Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are following because most of the thoughts and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are actually many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are only getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any project of their choice in this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to understand textual instructions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools which beginners will need. You can always add to your arsenal as you get experience!

How To Make Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. Whether it’s showing you the way to apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop How To Make Woodworking Plans

If you are just beginning and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the proper information, education, and skill, you may wind up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential aspects you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Creating something new with your hands is a particular sense. Do not begin a project if you’re not interested, because this might land you in a terrible location.

2. Think of the main reason for making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and examine the time that you have, until you begin with a project.

4. Start projects which you can finish. If you are in the middle of a work, then it is better to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners How To Make Woodworking Plans

If you keep those vital points in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you wish to begin with. As a newcomer, always pick a job that has quite a basic construct up or a simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, How To Make Woodworking Plans

Tools would be the ways through which you will win the struggle of woodworking. Many people believe power tools are needs. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there on the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Additional small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking jobs. Dependent on the type of job you would like to finish, pricing can be determined. The easy the project, the less price it involves. However, at the very beginning buying the tools will be somewhat hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material other than the wood ply.

Time and Directions

Directions are one of the primary things that every beginner should follow. It is like the woodworking Bible. Instructions guide is quite simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic guide for completing the job. Time also has an important role in the construction of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success immediately. If you understand the purpose of woodworking, the thing you want to build, the resources you need in order to possess and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, How To Make Woodworking Plans

All these strategies and instruction is likely to make the woodworking projects and plans for beginners quickly to complete. Always make sure that you have all the essential tools, materials, space prepared. Keep the instructions for constructing an item handy. Appropriate strategy and planning can help you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners How To Make Woodworking Plans

Folks when trying to find a way to pass time or desire an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which project to begin with since you will find projects that can be too tough for a newbie. But do not worry about that because we are going to provide you guidelines on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, so before you choose your job you have to know if you’ve got the available tools to work on that project. Try not to invest a good deal of cash on buying gear when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners How To Make Woodworking Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to research different jobs and learn so many things. That’s why it’s very important to spend less money when starting out so you can afford to make errors and at any time learning about various projects.
It’s extremely important that you know about different kinds of wood available for making projects. Anticipate carpenters use different kinds of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood choice and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to fulfill your wants.

How To Make Woodworking Plans practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so that you may get the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly use them and produce quality projects.

|

The Benefits of Woodworking How To Make Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal amount of gear and equipment. A small home workshop may produce a broad variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you’ll do your woodworking, Depending on the size of your house, you might be able to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding may be ideal to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the home. Another advantage of detached workshops is, of course, the noise level. It’s possible to work without bothering the rest of the household. A good compromise could be the garage of your property.

This can help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking How To Make Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. How To Make Woodworking Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a bench area where you are able to store and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the seat to hang additional gear. Install a woodworking at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, How To Make Woodworking Plans

The scope of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at your regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. There are an abundance of quality lightly used programs out there which belong to individuals who stumbled on that one molding project around the home or received tools as presents which they won’t ever use. You can usually buy tools for all these sellers for under half the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take additional time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a few extra bucks on a inexpensive piece of gear. The excess expense of time and travel in these situations is generally justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand gear yet produced sophisticated and intricate bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this may prove to be the most versatile instrument in a startup workshop. In fact, in the hands of an expert, a power hand saw could be employed to build an whole house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your second job. After choosing the proper saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid . These have a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut curves. It’s perfect for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander with a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Start with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a few years to collect a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you could spend. You can get in touch with them for smaller glue jobs and enlarge them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of the seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer you quick release mechanisms that enabled the consumer to rapidly open and close the jaws without tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft walnut in my vices that will not crush or damage many of the different woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not be using the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you’re on your own will be a lot easier, and naturally, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The cost of glue through all of your projects is a little cost consideration. Therefore, it makes sense to go with the best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, How To Make Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Make (magazine)

Make: (or MAKE:) is an American bimonthly magazine published by Maker Media[1] which focuses on do it yourself (DIY) and/or DIWO (Do It With Others)[2] projects involving computers, electronics, robotics, metalworking, woodworking and other disciplines. The magazine is marketed to people who enjoy making things and features complex projects which can often be completed with cheap materials, including household items. Make magazine is considered "a central organ of the maker movement".[3]

Its first issue was released in January 2005; as of July 2016, 52 issues were published. It is also available as an iPad version and a Texterity digital edition on the Web, which is free of charge to existing magazine subscribers. The HTML-based digital edition allows for searching and includes additional content such as videos, with freely accessible blogs, podcasts and forums also available in the website. The digital edition also allows limited sharing of articles with friends.

The magazine has features and rotating columns, but the emphasis is on step-by-step projects. Each issue also features a Toolbox section with reviews of books and tools. Most volumes have a theme to which the articles in the special section are usually related. Notable previous columnists include Cory Doctorow, Lee D. Zlotoff, Mr. Jalopy, and Bruce Sterling. The cartoonist Roy Doty has also contributed to many issues of the magazine.

Video: Woodworking Tools