Indoor Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because most of the ideas and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those that are just getting started will find the ideas and projects in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice within this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he could, through easy to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools which novices will need. You may always increase your arsenal as you get experience!

Indoor Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. Whether it is showing you how to apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Indoor Furniture Plans

If you are a beginner and very interested in doing a DIY project for home then, woodworking can be interesting. If you do not have the proper information, education, and skill, you may wind up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you are not interested, as this may land you at a bad place.

2. Think of the main reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, until you begin with a job.

4. Start jobs which you’re able to finish. If you’re in the midst of some work, then it is wise not to start any project in any way.

The Benefits of Woodworking Indoor Furniture Plans

If you maintain those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you want to begin with. As a beginner, always select a project that has quite a basic build up or a simple construction. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Indoor Furniture Plans

Tools are the means whereby you will win the battle of woodworking. A lot of people believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking jobs. Based on the sort of project that you would like to finish, pricing could be set. The easy the project, the less price it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it is much better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the process, what to do and how to get it done. It keyword is a systematic manual for finishing the job. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword that will allow you to achieve success is proper planning. With appropriate planning and a plan, it’s possible to achieve success immediately. If you know the objective of woodworking, the thing that you want to construct, the resources you need in order to possess and the average time you can devote daily; then you are all set to go.

Conclusion, Indoor Furniture Plans

All these strategies and education will create the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and preparation can help you to make a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Indoor Furniture Plans

People when trying to find a way to pass time or desire an alternative way to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which job to start out with because there are jobs which can be too tough for a beginner. But do not be concerned about that because we are going to provide you tips on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your job you need to be aware of if you have the available tools to work on such a job. Try not to spend a good deal of money on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Indoor Furniture Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will give you time to explore unique projects and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make mistakes and at some time learning about different projects.
It is very important that you know about different types of wood available for creating projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you’ll need for certain projects you may want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Indoor Furniture Plans practice makes perfect so make sure that you practice your work every day if possible. Try out a lot of designs using a variety of tools so you may find the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to correctly use them and create quality projects.

|

The Benefits of Woodworking Indoor Furniture Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimal amount of tools and equipment. A little home workshop can produce a broad variety of simple projects that can help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will perform your woodworking, based on the size of your home, you might be able to produce a dedicated space into your woodworking activities. This might be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. You can work without bothering the rest of the family. A good compromise might be the garage of your property.

This might help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Indoor Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Indoor Furniture Plans if you can have a dedicated place for a workshop all the better. Floor gear and bench top gear can stay in position from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the start, establish a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Indoor Furniture Plans

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then purchase your quality tools in the regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other local ads. There are plenty of quality lightly used programs out there which belong to individuals who embarked on that one molding project around the house or obtained tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial cost and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a couple added dollars on a inexpensive piece of gear. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to high sound levels. Select effective hearing protection that you find comfortable and effective. These can include earplugs or full ear keyword muff protectors. I find that a quality pair of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust from your hair. With this set up I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may end up being the most versatile tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be used to construct an entire house. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second project. After choosing the right saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut corners. It is ideal for cutting holes in wood also like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not need on your workshop. Buy an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find that your palm sander with just a little bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a few years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps that you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the user to quickly open and close the limbs without dull handle rotation. The wood beamed surfaces on your vice will occasionally need replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most often used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot range. Although in your store you may not be using the tape at these spans, the bigger tape measures provide more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are on your own will be a lot easier, and of course, quality tape measures can endure for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are made equal. Stay away from cheap house brands sold as carpenter’s glue. The cost of glue through all your jobs is a minor cost consideration. Therefore, it makes sense to go with the best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Indoor Furniture Plans

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Floor plan

In architecture and building engineering, a floor plan is a drawing to scale, showing a view from above, of the relationships between rooms, spaces, traffic patterns, and other physical features at one level of a structure.

Dimensions are usually drawn between the walls to specify room sizes and wall lengths. Floor plans may also include details of fixtures like sinks, water heaters, furnaces, etc. Floor plans may include notes for construction to specify finishes, construction methods, or symbols for electrical items.

It is also called a plan which is a measured plane typically projected at the floor height of 4 ft (1.2 m), as opposed to an elevation which is a measured plane projected from the side of a building, along its height, or a section or cross section where a building is cut along an axis to reveal the interior structure.

Video: Woodworking Projects