Jet Woodworking Tools | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re following because most of the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many may still seem unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step by step directions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to locate any project of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Yet, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every conceivable way he could, through easy to understand textual instructions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it is certainly worth buying!

Starting Your First Woodworking Shop Jet Woodworking Tools

Woodworking is one hobby that could also be a rewarding profession if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll be able to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking projects and make a handsome profit. Jet Woodworking Tools.

It requires time to become skilled at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a subject of conversation when you have friends come over to visit. They’ll ask: How can you make it? Where did you get the woodworking programs? Just how long did it take to finish the project? What type of wood did you use? What type of tools did you use? How on earth did you create such a beautiful item of furniture? As you speak about your job, a sense of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Jet Woodworking Tools

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Jet Woodworking Tools.

Begin with an idea in mind of what you would like to build then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for beginners available for purchase from online woodworking retailers. A few woodworking program suggestions to get you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a few. Of course, you can start out with as expansive a woodworking plan as you pick. On the other hand, the chances are if you start out using a little woodworking project initially, you’ll get a better chance of keyword finishing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the quantity and type of wood needed, and the essential hand tools and power tools to complete the project. Note: A word of caution about purchasing woodworking tools. Only buy what you need to complete your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The newcomer needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you might not utilize all that frequently. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry area to work and might need a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the concept is to purchase the essential hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

Jet Woodworking Tools Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way to increase your woodworking craft. When it’s showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Jet Woodworking Tools

If you are a beginner and very interested in doing a DIY project for home then, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your hands is a particular sense. Do not begin a project if you are not interested, as this may land you in a terrible place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start projects that you can complete. If you’re in the middle of a work, then it’s wise to not begin any project in any way.

Starting Your First Woodworking Shop Jet Woodworking Tools

If you keep these vital things in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a beginner, always select a project that has quite a basic build up or a very simple construction. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always move to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Jet Woodworking Tools

Tools would be the ways whereby you can win the battle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available in the market. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking jobs. Dependent on the sort of project you would like to complete, pricing can be determined. The simple the job, the less price it involves. But at the beginning buying the tools will be a little hefty. Because of this, it’s much better to fix a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Directions

Instructions are one of the primary things which each and every beginner should follow. Instructions guide is quite easy to understand the process, what to do and the way to do it. It keyword is a systematic manual for finishing the project. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to reach success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you know the objective of woodworking, the item you want to build, the resources you need to possess and the typical time it’s possible to give every day; then you’re all set to go.

Conclusion, Jet Woodworking Tools

All these strategies and instruction will create the woodworking projects and strategies for novices fast to finish. Always make sure that you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning will help you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Jet Woodworking Tools

Folks if you’re trying to find a way to pass time or desire an alternate method to generate money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which project to begin with since there are jobs that may be too tough for a newbie. But do not be concerned about that because we will provide you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your job you need to know if you have the available tools to work on that project. Try not to invest a lot of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Jet Woodworking Tools

Woodworking in your home will give you time to explore unique projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It’s very important you know more about the different types of wood available for creating jobs. Anticipate carpenters use several types of wood quality for decorating pieces, learning what kind of wood that they use will help you prepare the wood you’ll need for certain jobs you may want to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to fulfill your wants.

Jet Woodworking Tools practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so that you may get the hang of using the tools. When starting out you can make a range of mistakes but with time you will find out how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Jet Woodworking Tools

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of gear and equipment. A little home workshop may produce a wide array of simple projects that can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your home, you may be able to produce a dedicated space to your woodworking tasks. This might be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without bothering the remainder of the household. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Jet Woodworking Tools

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Jet Woodworking Tools if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation is not impossible, at least try to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. In the beginning, establish a bench area where you are able to store and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the seat to house your hands power tools and a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Jet Woodworking Tools

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools in your regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality gently used programs out there that belong to individuals who embarked on that one molding job around the home or obtained tools as presents which they won’t ever use. You can usually buy tools for all these sellers for under half of the initial cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take additional time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a couple added bucks on a inexpensive piece of gear. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to high noise levels. Select effective hearing protection that you find comfortable and effective. These may include earplugs or full ear keyword muff protectors. I find a excellent set of ear muff protectors is ideal for hearing protection.

Lastly, wear a cap to keep the dust from your hair. With this setup I’m shielding my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this can end up being the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to build an entire property. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After selecting the proper saw install an excellent blade. Most skill saws come with a starter blade of lower quality even if they are a good saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this case, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot in the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll find your palm sander using just a bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a set of the maximum clamps which you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle rotation. The timber clamping surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices which won’t crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you might not be using the tape in these lengths, the larger tape steps offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from cheap home brands sold as carpenter’s glue. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to go with the very best. I also have discovered over time that I receive the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Jet Woodworking Tools

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic tools and equipment, everyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

List of tool manufacturers

Video: Woodworking Projects