Joinery Plans Free | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they’re following because all the ideas and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and jobs in Ted’s package quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to understand textual directions, clear images and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Joinery Plans Free

Woodworking is one hobby that can also be a rewarding profession if you love to work together with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Joinery Plans Free.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman level is you will have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It’ll be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you make it? Where did you get the woodworking programs? Just how long did it take to complete the project? What kind of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Joinery Plans Free

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to begin in Woodworking? Joinery Plans Free.

Begin with a concept in your mind of what you want to construct then get a really good woodworking project plan that’s geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking retailers. Of course, you can start out with as expansive a woodworking program as you pick. However, the chances are if you start out using a small woodworking job initially, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to complete the project. Note: A word of caution about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not utilize all that frequently. If you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and might require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which novices will need. You can always add to your toolbox as you gain experience!

Joinery Plans Free Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the authors in woodworking magazines do a story on how to increase your woodworking craft. When it is showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Joinery Plans Free

If you are just beginning and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you might land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not start a project if you’re not interested, as this may land you in a bad location.

2. Think of the primary reason behind creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and examine the time that you have, until you begin with a project.

4. Start projects that you can complete. If you’re in the midst of some work, then it is better not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Joinery Plans Free

If you maintain these vital things in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a newcomer, always select a job that has a very basic construct up or a very simple structure. Some simple to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Joinery Plans Free

Tools are the ways whereby you will win the struggle of woodworking. Many men and women believe power tools are requires. But for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, always assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there on the market. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking projects. Dependent on the sort of project that you want to complete, pricing can be determined. The easy the project, the less price it involves. But at the beginning buying the tools will probably be somewhat hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Directions

Directions are among the primary things which every newcomer should follow. Instructions manual is very simple to understand the process, what to do and the way to get it done. Time also plays an important role in the construction of woodworking projects. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most indispensable thing keyword that can help you to reach success is proper preparation. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, the thing that you need to construct, the resources you need to own and the typical time you can give daily; then you’re all set to go.

Conclusion, Joinery Plans Free

These strategies and instruction is likely to create the woodworking projects and plans for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and preparation can allow you to earn a fantastic woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Joinery Plans Free

People if you’re trying to find a way to pass time or desire an alternative method to make money they generally turn to a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be very careful when choosing which project to start out with since you will find jobs which may be too tough for a newbie. But don’t worry about that because we will provide you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your project you need to be aware of if you have the available tools to work on such a job. Try not to invest a good deal of cash on buying gear when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Joinery Plans Free

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will give you time to explore different jobs and learn a lot of things. That is why it’s very important to spend less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It is extremely important you know about different types of wood available for creating projects. Expect carpenters utilize several types of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you will need for certain jobs you may want to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to fulfill your needs.

Joinery Plans Free practice makes perfect so be sure you practice your work every day if at all possible. Try out a lot of designs using various tools so you can find the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Joinery Plans Free

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A small home workshop can generate a broad array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you’ll perform your woodworking, based on the dimensions of your house, you might have the ability to produce a dedicated space into your woodworking tasks. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Joinery Plans Free

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Joinery Plans Free if you can have a dedicated place for a workshop all the better. Floor tools and bench top gear can stay in place from project to project. If this installation is not hopeless, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a bench area where you can store and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf below the seat to house your hand power tools along with a pegboard over the bench to hang other gear. Install a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Joinery Plans Free

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality gently used programs out there that belong to individuals who stumbled on that 1 molding project around the house or obtained tools as gifts that they won’t ever utilize. You can usually buy tools for all these sellers for less than half of the original cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenses. Weigh the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The excess expense of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this may prove to be the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an whole house. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second job. After selecting the right saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It’s ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want in your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander with a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Begin with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a couple of years to collect a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps that you could spend. You may get in touch with them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no dull handle turning. The wood beamed surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices which won’t crush or damage lots of the different forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Buy a good excellent name brand tape measure with a broad tape typically in the 25-foot range. Even though in your shop you may not use the tape at these lengths, the larger tape steps offer more rigid tapes that will not flop around and slide off the end of boards. Measuring when you’re on your own will be a great deal easier, and of course, quality tape measures can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Joinery Plans Free

Woodworking is referred to as the construction or the production of objects from wood. You can produce a great deal of different items from woodworking and these items are often as large as gazebos or as little as wooden toys. No matter how large or small your personal project maybe you will be quite likely to accomplish that aim with woodworking. Additionally, woodworking has lots of personal as well as emotional benefits! In the following article, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

A lot of people who love to use their hands have turned that love into a profession through woodworking. People who build things from wood are usually known keyword as carpenters. Carpenters can work on a variety of woodworking projects and occupation types. For instance, some carpenters own their carpentry company and these folks have the luxury to place their job hours. This advantage allows carpenters the opportunity to spend more time with their own families and also have less job strain. Raising children is a really tough task no matter what way you approach the endeavor! For a carpenter who possesses their own business, this task might not be hard because that person is going to have more time to become part of his or her child’s lifetime. By playing a bigger role in the life span of your child you’ll be having a larger influence on the type of character that kid develops into, which is a massive concern for any loving parent. Besides these advantages, carpentry can also have health benefits as well.

Woodwork Crafts – The Beginners Guide To Woodworking Joinery Plans Free

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a lot. This results in more physical activity, which results in better physical health. Keeping your body physically fit is really important and keyword will help prevent the incidence of various illnesses later on in life. By being physically fit you can decrease chances that you will have a heart attack, have seizures, become a diabetic, and lower the odds of having a range of different illnesses.

Joinery Plans Free, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too far when I go to home improvement shops and purchase patio furniture, and I am certain that I’m not the only person that has felt like this! A successful business owner once advised me to always increase the sales price of a commodity to double what you got it for. This way, you always have the option to decrease the merchandise to 50 percent off and come out without acquiring any losses. This sounds like it might be exactly the exact same strategy that home improvement stores use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional money and that’s to do with building it yourself. Luckily, there are several really excellent woodworking products that offer thousands of detailed woodworking keyword plans for hundreds of different project types. So, you really can build whatever you want or see in any home improvement store. Doing something does take a bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Magnet Kitchens

Magnet is a British kitchen retailer operating in over two hundred locations across the United Kingdom supplying products under the Magnet and Magnet Trade brands. The company has over 2,000 employees and its headquarters are in Darlington, County Durham.

Magnet was listed on the London Stock Exchange, and was once a constituent of the FTSE 100 Index, but is now part of Nobia UK, a division of the Nobia group which is listed on the Swedish Stock Exchange.' The Nobia division also includes brands such as Gower and Norema.

Magnet was established in Bingley, West Yorkshire in 1918 by Tom Duxbury. Legend has it that Duxbury traded his horse for a firelighting company and named his new company Magnet after the horse. During the 1920s Magnet pioneered the mass production of joinery, door and window products and soon began supplying joinery components for major construction projects. New operations were opened in Keighley, Grays and Knaresborough to satisfy demand for the growing business.

Video: Woodworking Projects