Kitchen Cabinet Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because all the thoughts and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those who are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the net. Ted has done his best to direct them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

Kitchen Cabinet Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. When it’s showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Kitchen Cabinet Woodworking Plans

If you are just beginning and very interested in doing a DIY project for house then, woodworking could be fun. If you do not have the proper information, education, and ability, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a job if you are not interested, because this might land you in a terrible place.

2. Think of the primary reason behind creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a project.

4. Start jobs which you can complete. If you’re in the middle of a work, then it is better not to begin any project at all.

How to Become a Master Woodworker From Your Own Home Kitchen Cabinet Woodworking Plans

If you maintain these vital things in mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to begin with. As a beginner, always pick a project which has a very basic construct up or a simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Kitchen Cabinet Woodworking Plans

Tools would be the ways whereby you will win the battle of woodworking. A lot of men and women think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much easy for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking jobs. Based on the sort of project you would like to finish, pricing can be set. The easy the job, the less cost it involves. But at the very beginning buying the tools will be a little hefty. Because of this, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the basic tools will ensure that you don’t need to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things which each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the procedure, what to do and how to get it done. It keyword is a systematic manual for finishing the job. Time also has an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which can help you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you know the purpose of woodworking, the item that you need to build, the tools you need to possess and the average time it’s possible to give daily; then you are all set to go.

Conclusion, Kitchen Cabinet Woodworking Plans

All these tips and education will create the woodworking projects and plans for beginners fast to complete. Always ensure that you have all the vital tools, materials, area prepared. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Kitchen Cabinet Woodworking Plans

Folks if you’re looking for a way to pass time or want an alternative method to make money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very cautious when choosing which job to start out with because there are jobs that can be too difficult for a newbie. But don’t worry about that since we are going to give you guidelines on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your job you have to know if you have the available tools to work on such a project. Try not to spend a lot of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Kitchen Cabinet Woodworking Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research different jobs and learn so many things. That is why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It is very important that you know about the different kinds of wood available for making jobs. Expect carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood that they use will help you prepare the wood you will need for certain jobs you might want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Kitchen Cabinet Woodworking Plans practice makes perfect so make sure you practice your work daily if possible. Try out a lot of layouts using a variety of tools so you may get the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Kitchen Cabinet Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop can generate a broad variety of simple projects which can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you will perform your woodworking, based on the size of your home, you may be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Kitchen Cabinet Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Kitchen Cabinet Woodworking Plans if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. In the beginning, establish a seat area where you can shop and use most of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the bench to hang other gear. Put in a woodworking at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Kitchen Cabinet Woodworking Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used tools out there that belong to people who embarked on that 1 molding project around the house or received tools as gifts that they will never use. You can usually buy tools for these sellers for less than half of the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a couple added dollars on a cheap piece of equipment. The extra cost of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw following the popular name, this can end up being the most versatile tool in a startup workshop. In fact, in the hands of an expert, a power hand saw could be used to build an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next project. After choosing the right saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid . All these have a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want on your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill piece to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Although the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll find that your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Get a set of the longest clamps that you can spend. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle turning. The timber beamed surfaces on your vice will periodically need replacement. I would rather use soft walnut in my vices which won’t crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your shop you might not use the tape at these spans, the bigger tape measures offer more rigid tapes which won’t flop around and slip off the ending of planks. Measuring when you are by yourself will be a great deal easier, and naturally, quality tape steps can last for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The cost of glue through all of your projects is a little cost consideration. For that reason, it is sensible to go with the best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Kitchen Cabinet Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the profitable skills of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools