Landscaping Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because most of the thoughts and jobs Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the ideal option. There are in fact lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and jobs in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice within this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available throughout the internet. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Starting Your First Woodworking Shop Landscaping Woodworking Projects

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll be able to construct all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your finished woodworking projects and make a handsome profit. Landscaping Woodworking Projects.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will be able to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a subject of conversation whenever you have friends come over to see. They will ask: How did you make it? Where did you get the woodworking plans? How long did it take to complete the job? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you discuss your job, a feeling of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Landscaping Woodworking Projects

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Landscaping Woodworking Projects.

Start with a concept in your mind of what you want to build and then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for novices available for purchase from online woodworking retailers. A couple of woodworking plan suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Obviously, you can begin with as expansive a woodworking plan as you pick. On the other hand, the chances are if you begin with a little woodworking project at first, you’ll have a better prospect of keyword completing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the amount and variety of wood needed, and the essential hand tools and power tools to complete the project. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but you can easily break the bank buying a great deal of tools you may not use all that often. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry area to work and may require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which novices will need. You may always add to your arsenal as you gain experience!

Landscaping Woodworking Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Landscaping Woodworking Projects

If you’re just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you do not have the right information, education, and skill, you may wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first need to be somewhat interested in woodworking. Making something new with your own hands is a special sense. Don’t start a job if you’re not interested, as this may land you at a terrible location.

2. Consider the primary reason for making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a job.

4. Start jobs that you’re able to complete. If you’re in the middle of a work, then it is better to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners Landscaping Woodworking Projects

If you keep these vital points in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs you wish to start with. As a beginner, always select a project which has a very basic construct up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their resources. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Landscaping Woodworking Projects

Tools would be the ways through which you will win the struggle of woodworking. Many people believe power tools are requires. But for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws available in the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it might make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking jobs. Based on the sort of project that you would like to finish, pricing could be set. The easy the job, the less price it involves. But at the very beginning buying the tools will probably be somewhat hefty. Because of this, it is better to fix a budget first on the tools, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things that each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also plays a significant role in the construction of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which can help you to reach success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, the item that you want to build, the resources you need in order to own and the average time you can devote every day; then you are ready to go.

Conclusion, Landscaping Woodworking Projects

All these strategies and education will create the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all the vital tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and planning can help you to make a great woodworking project for your property.

|

Starting Your First Woodworking Shop Landscaping Woodworking Projects

Folks if you’re looking for a way to pass time or desire an alternative method to generate money they generally turn into a hobby that they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which job to begin with since there are projects that may be too tough for a newbie. But do not be concerned about that because we will give you guidelines on the right means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your job you have to be aware of whether you have the available resources to work on such a project. Try not to invest a good deal of money on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Landscaping Woodworking Projects

Woodworking in your home will provide you time to explore unique jobs and find out so many things. That is why it’s very important to invest less money when starting out so you can manage to make mistakes and at some time learning about various jobs.
It’s very important that you know about different types of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you will need for specific projects you might want to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Landscaping Woodworking Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of designs using various tools so you may get the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Landscaping Woodworking Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop may produce a broad array of simple projects that will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to set up your first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without bothering the rest of the household. A fantastic compromise could be the garage of your home.

This can help minimize the problems of dust and sound, however depending on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Landscaping Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Landscaping Woodworking Projects if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation is not impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the start, establish a bench area where you are able to shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf beneath the bench to house your hand power tools and a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Landscaping Woodworking Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality gently used tools out there which belong to people who embarked on that 1 molding project around the house or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will take extra time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a few extra dollars on a inexpensive piece of gear. The excess cost of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the popular brand name, this may prove to be the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be used to construct an entire property. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second job. After choosing the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut curves. It is perfect for cutting holes in wood too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents occur. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you’ll discover that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in timber pieces. {Start with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you could afford. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enabled the user to quickly open and close the limbs with no dull handle rotation. The wood clamping surfaces on your vice will periodically need replacement. I prefer to utilize soft pine in my vices which won’t crush or damage many of the various woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Buy a good excellent name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your store you may not use the tape at these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the end of boards. Measuring when you are by yourself will be a great deal easier, and naturally, quality tape measures can last for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood.

What is Woodworking? The Benefits of Woodworking Landscaping Woodworking Projects

Woodworking is referred to as the construction or the creation of objects from wood. It is possible to produce a great deal of different items from woodworking and these items can be as big as gazebos or as little as wooden toys. However big or small your personal project maybe you will be quite likely to accomplish that aim with woodworking. Additionally, woodworking has many private in addition to psychological benefits! In this guide, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

A lot of people who love to work with their hands have turned that love into a profession through woodworking. Individuals who build things from wood are usually known keyword because carpenters. Carpenters can operate on a number of woodworking projects and occupation types. For example, some carpenters own their carpentry business and these individuals have the luxury to set their work hours. This benefit allows carpenters the chance to spend additional time with their own families and have less job strain. Raising kids is a very tough task regardless of what way you approach the task! For a carpenter who possesses his or her own business, this task may not be as hard because that person will have more time to become part of his or her child’s lifetime. By playing a larger part in the life of your child you will be having a greater influence on the sort of character that kid develops into, which is a huge concern for any loving parent. In addition to such benefits, carpentry can also have health benefits as well.

Starting Your First Woodworking Shop Landscaping Woodworking Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically healthy is vital and keyword can assist in preventing the occurrence of various ailments later on in life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, become a diabetic, and lower the odds of having a number of other illnesses.

Landscaping Woodworking Projects, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I visit home improvement stores and buy patio furniture, and I am certain that I’m not the only person that has felt like this! A successful business owner once told me to always increase the sales price of a commodity to double everything you’ve got it for. In this manner, you can always reduce the product to 50 percent away and come out without acquiring any losses. This sounds like it may be exactly the exact same strategy that home improvement shops use in selling their wooden furniture products. Regardless, there’s a way that it is possible to get around paying the additional cash and that has to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of comprehensive woodworking keyword plans for countless different job types. So, you really can build anything you want or see in almost any home improvement store. Doing something yourself does require a bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Norm Abram

Norman L. "Norm" Abram (born October 3, 1949) is an American carpenter known for his work on the PBS television programs This Old House and The New Yankee Workshop. He is referred to on these shows as a "master carpenter".

Abram was born in Woonsocket, Rhode Island,[1] and raised in Milford, Massachusetts. He attended high school in Milford.[2][3] and studied mechanical engineering and business administration at the University of Massachusetts Amherst,[3] where he became a brother of the Pi Lambda Phi fraternity.

After college, Abram worked for three years as a site supervisor for a multimillion-dollar New England-based construction firm. In 1976, Abram then went into business for himself, founding the general contracting firm Integrated Structures Inc.

Video: Woodworking Projects