Lathe Plans Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re following because most of the thoughts and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People who are only getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s easy step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any job of their choice in this package quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every conceivable way he could, through simple to comprehend textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Lathe Plans Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking publications do a story on how to increase your woodworking craft. When it’s showing you how to apply an end to a completed project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Lathe Plans Woodworking Projects

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking could be fun. If you do not have the right information, instruction, and skill, you might land up spending more time and money than you originally intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Creating something new with your own hands is a particular sense. Don’t begin a job if you’re not interested, as this may land you in a bad location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time you have, until you begin with a job.

4. Start jobs which you can finish. If you are in the midst of some work, then it is wise to not begin any project in any way.

Starting Your First Woodworking Shop Lathe Plans Woodworking Projects

If you maintain these essential points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs you want to start with. As a beginner, always select a job that has quite a basic build up or a very simple construction. A few easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you can always proceed to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Lathe Plans Woodworking Projects

Tools would be the means whereby you will win the struggle of woodworking. Many men and women think that power tools are needs. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You can also purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking jobs. Based on the type of project you want to complete, pricing could be set. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not need to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the primary things which every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also plays an important part in the construction of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which can allow you to reach success is proper planning. With appropriate planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the thing you want to construct, the resources you need to own and the typical time it’s possible to devote every day; then you are ready to go.

Conclusion, Lathe Plans Woodworking Projects

These strategies and education will create the woodworking projects and strategies for novices quickly to finish. Always make sure you have all of the essential tools, materials, area prepared. Keep the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to earn a great woodworking project for your home.

|

Starting Your First Woodworking Shop Lathe Plans Woodworking Projects

People when looking for a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with since there are jobs which may be too tough for a beginner. But don’t be concerned about that since we are going to provide you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you pick your job you have to know whether you have the available tools to work on that project. Try not to invest a lot of cash on buying equipment when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no gap between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Lathe Plans Woodworking Projects

Woodworking at home will give you time to explore different jobs and learn so many things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at some time learning about various projects.
It is very important that you know about the different kinds of wood available for creating projects. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood they use will allow you to prepare the wood you’ll need for specific projects you might want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your wants.

Lathe Plans Woodworking Projects practice makes perfect so make sure you practice your work every day if at all possible. Try out lots of layouts utilizing various tools so you may get the hang of using the tools. When starting out you may earn a number of mistakes but with time you will find out how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Lathe Plans Woodworking Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a broad array of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll do your woodworking, Depending on the size of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first store. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise might be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Lathe Plans Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Lathe Plans Woodworking Projects if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. At the beginning, establish a bench area where you can shop and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf below the bench to house your hand power tools along with a pegboard above the seat to hang other equipment. Put in a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Lathe Plans Woodworking Projects

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. You will find an abundance of quality gently used tools out there that belong to people who stumbled on that 1 molding job around the home or obtained tools as gifts that they will never use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private people will take extra time and possibly travel expenses. Weigh the benefits of traveling across town to save a couple added bucks on a cheap piece of equipment. The excess cost of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this may end up being the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be used to construct an entire house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next project. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade. All these have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut curves. It is perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries occur. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might find that your palm sander with just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the maximum clamps which you could afford. You may contact them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enable the user to quickly open and close the limbs with no tedious handle turning. The wood beamed surfaces on your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Purchase a good quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not use the tape at these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the end of boards. Measuring when you are on your own will be a lot simpler, and naturally, quality tape steps can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The expense of glue through all your jobs is a little cost consideration. For that reason, it makes sense to decide on the very best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Lathe Plans Woodworking Projects

The peaceful gratification of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Speeds and feeds

The phrase speeds and feeds or feeds and speeds refers to two separate velocities in machine tool practice, cutting speed and feed rate. They are often considered as a pair because of their combined effect on the cutting process. Each, however, can also be considered and analyzed in its own right.

Cutting speed (also called surface speed or simply speed) is the speed difference (relative velocity) between the cutting tool and the surface of the workpiece it is operating on. It is expressed in units of distance along the workpiece surface per unit of time, typically surface feet per minute (sfm) or meters per minute (m/min).[1] Feed rate (also often styled as a solid compound, feedrate, or called simply feed) is the relative velocity at which the cutter is advanced along the workpiece; its vector is perpendicular to the vector of cutting speed. Feed rate units depend on the motion of the tool and workpiece; when the workpiece rotates (e.g., in turning and boring), the units are almost always distance per spindle revolution (inches per revolution [in/rev or ipr] or millimeters per revolution [mm/rev]).[2] When the workpiece does not rotate (e.g., in milling), the units are typically distance per time (inches per minute [in/min or ipm] or millimeters per minute [mm/min]), although distance per revolution or per cutter tooth are also sometimes used.[2]

If variables such as cutter geometry and the rigidity of the machine tool and its tooling setup could be ideally maximized (and reduced to negligible constants), then only a lack of power (that is, kilowatts or horsepower) available to the spindle would prevent the use of the maximum possible speeds and feeds for any given workpiece material and cutter material. Of course, in reality those other variables are dynamic and not negligible; but there is still a correlation between power available and feeds and speeds employed. In practice, lack of rigidity is usually the limiting constraint.

Video: Woodworking Tools