Lean To Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are after because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are in fact many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice in this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his best to guide them in every possible way he could, through simple to understand textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always add to your arsenal as you get experience!

Lean To Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story about the best way to increase your woodworking craft. When it’s showing you how to apply an end to a completed job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Lean To Plans

If you’re a beginner and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the right information, education, and ability, you might wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having said, there are a few essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular feeling. Don’t start a job if you are not interested, because this might land you in a bad location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your skills and examine the time that you have, until you start with a job.

4. Start projects that you can finish. If you are in the middle of a work, then it is wise not to start any project in any way.

Starting Your First Woodworking Shop Lean To Plans

If you maintain those vital points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to start with. As a beginner, always pick a project that has quite a basic construct up or a very simple construction. A few simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with forests and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Lean To Plans

Tools would be the ways whereby you can win the struggle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills can make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking projects. Dependent on the sort of job you would like to finish, pricing could be determined. The simple the job, the less price it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it’s much better to fix a budget on the resources, then keyword on the project. Buying the basic tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Directions

Directions are among the principal things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very simple to understand the process, what to do and how to get it done. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to reach success is proper preparation. With proper planning and a plan, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the thing that you want to build, the resources you require to own and the average time you can give daily; then you’re all set to go.

Conclusion, Lean To Plans

These tips and education is likely to make the woodworking projects and strategies for novices quickly to complete. Always ensure you have all of the essential tools, materials, area prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking job for your home.

|

The Benefits of Woodworking Lean To Plans

People when trying to find a way to pass time or want an alternative method to generate money they usually turn into a hobby they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite careful when choosing which project to begin with because there are jobs which can be too tough for a newbie. But don’t be concerned about that because we are going to provide you tips on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, so before you pick your project you have to know if you have the available resources to work on such a job. Try not to invest a good deal of money on purchasing gear when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand and the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Lean To Plans

Woodworking at home will give you time to research unique jobs and find out a lot of things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at some time learning about different jobs.
It is extremely important that you know more about the different kinds of wood available for making projects. Expect carpenters use several types of wood quality for decorating bits, learning which type of wood they use can allow you to prepare the wood you’ll need for specific jobs you might choose to pursue.
Once you know the basics of wood selection and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your needs.

Lean To Plans practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of designs utilizing various tools so you may get the hang of working with the tools. When starting out you may make a number of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Lean To Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of gear and equipment. A little home workshop can produce a wide array of simple projects that can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll do your woodworking, based on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking activities. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the household. A fantastic compromise could be the garage of your property.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Lean To Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Lean To Plans if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. At the beginning, establish a seat area where you are able to store and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hands power tools and a pegboard above the bench to hang other gear. Put in a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Lean To Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. You will find plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents that they will never utilize. You can usually buy tools for all these sellers for less than half of the original cost and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The extra cost of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated sound levels. These may contain earplugs or full ear keyword muff protectors. I find a excellent set of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the popular name, this may prove to be the most versatile instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an whole property. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second job. After choosing the proper saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It is ideal for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll find that your palm sander using a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you could afford. You may contact them for smaller adhesive jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs with no dull handle turning. The wood beamed surfaces on your vice will periodically need replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most often used tools. Buy a good quality name brand tape measure with a wide tape usually from the 25-foot range. Although in your store you might not be using the tape at these lengths, the larger tape steps provide more rigid tapes which won’t flop around and slip off the ending of boards. Measuring when you’re on your own will be a lot simpler, and of course, quality tape steps can endure for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive house brands sold as carpenter’s glue. The cost of adhesive through all your projects is a minor cost consideration. For that reason, it makes sense to decide on the very best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Lean To Plans

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Lean manufacturing

Lean manufacturing or lean production, often simply "lean", is a systematic method for waste minimization ("Muda") within a manufacturing system without sacrificing productivity, which can cause problems. Lean also takes into account waste created through overburden ("Muri") and waste created through unevenness in work loads ("Mura"). Working from the perspective of the client who consumes a product or service, "value" is any action or process that a customer would be willing to pay for.

Lean manufacturing attempts to make obvious what adds value, through reducing everything else (because it is not adding value). This management philosophy is derived mostly from the Toyota Production System (TPS) and identified as "lean" only in the 1990s.[1][page needed], [2] TPS is renowned for its focus on reduction of the original Toyota seven wastes to improve overall customer value, but there are varying perspectives on how this is best achieved. The steady growth of Toyota, from a small company to the world's largest automaker,[3] has focused attention on how it has achieved this success.

Lean principles are derived from the Japanese manufacturing industry. The term was first coined by John Krafcik in his 1988 article, "Triumph of the Lean Production System", based on his master's thesis at the MIT Sloan School of Management.[4] Krafcik had been a quality engineer in the Toyota-GM NUMMI joint venture in California before joining MIT for MBA studies. Krafcik's research was continued by the International Motor Vehicle Program (IMVP) at MIT, which produced the international best-selling book co-authored by James P. Womack, Daniel Jones, and Daniel Roos called The Machine That Changed the World.[1] A complete historical account of the IMVP and how the term "lean" was coined is given by Holweg (2007).[2]

Video: Woodworking Projects