Lees Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re after because most of the thoughts and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right choice. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Starting Your First Woodworking Shop Lees Woodworking Projects

Woodworking is 1 hobby that can also be a rewarding profession if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), effortlessly. You can then sell your finished woodworking projects and make a handsome profit. Lees Woodworking Projects.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will be able to build some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It’ll be a subject of conversation whenever you have friends come over to visit. They will ask: How did you create it? Just how long can it take to complete the job? What kind of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you discuss your work, a feeling of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Lees Woodworking Projects

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Lees Woodworking Projects.

Begin with an idea in your mind of what you want to build and then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for purchase from online woodworking merchants. A couple of woodworking program suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a few. Obviously, you can start out with as expansive a woodworking program as you pick. On the other hand, the chances are if you start out with a small woodworking project initially, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan should include some lists! Length of: woodworking equipment, the quantity and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you might not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry area to work and might require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always increase your arsenal as you get experience!

Lees Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the authors in woodworking magazines do a story about the best way best to improve your woodworking craft. When it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Lees Woodworking Projects

If you’re a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you don’t have the proper information, instruction, and ability, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential factors you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t begin a project if you are not interested, because this might land you in a terrible location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, before you begin with a project.

4. Start jobs which you’re able to finish. If you are in the middle of a work, then it’s better not to begin any project in any way.

The Benefits of Woodworking Lees Woodworking Projects

If you keep those vital points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs that you wish to start with. As a beginner, always select a job that has quite a basic build up or a simple construction. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better knowledge of working with forests and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Lees Woodworking Projects

Tools are the means through which you will win the struggle of woodworking. A lot of men and women believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, constantly check the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you in advance woodworking. You can also buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking jobs. Dependent on the sort of job you want to complete, pricing could be set. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will be a little hefty. Therefore, it’s better to fix a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t need to purchase any more material other than the timber ply.

Time and Instructions

Instructions are one of the primary things that every newcomer should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which can help you to reach success is proper planning. With proper planning and a plan, it is possible to achieve success immediately. If you understand the purpose of woodworking, then the thing you want to build, the tools you need in order to own and the average time it’s possible to devote daily; then you’re all set to go.

Conclusion, Lees Woodworking Projects

All these strategies and instruction is likely to create the woodworking projects and strategies for beginners quickly to complete. Always make sure you have all of the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning will help you to earn a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Lees Woodworking Projects

People when looking for a way to pass time or want an alternate way to make money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be very careful when choosing which project to start out with because there are jobs that may be too difficult for a newbie. But don’t be concerned about that because we are going to provide you tips on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you need to be aware of whether you have the available tools to work on such a job. Try not to spend a lot of money on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any gap between the hand as well as the hands.

The Benefits of Woodworking Lees Woodworking Projects

Woodworking in your home will provide you time to research different projects and find out a lot of things. That is why it’s important to invest less money when starting out so that you can afford to make errors and at some time learning about various projects.
It’s very important you know more about the different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you’ll need for certain projects you may choose to pursue.
Once you know the basics of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to satisfy your needs.

Lees Woodworking Projects practice makes perfect so be sure you practice your work every day if possible. Try out lots of layouts using various tools so you may get the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Lees Woodworking Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop may produce a broad variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you will do your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your first shop. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the top levels of the home. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without bothering the rest of the household. A good compromise might be the garage of your property.

This might help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Lees Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Lees Woodworking Projects if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. At the start, establish a seat area where you are able to store and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the bench to hang additional gear. Put in a woodworking vice at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Lees Woodworking Projects

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools at your regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. There are plenty of quality lightly used tools out there which belong to individuals who stumbled on that one molding project around the house or obtained tools as gifts that they will never use. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money should you make a bundle deal for all their unused equipment. Of course, acquiring tools from private people will require extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few added dollars on a inexpensive piece of equipment. The extra cost of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to high sound levels. Last, wear a cap to keep the dust out of your hair. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the popular brand name, this can prove to be the most flexible tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an entire house. Eventually, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next job. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might find that your palm sander using a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber bits. {Begin with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a set of the maximum clamps which you could afford. You can contact them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the user to rapidly open and close the jaws without tedious handle turning. The timber beamed surfaces in your vice will periodically need replacement. I would rather utilize soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape typically in the 25-foot range. Although in your shop you might not be using the tape in these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the ending of boards. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape steps can last for several years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood.

What is Woodworking? Starting Your First Woodworking Shop Lees Woodworking Projects

Woodworking is known as the construction or the production of objects from wood. It is possible to produce a lot of different items from woodworking and these items are often as large as gazebos or as small as wooden toys. No matter how large or small your personal project maybe you will be quite likely to accomplish that aim with woodworking. In addition, woodworking has many private as well as psychological benefits! In the following guide, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

A lot of people who love to use their hands have turned that love into a career through woodworking. People who build things from wood are usually known keyword as carpenters. Carpenters can operate on a variety of woodworking jobs and occupation types. For example, some carpenters own their carpentry business and these folks have the luxury to place their job hours. This advantage enables carpenters the opportunity to spend more time with their families and also have less job strain. Raising children is a very tough task regardless of what way you approach the endeavor! For a carpenter who possesses their own company, this task might not be hard because that individual will have more time to be a part of his or her child’s lifetime. By playing a bigger part in the life span of your child you will be having a greater impact on the type of character that child develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry can also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Lees Woodworking Projects

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Keeping your body physically healthy is vital and keyword will assist in preventing the incidence of various illnesses in the foreseeable future life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a number of different disorders.

Lees Woodworking Projects, Do It Yourself Woodworking Saves Money:

I feel as I paid way too much when I visit home improvement shops and buy patio furniture, and I am sure that I am not the only person who has felt this way! A successful business owner once told me to constantly raise the sales price of a product to double everything you’ve obtained it for. This way, you can always decrease the merchandise to 50 percent away and come out without acquiring any losses. This seems like it might be exactly the same strategy that home improvement shops use in selling their own wooden furniture products. Regardless, there’s a way which it is possible to get around paying the extra money and that’s to do with building it yourself. Luckily, there are some really excellent woodworking products that offer thousands of comprehensive woodworking keyword strategies for hundreds of different project types. So, you really can build whatever you want or see in almost any home improvement store. Doing something does require a little bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Interior design

Interior design is the art and science of enhancing the interior of a building to achieve a healthier and more aesthetically pleasing environment for the people using the space. An interior designer is someone who plans, researches, coordinates, and manages such projects. Interior design is a multifaceted profession that includes conceptual development, space planning, site inspections, programming, research, communicating with the stakeholders of a project, construction management, and execution of the design.

In the past, interiors were put together instinctively as a part of the process of building.[1] The profession of interior design has been a consequence of the development of society and the complex architecture that has resulted from the development of industrial processes. The pursuit of effective use of space, user well-being and functional design has contributed to the development of the contemporary interior design profession. The profession of interior design is separate and distinct from the role of interior decorator, a term commonly used in the US. The term is less common in the UK, where the profession of interior design is still unregulated and therefore, strictly speaking, not yet officially a profession.

In ancient India, architects used to work as interior designers. This can be seen from the references of Vishwakarma the architect - one of the gods in Indian mythology. Additionally, the sculptures depicting ancient texts and events are seen in palaces built in 17th-century India. In medieval times wall art paintings in India have been a common feature of palace like mansions commonly known as havelis. While most traditional homes are done away with modern buildings, there are around 2000 havelis[2] in the Shekhawati region of Rajashtan that display wall art paintings.

Video: Woodworking Tools