Little Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are following because most of the thoughts and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those who are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s easy step by step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will have the ability to find any job of their choice in this package quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found across the net. Ted has done his best to direct them in every possible way he could, through simple to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You may always increase your toolbox as you gain experience!

Little Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking magazines do a story about how best to increase your woodworking craft. When it is showing you how you can apply a finish to a finished job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Little Wood Projects

If you’re a beginner and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you do not have the right information, instruction, and ability, you may land up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t start a project if you are not interested, as this may land you at a terrible location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs which you’re able to finish. If you are in the midst of some work, then it is better to not start any project at all.

Starting Your First Woodworking Shop Little Wood Projects

If you maintain these vital things in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to start with. As a newcomer, always pick a job that has a very basic construct up or a simple structure. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking jobs, like cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Little Wood Projects

Tools are the means through which you will win the battle of woodworking. A lot of people believe power tools are needs. But for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, always assess the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking jobs. Dependent on the type of job you want to complete, pricing can be determined. The easy the job, the less price it involves. However, at the beginning buying the tools will be a little hefty. Therefore, it is better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t need to buy any more material aside from the timber ply.

Time and Instructions

Directions are one of the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions guide is very simple to comprehend the process, what to do and the way to do it. It keyword is a systematic guide for completing the project. Time also plays an important role in the construction of woodworking projects. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword that can help you to achieve success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the purpose of woodworking, the item that you want to build, the resources you need in order to possess and the average time you can give every day; then you are ready to go.

Conclusion, Little Wood Projects

All these tips and instruction will create the woodworking projects and strategies for beginners fast to complete. Always make sure that you have all of the essential tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and planning can allow you to earn a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Little Wood Projects

People if you’re trying to find a way to pass time or want an alternative way to make money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be very cautious when choosing which project to start out with because there are jobs that can be too tough for a beginner. But do not be concerned about that because we are going to give you guidelines on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you pick your job you have to know whether you have the available tools to work on that project. Try not to spend a lot of money on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand as well as the hands.

The Benefits of Woodworking Little Wood Projects

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will provide you time to research unique projects and find out so many things. That is why it’s important to invest less money when starting out so that you can afford to make errors and at some time learning about different projects.
It is extremely important that you know about the different types of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating bits, learning which type of wood they use will help you prepare the wood you’ll need for specific jobs you might want to pursue.
Once you know the fundamentals of wood choice and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to fulfill your wants.

Little Wood Projects practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of designs using a variety of tools so that you can find the hang of working with the tools. When starting out you may earn a range of errors but with time you will find out how to properly use them and create quality projects.

|

The Benefits of Woodworking Little Wood Projects

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum amount of tools and equipment. A small home workshop can generate a wide variety of simple projects that can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you will perform your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise could be the garage of your property.

This can help minimize the problems of dust and noise, however depending on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Little Wood Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Little Wood Projects if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in place from project to project. If this setup is not impossible, at least try to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. At the start, set up a seat area where you are able to store and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to home your hands power tools along with a pegboard above the bench to hang other equipment. Put in a woodworking at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Little Wood Projects

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools at your local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find plenty of quality gently used tools out there that belong to people who embarked on that one molding project around the home or received tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half of the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling around town to save a few extra bucks on a cheap piece of equipment. The excess cost of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to high noise levels. Select effective hearing protection that you find comfortable and effective. These may contain earplugs or full ear keyword muff protectors. I find that a excellent set of ear muff guards is perfect for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw following the popular name, this can end up being the most flexible instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to construct an entire property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you even start your second project. After selecting the right saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut corners. It’s perfect for cutting holes in timber also like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll find that your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a few years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a set of the maximum clamps that you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no tedious handle turning. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the different forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your store you may not be using the tape in these spans, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you are on your own will be a great deal easier, and naturally, quality tape steps can last for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I also have found over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Little Wood Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Wood

Wood is a porous and fibrous structural tissue found in the stems and roots of trees and other woody plants. It is an organic material, a natural composite of cellulose fibers that are strong in tension and embedded in a matrix of lignin that resists compression. Wood is sometimes defined as only the secondary xylem in the stems of trees,[1] or it is defined more broadly to include the same type of tissue elsewhere such as in the roots of trees or shrubs.[citation needed] In a living tree it performs a support function, enabling woody plants to grow large or to stand up by themselves. It also conveys water and nutrients between the leaves, other growing tissues, and the roots. Wood may also refer to other plant materials with comparable properties, and to material engineered from wood, or wood chips or fiber.

Wood has been used for thousands of years for fuel, as a construction material, for making tools and weapons, furniture and paper. More recently it emerged as a feedstock for the production of purified cellulose and its derivatives, such as cellophane and cellulose acetate.

As of 2005, the growing stock of forests worldwide was about 434 billion cubic meters, 47% of which was commercial.[2] As an abundant, carbon-neutral renewable resource, woody materials have been of intense interest as a source of renewable energy. In 1991 approximately 3.5 billion cubic meters of wood were harvested. Dominant uses were for furniture and building construction.[3]

Video: Woodworking Projects