Log Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because most of the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any job of their choice within this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his very best to direct them in every possible way he could, through easy to comprehend textual instructions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the essential hand and power tools which beginners will need. You can always add to your toolbox as you get experience!

Log Furniture Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. However, if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking magazines do a story about the best way best to increase your woodworking craft. When it is showing you the way you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Log Furniture Plans

If you are just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you don’t have the proper information, education, and skill, you might land up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a few essential aspects you should remember, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Don’t start a project if you’re not interested, as this may land you in a bad location.

2. Think of the main reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and analyze the time that you have, before you begin with a project.

4. Start projects that you’re able to complete. If you’re in the middle of some work, then it is wise to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Log Furniture Plans

If you maintain those essential things in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much as it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you wish to begin with. As a beginner, always pick a project that has a very basic build up or a simple construction. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Log Furniture Plans

Tools would be the means whereby you can win the struggle of woodworking. A lot of men and women believe power tools are needs. But for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, always check the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can even buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking jobs. Based on the sort of project that you would like to complete, pricing could be set. The easy the project, the less price it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it is better to resolve a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Directions

Instructions are among the primary things which every newcomer should follow. Instructions manual is very easy to comprehend the procedure, what to do and how to do it. It keyword is a systematic guide for completing the job. Time also plays a significant part in the construction of woodworking projects. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword that will help you to achieve success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, the thing you want to construct, the resources you need to own and the typical time it’s possible to give every day; then you’re ready to go.

Conclusion, Log Furniture Plans

All these strategies and instruction is likely to make the woodworking projects and plans for beginners fast to complete. Always ensure that you have all the essential tools, materials, space ready. Read the instructions for constructing a product handy. Proper strategy and preparation can help you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Log Furniture Plans

People when trying to find a way to pass time or want an alternate way to generate money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be very careful when choosing which project to start out with since there are projects that can be too difficult for a beginner. But do not worry about that because we will give you guidelines on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you have to know whether you have the available resources to work on such a job. Try not to spend a good deal of cash on purchasing gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Log Furniture Plans

Woodworking at home will provide you time to explore different jobs and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about different projects.
It is very important you know more about different kinds of wood available for making jobs. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning which kind of wood they use will allow you to prepare the wood you will need for certain projects you may choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Log Furniture Plans practice makes perfect so make sure you practice your work every day if possible. Try out lots of designs utilizing a variety of tools so you may get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Log Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal amount of tools and equipment. A little home workshop may generate a broad variety of simple projects which can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops is, clearly, the noise level. You can work without disturbing the rest of the family. A good compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Log Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Log Furniture Plans if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you get more tools and gear. In the start, establish a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard above the seat to hang additional equipment. Put in a woodworking vice at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Log Furniture Plans

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools in the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever use. You can usually purchase tools for these sellers for less than half of the initial price and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and possibly travel expenses. Weigh the advantages of traveling around town to save a few added bucks on a cheap piece of equipment. The extra cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet generated sophisticated and intricate bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can end up being the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be employed to construct an whole house. Eventually, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your next project. After choosing the right saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Purchase an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Start with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you can afford. You can get in touch with them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the user to quickly open and close the limbs without tedious handle turning. The timber clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices that will not crush or damage lots of the various forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your shop you may not use the tape in these lengths, the bigger tape steps offer more rigid tapes which won’t flop around and slide off the ending of boards. Measuring when you’re on your own will be a lot simpler, and naturally, quality tape measures can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The expense of glue through all your projects is a little cost consideration. For that reason, it is sensible to go with the very best. I have also discovered over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Log Furniture Plans

The peaceful satisfaction of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic equipment and tools, everyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Gustav Stickley

Gustav Stickley (March 9, 1858 – April 21, 1942) was an American furniture manufacturer, design leader, publisher and the chief proselytizer for the American Craftsman style, an extension of the British Arts and Crafts movement.

One of eleven children of German émigrés Leopold and Barbara Schlager Stoeckel, Gustav Stickley was born Gustavus Stoeckel on March 9, 1858, in Osceola, Wisconsin. The eldest surviving son, Stickley experienced the rigors of life upon a small Midwestern farm, forgoing his formal education in 1870 to continue work in his father’s field of stonemasonry and help support his struggling family. By early 1876, Stickley’s mother and siblings moved to Brandt, Pennsylvania, where Gustav worked in his uncle’s chair factory – his first formal training in the furniture industry.

With his brothers Charles and Albert, Gustav formed Stickley Brothers & Company in 1883, the same year in which he married Eda Ann Simmons.[1] Within five years, the company was dissolved and Stickley’s ambitions led him to partner with Elgin Simonds, a salesman in the furniture trade, to form the firm of Stickley & Simonds in Binghamton, New York. During the 1890s, Stickley divided his efforts between his new enterprise and, with his brother Leopold, served as a foreman of furniture operations at the Auburn State Prison. In 1898 he orchestrated the removal of his business partner and formed the Gustave Stickley Company (he dropped the use of the "e" in 1903).

Video: Woodworking Tools