Lounge Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they are after because all the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this bundle quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to direct them in every conceivable way he can, through simple to comprehend textual instructions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find within. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools that beginners will need. You can always add to your arsenal as you gain experience!

Lounge Furniture Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way to increase your woodworking craft. Whether it’s showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Lounge Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY project for house then, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you may land up spending more money and time than you initially meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a few essential factors you should remember, before starting with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Do not begin a project if you are not interested, because this might land you at a terrible place.

2. Think of the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start jobs that you’re able to finish. If you’re in the midst of a work, then it is wise to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Lounge Furniture Plans

If you maintain these vital things in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects you want to begin with. As a newcomer, always select a project which has quite a basic build up or a simple construction. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always move to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Lounge Furniture Plans

Tools would be the ways through which you can win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this is not a tool for beginners, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Based on the sort of job you would like to finish, pricing could be set. The simple the project, the less price it involves. However, at the beginning buying the tools will be a little hefty. Because of this, it is much better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things which each and every beginner should follow. Instructions manual is very easy to understand the process, what to do and how to get it done. Time also has a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it’s necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it is likely to achieve success immediately. If you understand the purpose of woodworking, the thing that you want to construct, the tools you require to possess and the typical time it’s possible to give daily; then you are ready to go.

Conclusion, Lounge Furniture Plans

These strategies and education is likely to create the woodworking projects and plans for beginners fast to complete. Always make sure you have all the vital tools, materials, space ready. Read the instructions for building a product handy. Appropriate strategy and planning will allow you to make a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Lounge Furniture Plans

Folks if you’re looking for a way to pass time or want an alternate method to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be quite cautious when choosing which project to begin with because you will find projects that can be too tough for a newbie. But don’t be concerned about that because we are going to give you tips on the right way to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you pick your job you have to be aware of whether you have the available resources to work on that job. Try not to spend a lot of cash on buying equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand as well as the hands.

The Benefits of Woodworking Lounge Furniture Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research unique jobs and find out so many things. That is why it’s very important to spend less money when starting out so that you can afford to make errors and at any time learning about different projects.
It is extremely important you know about the different kinds of wood available for making jobs. Expect carpenters use several kinds of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you will need for specific jobs you might choose to pursue.
Once you understand the basics of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to fulfill your needs.

Lounge Furniture Plans practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts using various tools so that you may find the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly utilize them and create quality projects.

|

The Benefits of Woodworking Lounge Furniture Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a broad variety of simple projects which can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you may be able to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the remainder of the family. A good compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Lounge Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Lounge Furniture Plans if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the start, establish a seat area where you are able to shop and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Lounge Furniture Plans

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, then purchase your quality tools in the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find plenty of quality gently used programs out there that belong to people who embarked on that one molding project around the home or received tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for under half the initial cost and save even more money should you make a package deal for all their unused equipment. Of course, getting tools from private people will take extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple added bucks on a inexpensive piece of equipment. The extra cost of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to high sound levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can prove to be the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be used to construct an whole property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next project. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might discover your palm sander using just a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and fix any imperfections in wood bits. {Begin with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a few years to collect a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Get a set of the longest clamps that you can afford. You may get in touch with them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the user to quickly open and close the limbs without dull handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I would rather utilize soft pine in my vices that won’t crush or damage many of the different woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your shop you might not use the tape in these spans, the larger tape steps offer more rigid tapes which won’t flop around and slide off the ending of boards. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from cheap home brands sold as carpenter’s glue. The expense of glue through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the best. I also have discovered over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Lounge Furniture Plans

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, everyone can learn the profitable skills of his time-tested hobby and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Herman Miller (manufacturer)

Herman Miller, Inc., based in Zeeland, Michigan, is an American company that produces office furniture, equipment and home furnishings. Some signature products are the Equa chair, Aeron chair, Noguchi table, Marshmallow sofa, and the Eames Lounge Chair. Herman Miller is credited with the invention of the office cubicle (originally known as the "Action Office II") in 1968 under then-director of research Robert Propst.[1][2]

Herman Miller was founded in 1905 as the Star Furniture Co. in Zeeland, Michigan.[2] Initially the company produced high quality furniture, especially bedroom suites, in historic revival styles.[2] In 1909, Dirk Jan De Pree began working for the company as a clerk, and became its president by 1919, when it was renamed the Michigan Star Furniture Co.[2] De Pree and his father-in-law, Herman Miller, purchased 51% of the company stock in 1923 and renamed it the Herman Miller Furniture Company. The company reformed as Herman Miller, Inc. in 1960.[2]

Until 1930, the company produced only traditional wood furniture.[2] With the coming of the Great Depression the company was forced to explore new products to survive in a shrinking market[2] and reluctantly hired Gilbert Rohde, a designer who specialized in modernist designs.[2] Rohde turned the company in a totally new direction and in 1933, Herman Miller debuted a line of modern furniture at the Century of Progress exposition in Chicago, Illinois.[2] In 1941, the company opened a showroom in the Merchandise Mart in Chicago, and another in New York City. Under Rohde's supervision Herman Miller entered the contract (office) furniture market in 1942, with the introduction of the "Modular Executive Office" Group (EOG), the first in a long line of office furnishings to be produced by the company.[2]

Video: Woodworking Tools