Lumber Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because all the thoughts and jobs Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this bundle quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Starting Your First Woodworking Shop Lumber Projects

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your finished woodworking projects and make a handsome profit. Lumber Projects.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It’ll be a topic of conversation whenever you have friends come over to visit. They’ll ask: How can you make it? Just how long did it take to finish the project? What kind of wood did you use? What kind of tools did you use? How on earth did you create such a beautiful piece of furniture? As you speak about your job, a sense of pride will encounter you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Lumber Projects

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Lumber Projects.

Begin with a concept in mind of what you want to build and then get a really good woodworking project plan that is geared toward beginners. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a couple. Obviously, you can begin with as expansive a woodworking program as you choose. However, the chances are if you begin with a little woodworking project at first, you will get a better chance of keyword completing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the amount and type of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you want to complete your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not use all that frequently. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Of course, you will require a dry place to work and might require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You can always add to your arsenal as you get experience!

Lumber Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking magazines do a story about the best way best to improve your woodworking craft. When it’s showing you how to apply an end to a completed job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Lumber Projects

If you are a beginner and very interested in doing a DIY project for house then, woodworking could be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a special sense. Don’t begin a job if you are not interested, as this may land you at a terrible place.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you begin with a job.

4. Start jobs which you’re able to complete. If you’re in the midst of a work, then it’s wise not to start any project in any way.

Starting Your First Woodworking Shop Lumber Projects

If you keep those essential points in mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you wish to begin with. As a newcomer, always pick a project that has quite a basic construct up or a very simple structure. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always proceed into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so you have a better knowledge of working with forests and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Lumber Projects

Tools are the means through which you can win the battle of woodworking. Many men and women think that power tools are needs. However, for novices, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available in the marketplace. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking jobs. Based on the type of project you would like to finish, pricing could be set. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Therefore, it is better to fix a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you don’t have to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things which every beginner should follow. Instructions manual is very easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for finishing the job. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to achieve success is proper preparation. With proper planning and a strategy, it is possible to achieve success quickly. If you understand the objective of woodworking, then the item you need to build, the resources you require to own and the average time it’s possible to give daily; then you’re all set to go.

Conclusion, Lumber Projects

These tips and education will make the woodworking projects and strategies for beginners quickly to finish. Always ensure that you have all the vital tools, materials, area prepared. Keep the instructions for constructing an item handy. Proper strategy and planning can allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Lumber Projects

Folks when trying to find a way to pass time or desire an alternate way to make money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based company. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be very careful when choosing which job to start out with since you will find projects that may be too tough for a newbie. But don’t worry about that because we will provide you guidelines on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you have to know if you’ve got the available tools to work on that job. Try not to spend a good deal of money on purchasing gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Lumber Projects

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will provide you time to explore different jobs and learn so many things. That’s why it’s important to spend less money when starting out so that you can afford to make errors and at some time learning about different projects.
It is very important you know about different types of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which type of wood that they use can allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
As soon as you understand the basics of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to fulfill your needs.

Lumber Projects practice makes perfect so make sure you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so that you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Lumber Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A little home workshop may produce a wide variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you will do your woodworking, based on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the rest of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Lumber Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Lumber Projects if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and gear. At the beginning, set up a seat area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the bench to house your hands power tools along with a pegboard over the bench to hang other equipment. Install a woodworking at one end of the bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Lumber Projects

The reach of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. You will find an abundance of quality gently used tools out there which belong to individuals who stumbled on that 1 molding project around the home or received tools as presents that they won’t ever utilize. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and perhaps travel expenses. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of equipment. The excess expense of time and travel in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to elevated sound levels. These may include earplugs or full ear keyword muff protectors. I find a excellent pair of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this may prove to be the most flexible instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw can be employed to construct an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you start your second project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut curves. It is perfect for cutting holes in wood also like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover that your palm sander using a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it usually requires the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the maximum clamps that you can spend. You may get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle rotation. The timber beamed surfaces on your vice will occasionally require replacement. I would rather use soft pine in my vices that will not crush or damage lots of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you might not use the tape at these lengths, the larger tape steps offer more rigid tapes that won’t flop around and slip off the ending of boards. Assessing when you are on your own will be a lot simpler, and naturally, quality tape steps can endure for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles as well as chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The expense of adhesive through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the very best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Lumber Projects

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Lumber

Lumber (North American English) or timber (used in the rest of the English-speaking world) is a type of wood that has been processed into beams and planks, a stage in the process of wood production. Lumber is mainly used for structural purposes but has many other uses as well.

There are two main types of lumber. It may be supplied either rough-sawn, or surfaced on one or more of its faces. Besides pulpwood, rough lumber is the raw material for furniture-making and other items requiring additional cutting and shaping. It is available in many species, usually hardwoods; but it is also readily available in softwoods, such as white pine and red pine, because of their low cost.[1]

Finished lumber is supplied in standard sizes, mostly for the construction industry – primarily softwood, from coniferous species, including pine, fir and spruce (collectively spruce-pine-fir), cedar, and hemlock, but also some hardwood, for high-grade flooring. It is more commonly made from softwood than hardwoods, and 80% of lumber comes from softwood.[2]

Video: Woodworking Tools