Make Something Out Of Wood | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re following because all the thoughts and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure if they should be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are actually many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are just getting started will find the thoughts and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice within this package quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the internet. Ted has done his very best to guide them in every possible way he could, through easy to understand textual directions, clear images and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools which novices will need. You may always increase your toolbox as you get experience!

Make Something Out Of Wood Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it’s showing you how to apply an end to a finished job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Make Something Out Of Wood

If you’re a beginner and very interested in doing a DIY project for home then, woodworking could be interesting. If you do not have the proper information, education, and ability, you might wind up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a special sense. Do not start a project if you are not interested, as this may land you in a terrible location.

2. Think of the primary reason behind creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, before you start with a job.

4. Start jobs that you can complete. If you are in the middle of some work, then it is wise not to begin any project at all.

Finding Woodworking Projects and Plans for Beginners Make Something Out Of Wood

If you maintain these essential points in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects you want to start with. As a newcomer, always select a job which has quite a basic construct up or a simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Make Something Out Of Wood

Tools are the means whereby you will win the battle of woodworking. Many people believe power tools are needs. But for novices, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there on the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them will help you ahead of time woodworking. You might even buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking projects. Dependent on the sort of project that you want to finish, pricing could be set. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will make certain you do not have to purchase any more material other than the wood ply.

Time and Directions

Directions are one of the principal things which every newcomer should follow. Instructions guide is very easy to understand the process, what to do and the way to do it. Time also has a significant part in the construction of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, then the thing you want to build, the resources you need to possess and the typical time you can devote every day; then you are all set to go.

Conclusion, Make Something Out Of Wood

All these strategies and instruction will make the woodworking projects and plans for beginners fast to complete. Always make sure that you have all of the essential tools, materials, space ready. Read the instructions for building an item handy. Proper strategy and preparation will help you to make a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Make Something Out Of Wood

People when looking for a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which job to begin with since there are jobs which can be too difficult for a beginner. But don’t be concerned about that since we are going to provide you tips on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you have to know if you have the available resources to work on that project. Try not to invest a good deal of cash on purchasing equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Make Something Out Of Wood

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking at home will provide you time to explore unique projects and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It’s very important that you know more about the different types of wood available for making jobs. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood they use can help you prepare the wood you will need for specific jobs you may want to pursue.
As soon as you understand the basics of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your needs.

Make Something Out Of Wood practice makes perfect so make sure you practice your work every day if at all possible. Try out a lot of layouts utilizing a variety of tools so that you may find the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Make Something Out Of Wood

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum amount of gear and equipment. A little home workshop may generate a wide array of simple projects that can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you’ll do your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the rest of the household. A fantastic compromise could be the garage of your property.

This can help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Make Something Out Of Wood

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Make Something Out Of Wood if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in place from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. At the beginning, establish a seat area where you are able to store and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard over the seat to hang other gear. Put in a woodworking vice at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Make Something Out Of Wood

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools at your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. There are an abundance of quality lightly used tools out there which belong to individuals who embarked on that one molding project around the house or obtained tools as gifts which they will never use. You can usually purchase tools for these sellers for under half the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenses. Weigh the advantages of traveling around town to save a few extra dollars on a cheap piece of gear. The extra cost of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to high noise levels. These can include earplugs or full ear keyword muff protectors. I find a quality pair of ear muff guards is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. With this setup I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the popular brand name, this may end up being the most flexible instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw could be employed to construct an whole property. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second job. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot just cut corners. It is perfect for cutting holes in timber also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might find that your palm sander with just a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Begin with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the maximum clamps which you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs without dull handle turning. The timber clamping surfaces on your vice will periodically need replacement. I would rather use soft walnut in my vices that will not crush or damage lots of the different forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most often used tools. Purchase a good quality name brand tape measure with a wide tape typically from the 25-foot selection. Although in your store you might not use the tape at these spans, the bigger tape steps offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you are by yourself will be a great deal easier, and of course, quality tape measures can last for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Make Something Out Of Wood

Woodworking is known as the construction or the creation of items from wood. You can create a lot of different items from woodworking and these objects are often as large as gazebos or as little as wooden toys. No matter how big or small your private project maybe you will be quite likely to accomplish that goal with woodworking. Additionally, woodworking has many personal in addition to psychological benefits! In this guide, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things out of wood are usually known keyword because carpenters. Carpenters can operate on a number of woodworking projects and job types. For example, some carpenters possess their carpentry company and these individuals have the luxury to set their job hours. This advantage enables carpenters the opportunity to spend additional time with their own families and have less job strain. Raising kids is a really difficult task no matter what way you approach the task! For a carpenter who owns their own company, this task might not be hard since that person will have more time to be a part of her or his child’s lifetime. By playing a bigger part in the life span of your child you will be having a greater impact on the sort of personality that child develops into, which is a huge concern for any loving parent. Besides such advantages, carpentry may also have health benefits too.

The Benefits of Woodworking Make Something Out Of Wood

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a whole lot. This results in more physical activity, which results in better physical health. Keeping your body physically healthy is really important and keyword can help prevent the incidence of various illnesses later on in life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and lower the chances of giving birth to a number of different illnesses.

Make Something Out Of Wood, Do It Yourself Woodworking Saves Cash:

I feel as I paid way too much when I go to home improvement stores and purchase patio furniture, and I am sure that I am not the only person who has felt like this! A successful business owner once advised me to always raise the sales price of a commodity to double everything you obtained it for. This way, you can always decrease the product to 50 percent away and still come out without getting any losses. This seems like it may be the same tactic that home improvement stores use in selling their own wooden furniture solutions. Regardless, there’s a way that you can get around paying the additional cash and that has to do with building it yourself. Luckily, there are some really excellent woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. So, you really can build anything you need or see in any home improvement store. Doing something yourself does require a little bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Knocking on wood

Knocking on wood – in Britain, Australia, New Zealand, South Africa and Ireland the phrase is touch wood – is an apotropaic tradition of literally touching, tapping, or knocking on wood, or merely stating that one is doing or intending to do so, in order to avoid "tempting fate" after making a favorable prediction or boast, or a declaration concerning one's own death or another unfavorable situation. In some versions of the tradition, only one person, the speaker, is meant to "knock on wood".[citation needed]

The origin of the custom may be in German folklore, where in supernatural beings are thought to live in trees, and can be invoked for protection. One explanation states that the tradition derived from the Pagans who thought that trees were the homes of fairies, spirits, dryads and many other mystical creatures. In these instances, people might knock or touch wood to request good luck, or to distract spirits with evil intentions. When in need of a favour or some good luck, one politely mentioned this wish to a tree and then touched the bark, representing the first "knock". The second "knock" was to say "thank you". The knocking was also supposed to prevent evil spirits from hearing your speech and as such stop them from interfering. Alternatively, some traditions have it that by knocking upon wood, you would awaken and release the benevolent wood fairies that dwelt there.[citation needed]

Video: Woodworking Tools