Make Wooden Craft Ideas | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are following because all the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every conceivable way he can, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools that novices will need. You may always increase your toolbox as you get experience!

Make Wooden Craft Ideas Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the authors in woodworking publications do a story on the best way to increase your woodworking craft. Whether it is showing you how you can apply an end to a finished job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Make Wooden Craft Ideas

If you are a beginner and very enthusiastic about doing a DIY project for house then, woodworking could be interesting. If you do not have the right information, education, and skill, you may wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a job if you are not interested, as this may land you at a terrible location.

2. Consider the main reason for making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, until you start with a project.

4. Start jobs that you can finish. If you’re in the middle of a work, then it’s better not to begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Make Wooden Craft Ideas

If you maintain these essential points in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to begin with. As a beginner, always select a project that has a very basic construct up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Make Wooden Craft Ideas

Tools would be the means whereby you will win the struggle of woodworking. Many people believe power tools are needs. However, for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You can also buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking jobs. Based on the sort of job that you want to finish, pricing can be set. The easy the job, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you do not have to purchase any more material other than the wood ply.

Time and Instructions

Directions are one of the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and the way to do it. Time also has an important role in the building of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, then the item you want to build, the tools you require in order to own and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Make Wooden Craft Ideas

These tips and instruction is likely to create the woodworking projects and plans for novices quickly to complete. Always make sure you have all of the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to earn a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Make Wooden Craft Ideas

Folks if you’re trying to find a way to pass time or desire an alternative way to make money they generally turn to a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can think of. When starting out you have to be quite cautious when choosing which project to start out with since you will find jobs which may be too tough for a newbie. But do not worry about that since we are going to provide you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you pick your project you have to know whether you have the available tools to work on such a project. Try not to invest a lot of cash on buying gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand and the hands.

Starting Your First Woodworking Shop Make Wooden Craft Ideas

Woodworking at home will provide you time to explore unique projects and learn so many things. That is why it’s important to invest less money when starting out so you can afford to make errors and at any time learning about different projects.
It is extremely important you know about different types of wood available for making jobs. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you’ll need for certain projects you may want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to fulfill your wants.

Make Wooden Craft Ideas practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Make Wooden Craft Ideas

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A small home workshop can produce a wide array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will perform your woodworking, Depending on the size of your home, you might have the ability to create a dedicated space into your woodworking activities. This might be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops would be, of course, the sound level. You can work without disturbing the rest of the family. A fantastic compromise might be the garage of your property.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Make Wooden Craft Ideas

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Make Wooden Craft Ideas if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. At the start, establish a bench area where you can store and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will let you work comfortably while standing. Add a sturdy shelf beneath the bench to house your hand power tools along with a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Make Wooden Craft Ideas

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools in your local building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. You will find an abundance of quality gently used programs out there which belong to people who embarked on that 1 molding project around the house or received tools as presents that they won’t ever use. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few extra bucks on a inexpensive piece of gear. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet generated sophisticated and complex pieces. Focus on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to elevated noise levels. Select powerful hearing protection which you find comfortable and effective. These can contain earplugs or full ear keyword muff protectors. I find a quality pair of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this can prove to be the most versatile tool in a startup workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire property. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next project. After selecting the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut corners. It’s perfect for cutting holes in timber too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might discover that your palm sander with just a bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps which you can afford. You can contact them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws without dull handle rotation. The wood clamping surfaces in your vice will occasionally need replacement. I would rather use soft walnut in my vices that will not crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Buy a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot range. Even though in your store you might not be using the tape at these spans, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you’re on your own will be a great deal easier, and naturally, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of glue through all of your projects is a little cost consideration. For that reason, it makes sense to go with the very best. I have also discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Make Wooden Craft Ideas

The peaceful satisfaction of woodworking is an excellent experience in this day and age of rushed lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Arts and Crafts movement

The Arts and Crafts movement was an international trend in the decorative and fine arts that began in Britain and flourished in Europe and America between about 1880 and 1920, emerging in Japan in the 1920s as the Mingei movement. It stood for traditional craftsmanship using simple forms, and often used medieval, romantic, or folk styles of decoration. It advocated economic and social reform and was essentially anti-industrial.[1][2][3] It had a strong influence on the arts in Europe until it was displaced by Modernism in the 1930s,[4] and its influence continued among craft makers, designers, and town planners long afterwards.[5]

The term was first used by T. J. Cobden-Sanderson at a meeting of the Arts and Crafts Exhibition Society in 1887,[6] although the principles and style on which it was based had been developing in England for at least 20 years. It was inspired by the ideas of architect Augustus Pugin, writer John Ruskin, and designer William Morris.[7]

The movement developed earliest and most fully in the British Isles[4] and spread across the British Empire and to the rest of Europe and America.[8] It was largely a reaction against the perceived impoverishment of the decorative arts at the time and the conditions in which they were produced.[1]

Video: Woodworking Tools