Making Things With Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re after because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are just getting started will find the thoughts and projects in Ted’s package quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice within this package quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Making Things With Wood Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the writers in woodworking publications do a story on how best to increase your woodworking craft. When it is showing you the way to apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Making Things With Wood

If you are just beginning and very enthusiastic about doing a DIY job for house then, woodworking could be interesting. If you don’t have the proper information, education, and skill, you may wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a job if you’re not interested, because this might land you at a bad location.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, until you start with a job.

4. Start jobs that you can complete. If you are in the midst of a work, then it’s better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Making Things With Wood

If you keep these essential points in mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a newcomer, always select a job that has a very basic build up or a simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you could always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so you have a better comprehension of working with woods and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Making Things With Wood

Tools are the ways through which you can win the battle of woodworking. Many people think that power tools are needs. But for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you buy a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the market. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking jobs. Based on the sort of job you would like to finish, pricing can be set. The easy the project, the less price it involves. However, at the very beginning buying the tools will be somewhat hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the project. Buying the fundamental tools will ensure that you don’t need to purchase any more material other than the wood ply.

Time and Instructions

Instructions are among the principal things that each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite simple to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the job. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that will help you to reach success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the thing you want to build, the tools you require in order to possess and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Making Things With Wood

These strategies and instruction will create the woodworking projects and strategies for novices quickly to complete. Always make sure you have all of the essential tools, materials, space ready. Read the instructions for constructing a product handy. Appropriate strategy and planning will allow you to make a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Making Things With Wood

Folks if you’re looking for a way to pass time or want an alternate way to make money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which job to start out with because you will find jobs that may be too tough for a beginner. But don’t worry about that because we are going to give you guidelines on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your job you need to be aware of whether you’ve got the available tools to work on that project. Try not to invest a good deal of cash on purchasing equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no gap between the artistic hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Making Things With Wood

Woodworking in your home will give you time to explore different jobs and learn so many things. That is why it’s important to invest less money when starting out so that you can manage to make errors and at some time learning about different jobs.
It’s extremely important that you know about different kinds of wood available for creating jobs. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood they use will help you prepare the wood you’ll need for certain jobs you may want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to fulfill your wants.

Making Things With Wood practice makes perfect so be sure you practice your work daily if possible. Try out lots of layouts using a variety of tools so you may find the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to properly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Making Things With Wood

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a broad variety of simple projects that will help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you’ll do your woodworking, Depending on the size of your house, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your first shop. A heated shop detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Making Things With Wood

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Making Things With Wood if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard over the bench to hang other gear. Put in a woodworking at one end of the bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Making Things With Wood

The reach of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in your regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. There are plenty of quality lightly used programs out there which belong to people who stumbled on that 1 molding job around the house or obtained tools as presents that they won’t ever use. You can usually buy tools for all these sellers for less than half of the initial price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and possibly travel expenditures. Weigh the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The excess cost of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to high noise levels. Select effective hearing protection which you find comfortable and effective. These can include earplugs or complete ear keyword muff protectors. I find a quality set of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the popular brand name, this may prove to be the most versatile instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be used to build an whole house. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next job. After choosing the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut corners. It’s perfect for cutting holes in timber too like handle slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries occur. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll find that your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Get a set of the longest clamps which you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to rapidly open and close the jaws without dull handle rotation. The wood clamping surfaces in your vice will periodically require replacement. I would rather use soft pine in my vices which won’t crush or damage lots of the different woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not use the tape at these spans, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of planks. Assessing when you are on your own will be a great deal simpler, and of course, quality tape measures can endure for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are made equal. Avoid cheap house brands marketed as carpenter’s glue. The expense of glue through all of your projects is a minor cost consideration. Therefore, it is sensible to decide on the best. I also have found over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Making Things With Wood

The peaceful gratification of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic tools and equipment, everyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected]lligence.com – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Knocking on wood

Knocking on wood – in Britain, Australia, New Zealand, South Africa and Ireland the phrase is touch wood – is an apotropaic tradition of literally touching, tapping, or knocking on wood, or merely stating that one is doing or intending to do so, in order to avoid "tempting fate" after making a favourable observation, a boast, or declaration concerning one's own death or other unfavorable situation beyond one's control. Only the spoken party (a singular person) is to actually "knock on wood" at a time.

The origin of the custom may be in German folklore, where in supernatural beings are thought to live in trees, and can be invoked for protection. One explanation states that the tradition derived from the Pagans who thought that trees were the homes of fairies, spirits, dryads and many other mystical creatures. In these instances, people might knock or touch wood to request good luck, or to distract spirits with evil intentions. When in need of a favour or some good luck, one politely mentioned this wish to a tree and then touched the bark, representing the first "knock". The second "knock" was to say "thank you". The knocking was also supposed to prevent evil spirits from hearing your speech and as such stop them from interfering. Alternatively, some traditions have it that by knocking upon wood, you would awaken and release the benevolent wood fairies that dwelt there.[citation needed]

Video: Woodworking Projects