Mantels Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re following because most of the thoughts and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are actually many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice within this package quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available across the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Mantels Woodworking Plans

Woodworking is one hobby that could also be a rewarding profession if you like to work with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Mantels Woodworking Plans.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman level is you will be able to create some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It’ll be a subject of conversation when you have friends come over to visit. They’ll ask: How did you create it? Where did you get the woodworking programs? Just how long did it take to complete the project? What kind of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you discuss your work, a sense of pride will come over you and do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Mantels Woodworking Plans

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Mantels Woodworking Plans.

Begin with a concept in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for novices available for purchase from online woodworking retailers. A couple of woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a few. Obviously, you can begin with as grand a woodworking program as you choose. However, the chances are if you begin with a little woodworking project initially, you will have a better prospect of keyword completing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking tools, but you can easily break the bank buying a great deal of tools you might not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry place to work and may require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your arsenal as you get experience!

Mantels Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Each month the authors in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it is showing you the way to apply an end to a completed project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Mantels Woodworking Plans

If you are just beginning and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you do not have the right information, education, and skill, you may land up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Do not start a job if you’re not interested, because this might land you at a terrible location.

2. Think of the primary reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start projects that you’re able to finish. If you’re in the midst of some work, then it’s better to not begin any project at all.

Starting Your First Woodworking Shop Mantels Woodworking Plans

If you maintain these vital things in your mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to start with. As a beginner, always pick a job which has quite a basic construct up or a very simple construction. Some easy to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you can always move into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so that you have a better knowledge of working with forests and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Mantels Woodworking Plans

Tools are the ways whereby you can win the battle of woodworking. A lot of men and women think that power tools are requires. But for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available in the marketplace. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed price on woodworking jobs. Dependent on the type of job that you would like to finish, pricing could be set. The easy the project, the less price it involves. However, at the very beginning buying the tools will be somewhat hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Directions

Directions are among the primary things which every newcomer should follow. Instructions manual is very easy to comprehend the procedure, what to do and how to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and therefore it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which will help you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing you want to build, the tools you need in order to own and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Mantels Woodworking Plans

These tips and instruction will create the woodworking projects and plans for novices quickly to finish. Always make sure you have all of the essential tools, materials, space prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning can allow you to make a great woodworking project for your home.

|

The Benefits of Woodworking Mantels Woodworking Plans

People when trying to find a way to pass time or desire an alternate way to make money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which project to start out with since you will find jobs that can be too tough for a newbie. But don’t worry about that because we will give you guidelines on the right means to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your project you have to know if you have the available resources to work on that project. Try not to invest a lot of money on purchasing equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Mantels Woodworking Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will provide you time to explore different jobs and learn so many things. That’s why it’s important to spend less money when starting out so that you can afford to make errors and at some time learning about different projects.
It is extremely important you know about the different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which type of wood that they use will allow you to prepare the wood you will need for specific jobs you might want to pursue.
As soon as you understand the basics of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to satisfy your wants.

Mantels Woodworking Plans practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of designs utilizing various tools so that you may find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Mantels Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad array of simple projects which will allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you will do your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns located in the basement draw dust up into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your property.

This might help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Mantels Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Mantels Woodworking Plans if you can have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. In the beginning, establish a bench area where you are able to shop and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the seat to home your hand power tools along with a pegboard over the bench to hang additional gear. Put in a woodworking vice at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Mantels Woodworking Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools at your regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality gently used tools out there that belong to people who stumbled on that one molding project around the house or obtained tools as presents which they will never use. You can usually buy tools for all these sellers for under half of the initial price and save even more money should you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh the benefits of traveling across town to save a few extra dollars on a inexpensive piece of equipment. The extra expense of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite name, this may end up being the most flexible tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be used to build an entire property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut curves. It’s perfect for cutting holes in timber also like manage slots. At some point, you’ll want to get a ring saw. Bandsaws are much more versatile but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might discover that your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll find that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Start with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it usually requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you could spend. You can contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to quickly open and close the limbs without dull handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices which won’t crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape typically in the 25-foot selection. Although in your shop you may not be using the tape at these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. The cost of adhesive through all your jobs is a little cost consideration. For that reason, it makes sense to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Mantels Woodworking Plans

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Brook Hall (Virginia)

Brook Hall is a historic home located at Glade Spring, Washington County, Virginia. It was built about 1830, and is a large two-story, five bay, "T" plan, Federal style brick dwelling. The house has a four-bay, two-story brick wing. The interior retains spectacular carved woodwork as well as very early, possibly original, paint on woodgrained doors and marbled mantels and baseboards. Also on the property is a contributing spring house.[3]

Video: Woodworking Projects