Middle School Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because most of the thoughts and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are actually many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. People who are only getting started will find the ideas and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step by step directions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any job of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to guide them in every possible way he could, through easy to understand textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools , but the idea is to purchase the essential hand and power tools that novices will need. You may always increase your arsenal as you get experience!

Middle School Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking publications do a story on how to increase your woodworking craft. Whether it is showing you the way to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Middle School Woodworking Projects

If you’re a beginner and very interested in doing a DIY project for home afterward, woodworking could be interesting. If you don’t have the proper information, instruction, and ability, you may land up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not start a job if you are not interested, as this may land you in a terrible location.

2. Think of the primary reason for making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a job.

4. Start projects which you can finish. If you are in the midst of a work, then it is better not to begin any project in any way.

Starting Your First Woodworking Shop Middle School Woodworking Projects

If you keep those vital points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you wish to begin with. As a newcomer, always select a project that has a very basic construct up or a simple structure. A few simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always proceed into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better comprehension of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Middle School Woodworking Projects

Tools are the means through which you will win the struggle of woodworking. A lot of people think that power tools are needs. However, for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking jobs. Based on the type of job you would like to complete, pricing can be determined. The simple the project, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it is better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t need to purchase any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions guide is very easy to understand the procedure, what to do and the way to do it. Time also plays a significant role in the building of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword which will help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the thing that you want to construct, the resources you need to possess and the typical time you can give daily; then you’re all set to go.

Conclusion, Middle School Woodworking Projects

These tips and instruction is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure that you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will help you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Middle School Woodworking Projects

People if you’re trying to find a way to pass time or desire an alternate way to make money they generally turn to a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be quite cautious when choosing which project to start out with because you will find projects that can be too tough for a beginner. But don’t worry about that since we will provide you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your project you need to know whether you have the available resources to work on such a project. Try not to invest a lot of cash on buying gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand and the normal hands.

Starting Your First Woodworking Shop Middle School Woodworking Projects

Woodworking at home will provide you time to research unique projects and learn a lot of things. That is why it’s important to invest less money when starting out so you can afford to make errors and at any time learning about various jobs.
It’s extremely important that you know about the different kinds of wood available for making projects. Anticipate carpenters use several types of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you’ll need for certain jobs you may choose to pursue.
Once you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your needs.

Middle School Woodworking Projects practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of layouts using a variety of tools so you can find the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to correctly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Middle School Woodworking Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of gear and equipment. A little home workshop can produce a broad array of simple projects that will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you’ll perform your woodworking, Depending on the size of your home, you may be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the remainder of the household. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Middle School Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Middle School Woodworking Projects if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a seat area where you can shop and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to home your hand power tools along with a pegboard above the seat to hang other equipment. Install a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Middle School Woodworking Projects

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, purchase your quality tools at the local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality gently used programs out there that belong to people who embarked on that 1 molding project around the house or obtained tools as gifts that they will never use. You can usually buy tools for these sellers for less than half of the initial price and save even more money should you make a package deal for all their unused equipment. Of course, getting tools from private people will take additional time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a few extra dollars on a inexpensive piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal quantity of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to elevated noise levels. Select effective hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can prove to be the most versatile tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be used to construct an entire property. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After selecting the proper saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade. These possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might discover your palm sander using a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in timber pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps that you can afford. You can get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I would rather use soft pine in my vices which will not crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your store you may not be using the tape at these lengths, the larger tape steps provide more rigid tapes that will not flop around and slip off the end of boards. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape steps can last for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The expense of adhesive through all your projects is a little cost consideration. Therefore, it is sensible to decide on the best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Middle School Woodworking Projects

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Projects