Mini Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact lots of things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those who are only getting started will find the thoughts and projects in Ted’s bundle quite easy. No doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every conceivable way he can, through simple to understand textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Mini Wood Projects

Woodworking is 1 hobby that could also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to construct all types of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Mini Wood Projects.

It requires time to become skilled at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living room. It’ll be a topic of conversation whenever you have friends come over to visit. They’ll ask: How did you create it? Where did you get the woodworking programs? Just how long did it take to finish the project? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you discuss your job, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Mini Wood Projects

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Mini Wood Projects.

Begin with an idea in mind of what you would like to construct and then get a really good woodworking project plan that is geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can start out with as grand a woodworking plan as you pick. However, the chances are if you start out with a little woodworking job at first, you will get a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and type of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking tools, but you can easily break the bank purchasing a lot of tools you may not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Of course, you will require a dry place to work and might need a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

Mini Wood Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the authors in woodworking magazines do a story about how to improve your woodworking craft. When it’s showing you how to apply an end to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Mini Wood Projects

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not start a project if you’re not interested, as this may land you in a bad place.

2. Think of the main reason behind creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and analyze the time you have, until you begin with a job.

4. Start jobs that you’re able to finish. If you’re in the midst of some work, then it’s better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Mini Wood Projects

If you maintain these vital things in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a beginner, always select a job that has a very basic build up or a simple structure. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Mini Wood Projects

Tools are the ways through which you can win the struggle of woodworking. Many people think that power tools are requires. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can also buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but using it would make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking projects. Dependent on the sort of job that you want to complete, pricing could be set. The easy the project, the less price it involves. However, at the very beginning buying the tools will be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you don’t have to purchase any more material other than the wood ply.

Time and Instructions

Directions are among the primary things that every beginner should follow. Instructions guide is very easy to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the job. Time also plays an important role in the construction of woodworking projects. Woodworking projects require time and so it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most indispensable thing keyword that will help you to reach success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you know the objective of woodworking, then the item you want to construct, the tools you need in order to possess and the average time you can devote every day; then you’re all set to go.

Conclusion, Mini Wood Projects

All these tips and education is likely to make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all the essential tools, materials, space ready. Read the instructions for building an item handy. Proper strategy and planning can help you to earn a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Mini Wood Projects

Folks if you’re trying to find a way to pass time or want an alternate method to make money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be quite cautious when choosing which project to begin with because there are jobs which may be too difficult for a newbie. But do not worry about that because we will give you guidelines on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your job you need to know if you have the available resources to work on that project. Try not to spend a good deal of money on buying equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Mini Wood Projects

Woodworking at home will give you time to research different jobs and learn a lot of things. That is why it’s very important to spend less money when starting out so you can manage to make errors and at some time learning about various projects.
It is extremely important you know more about the different kinds of wood available for creating jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood they use will allow you to prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to satisfy your needs.

Mini Wood Projects practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts using various tools so you may get the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will find out how to properly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Mini Wood Projects

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a wide variety of simple projects that can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll do your woodworking, Depending on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Mini Wood Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Mini Wood Projects if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the start, establish a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf beneath the bench to house your hand power tools and a pegboard above the bench to hang additional gear. Install a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Mini Wood Projects

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, purchase your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. There are plenty of quality gently used tools out there that belong to individuals who stumbled on that 1 molding job around the home or obtained tools as presents that they will never utilize. You can usually purchase tools for these sellers for less than half the original price and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private people will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a couple added bucks on a cheap piece of equipment. The extra expense of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw following the popular brand name, this may prove to be the most versatile instrument in a startup workshop. In fact, in the hands of an expert, a power hand saw can be used to build an whole house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your next project. After selecting the right saw install a quality blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It is perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need on your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might discover that your palm sander with a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you could afford. You may get in touch with them for smaller adhesive jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the user to quickly open and close the limbs without tedious handle rotation. The wood clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most often used tools. Purchase a good quality name brand tape measure with a wide tape typically from the 25-foot range. Although in your store you may not be using the tape at these spans, the larger tape measures provide more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you are on your own will be a great deal simpler, and naturally, quality tape steps can endure for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Get the number three and two Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to decide on the best. I also have discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Mini Wood Projects

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Mini

The Mini is a small economy car produced by the English-based British Motor Corporation (BMC) and its successors from 1959 until 2000. The original is considered an icon of 1960s British popular culture.[8][9][10][11] Its space-saving transverse engine, front-wheel drive layout – allowing 80% of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers.[12] In 1999, the Mini was voted the second-most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle.[13][14]

This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge and Cowley plants in England, the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Chile, Italy (Innocenti), Malta, Portugal, South Africa, Uruguay, Venezuela, and Yugoslavia. The Mini Mark I had three major UK updates – the Mark II, the Clubman, and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van, and the Mini Moke, a jeep-like buggy.

The performance versions, the Mini Cooper and Cooper "S", were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965, and 1967. In 1966, the first-placed Mini (along with nine other cars) was disqualified after the finish, under a controversial decision that the car's headlights were against the rules.[15]

Video: Woodworking Projects