My Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they’re after because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this bundle quite easily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Yet, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available across the net. Ted has done his best to direct them in every possible way he can, through simple to understand textual instructions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home My Shed Plans

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. My Shed Plans.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will have the ability to build some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation when you have friends come over to see. They will ask: How did you make it? How long can it take to finish the job? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your job, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners My Shed Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? My Shed Plans.

Begin with an idea in mind of what you want to build and then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a couple. Of course, you can begin with as grand a woodworking plan as you pick. On the other hand, the chances are if you begin with a small woodworking project initially, you will have a better chance of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry area to work and might need a pair of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

My Shed Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. When it’s showing you the way to apply an end to a finished job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking My Shed Plans

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking could be fun. If you don’t have the proper information, education, and ability, you may land up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a few essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a job if you are not interested, as this may land you at a bad location.

2. Think of the main reason behind creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and analyze the time you have, until you begin with a job.

4. Start projects that you can finish. If you’re in the middle of some work, then it’s wise to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners My Shed Plans

If you keep those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects you wish to start with. As a beginner, always pick a project that has quite a basic build up or a very simple structure. Some simple to start projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, My Shed Plans

Tools are the means through which you will win the battle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, constantly check the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking jobs. Based on the sort of job that you would like to complete, pricing can be set. The easy the job, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to fix a budget first on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not have to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and how to get it done. Time also has an important part in the building of woodworking jobs. Woodworking projects require time and therefore it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which can help you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, the thing that you need to construct, the resources you need to possess and the typical time it’s possible to devote daily; then you are all set to go.

Conclusion, My Shed Plans

These strategies and education will create the woodworking projects and plans for beginners fast to complete. Always make sure you have all of the essential tools, materials, area prepared. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can allow you to make a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home My Shed Plans

People if you’re looking for a way to pass time or desire an alternative method to make money they usually turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which job to start out with since you will find projects which may be too difficult for a newbie. But don’t be concerned about that because we are going to provide you guidelines on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your project you need to be aware of whether you’ve got the available resources to work on that project. Try not to invest a good deal of cash on purchasing gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the hand and the hands.

How to Become a Master Woodworker From Your Own Home My Shed Plans

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will provide you time to research unique projects and find out a lot of things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about different projects.
It’s extremely important that you know more about different kinds of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you will need for certain jobs you may want to pursue.
Once you understand the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

My Shed Plans practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs utilizing a variety of tools so that you may get the hang of working with the tools. When starting out you may earn a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners My Shed Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum amount of tools and equipment. A small home workshop can generate a broad variety of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you will perform your woodworking, Depending on the dimensions of your house, you might have the ability to create a dedicated space to your woodworking tasks. This might be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the household. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners My Shed Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. My Shed Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. In the start, set up a bench area where you are able to shop and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard over the bench to hang additional equipment. Put in a woodworking vice at one end of your seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, My Shed Plans

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools in the regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional advertisements. There are an abundance of quality lightly used tools out there that belong to individuals who embarked on that 1 molding project around the home or obtained tools as gifts that they will never utilize. You can usually buy tools for these sellers for under half of the original price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a few extra dollars on a cheap piece of gear. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimum quantity of hand gear yet generated sophisticated and intricate bits. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uncomfortable.

The next piece of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated noise levels. Select powerful hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can end up being the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be used to build an whole house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next job. After choosing the right saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut corners. It’s ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide often. This is one annoyance you don’t need in your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find that your palm sander with a bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood bits. {Start with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps that you can spend. You may get in touch with them for smaller adhesive jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I prefer to utilize soft pine in my vices which will not crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Buy a good quality name brand tape measure with a wide tape typically in the 25-foot selection. Even though in your store you might not be using the tape at these lengths, the larger tape steps provide more rigid tapes that will not flop around and slide off the end of planks. Assessing when you are by yourself will be a great deal easier, and naturally, quality tape steps can last for many years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood.

What is Woodworking? The Benefits of Woodworking My Shed Plans

Woodworking is known as the building or the creation of items from wood. You can produce a lot of different objects from woodworking and these objects are often as large as gazebos or as small as wooden toys. However big or small your private project maybe you will be very likely to accomplish that goal with woodworking. Additionally, woodworking has many personal in addition to emotional benefits! In the following guide, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

A lot of individuals who love to use their hands have turned that love into a career through woodworking. Individuals who build things from wood are generally known keyword as carpenters. Carpenters can operate on a number of woodworking jobs and job types. For example, some carpenters possess their carpentry business and these folks have the luxury to set their work hours. This advantage enables carpenters the opportunity to spend additional time with their families and also have less job stress. Raising children is a really difficult task regardless of what way you approach the endeavor! To get a carpenter who owns their own company, this task may not be as hard since that person is going to have more time to be part of his or her child’s lifetime. By playing a larger role in the life of your child you will be having a greater impact on the type of personality that child develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry can also have health benefits as well.

Starting Your First Woodworking Shop My Shed Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically fit is really important and keyword can help prevent the incidence of various illnesses later on in life. By being physically fit you can decrease chances you will have a heart attack, have seizures, become a diabetic, and reduce the chances of having a number of other illnesses.

My Shed Plans, Do It Yourself Woodworking Saves Money:

I always feel as I paid way too much when I go to home improvement stores and purchase patio furniture, and I am certain that I’m not the only person who has felt this way! A successful small business owner once advised me to always raise the sales price of a product to double what you’ve got it for. This way, you can always decrease the merchandise to 50 percent away and come out without getting any losses. This sounds like it might be the exact same tactic that home improvement shops use in selling their own wooden furniture solutions. Regardless, there is a way which it is possible to get around paying the extra money and that has to do with building it yourself. Luckily, there are some really good woodworking products offering thousands of detailed woodworking keyword strategies for hundreds of different job types. So, you can really build anything you need or see in any home improvement store. Doing something does require a little bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

It Is Well with My Soul

"It Is Well With My Soul" is a hymn penned by hymnist Horatio Spafford and composed by Philip Bliss. First published in Gospel Songs No. 2 by Ira Sankey and Bliss (1876), it is possibly the most influential and enduring in the Bliss repertoire and is often taken as a choral model, appearing in hymnals of a wide variety of Christian fellowships.[1]

This hymn was written after traumatic events in Spafford's life. The first was the death of his son at the age of two and the Great Chicago Fire of 1871, which ruined him financially (he had been a successful lawyer and had invested significantly in property in the area of Chicago that was extensively damaged by the great fire). His business interests were further hit by the economic downturn of 1873, at which time he had planned to travel to Europe with his family on the SS Ville du Havre. In a late change of plan, he sent the family ahead while he was delayed on business concerning zoning problems following the Great Chicago Fire. While crossing the Atlantic Ocean, the ship sank rapidly after a collision with a sea vessel, the Loch Earn, and all four of Spafford's daughters died. His wife Anna survived and sent him the now famous telegram, "Saved alone …". Shortly afterwards, as Spafford traveled to meet his grieving wife, he was inspired to write these words as his ship passed near where his daughters had died.[2] Bliss called his tune Ville du Havre, from the name of the stricken vessel.[3]

The Spaffords later had three more children. On February 11, 1880, their son, Horatio Goertner Spafford, died at the age of four, of scarlet fever. Their Presbyterian church regarded their tragedy as divine punishment. In response, the Spaffords formed their own Messianic sect, dubbed "the Overcomers" by American press. Their daughters were Bertha Hedges Spafford (born March 24, 1878) and Grace Spafford (born January 18, 1881). In 1881, the Spaffords, including baby Bertha and newborn Grace, set sail for Ottoman-Turkish Palestine. The Spaffords settled in Jerusalem and helped found a group called the American Colony. Colony members, later joined by Swedish Christians, engaged in philanthropic work among the people of Jerusalem regardless of their religious affiliation and without proselytizing motives—thereby gaining the trust of the local Muslim, Jewish, and Christian communities. During and immediately after World War I, the American Colony played a critical role in supporting these communities through the great suffering and deprivations by running soup kitchens, hospitals, orphanages and other charitable ventures. The colony later became the subject of Jerusalem by the Nobel prize-winning author, Swedish novelist Selma Lagerlöf.[2]

Video: Woodworking Tools