Neat Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re after because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are just getting started will discover the ideas and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this package quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Neat Wood Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the writers in woodworking publications do a story about how best to increase your woodworking craft. When it’s showing you how to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Neat Wood Projects

If you’re just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking can be fun. If you don’t have the right information, instruction, and ability, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Don’t start a job if you’re not interested, because this might land you in a bad place.

2. Consider the main reason behind creating this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, before you start with a job.

4. Start jobs that you’re able to complete. If you’re in the midst of some work, then it’s wise to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Neat Wood Projects

If you maintain these vital things in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to start with. As a beginner, always select a project that has a very basic build up or a simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Neat Wood Projects

Tools are the means whereby you can win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you buy a hammer, always check the balance between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You might also purchase keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for beginners, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking jobs. Based on the type of project that you want to complete, pricing can be determined. The simple the job, the less price it involves. But at the beginning buying the tools will be somewhat hefty. Because of this, it is much better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Instructions

Directions are among the primary things which each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is very easy to understand the procedure, what to do and how to do it. It keyword is a systematic manual for completing the project. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword that will help you to achieve success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, the item you want to construct, the tools you need to own and the typical time you can give daily; then you’re ready to go.

Conclusion, Neat Wood Projects

All these strategies and instruction is likely to create the woodworking projects and plans for novices fast to complete. Always make sure that you have all the vital tools, materials, area prepared. Read the instructions for building a product handy. Appropriate strategy and planning will help you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Neat Wood Projects

People when trying to find a way to pass time or want an alternate way to make money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be quite careful when choosing which project to begin with because there are jobs which can be too tough for a newbie. But do not worry about that since we are going to provide you tips on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, so before you choose your job you have to know whether you have the available resources to work on such a job. Try not to spend a good deal of money on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no gap between the hand and the hands.

Starting Your First Woodworking Shop Neat Wood Projects

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will give you time to explore unique jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make errors and at some time learning about various jobs.
It is extremely important that you know more about different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood they use can allow you to prepare the wood you will need for specific jobs you might choose to pursue.
Once you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Neat Wood Projects practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of layouts using a variety of tools so that you can get the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will find out how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Neat Wood Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad array of simple projects that can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us discuss where you’ll perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the family. A good compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Neat Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Neat Wood Projects if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in place from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the start, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Neat Wood Projects

The scope of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality lightly used tools out there that belong to individuals who stumbled on that one molding project around the home or received tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for less than half the original price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple added bucks on a cheap piece of gear. The extra cost of travel and time in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this can prove to be the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to build an entire property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your second job. After selecting the proper saw install a quality blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in wood also like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need in your workshop. Purchase an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might find your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Begin with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps which you can afford. You can get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices which will not crush or damage lots of the different forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most frequently used tools. Buy a good excellent name brand tape measure with a broad tape typically from the 25-foot range. Even though in your store you might not be using the tape in these lengths, the larger tape steps offer more rigid tapes which will not flop around and slide off the end of planks. Assessing when you are on your own will be a lot simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Neat Wood Projects

Woodworking is known as the construction or the creation of items out of wood. It is possible to produce a lot of different items from woodworking and these objects can be as big as gazebos or as little as wooden toys. However big or small your personal project maybe you will be very likely to do that goal with woodworking. Additionally, woodworking has many private in addition to psychological benefits! In the following article, I will briefly identify some of the benefits for you.

Woodworking as a Career:

A good deal of people who like to work with their hands have turned that love into a profession through woodworking. Individuals who build things out of wood are usually known keyword as carpenters. Carpenters can work on a number of woodworking jobs and job types. For example, a few carpenters possess their carpentry business and these folks have the luxury to place their work hours. This benefit enables carpenters the opportunity to spend additional time with their own families and have less job strain. Raising kids is a really difficult task regardless of what way you approach the endeavor! To get a carpenter who possesses his or her own business, this task may not be as hard because that person will have more time to be part of his or her child’s life. By playing a larger role in the life span of your child you’ll be having a greater influence on the type of personality that child develops into, which is a massive concern for any loving parent. Besides such advantages, carpentry can also have health benefits as well.

Woodwork Crafts – The Beginners Guide To Woodworking Neat Wood Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Keeping your body physically fit is vital and keyword can help prevent the occurrence of various ailments in the foreseeable future life. By being physically healthy you can decrease chances you will have a heart attack, have seizures, become a diabetic, and reduce the chances of having a range of other disorders.

Neat Wood Projects, Do It Yourself Woodworking Saves Cash:

I always feel as that I paid way too much when I go to home improvement shops and purchase patio furniture, and I am sure that I’m not the only person who has felt like this! A successful small business owner once told me to constantly increase the sales price of a commodity to double what you obtained it for. This way, you can always reduce the merchandise to 50 percent off and still come out without acquiring any losses. This seems like it may be exactly the exact same strategy that home improvement stores use in selling their wooden furniture products. Regardless, there is a way which it is possible to get around paying the additional money and that has to do with building it yourself. Luckily, there are some really good woodworking products offering thousands of detailed woodworking keyword strategies for hundreds of different job types. So, you can really build anything you want or see in any home improvement store. Doing something yourself does take a bit of time but the time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood-plastic composite

In addition to wood fiber and plastic, WPCs can also contain other ligno-cellulosic and/or inorganic filler materials. WPCs are a subset of a larger category of materials called natural fiber plastic composites (NFPCs), which may contain no cellulose-based fiber fillers such as pulp fibers, peanut hulls, bamboo, straw, digestate, etc.

Chemical additives seem practically "invisible" (except mineral fillers and pigments, if added) in the composite structure. They provide for integration of polymer and wood flour (powder) while facilitating optimal processing conditions.[1]

In recent years, people in the flooring industry starts referring to WPC as a type of floor that has a basic structure of top vinyl veneer plus a rigid extruded core (the core can be made without any wood fiber). WPC is now an established product category within LVT.[2] This type of WPC is different than the WPC decking and is not intended for outdoor usage.

Video: Woodworking Tools