Neat Woodworking Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are after because all the thoughts and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People who are only getting started will find the thoughts and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step-by-step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to find any project of their choice in this package quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to guide them in every conceivable way he could, through simple to understand textual directions, clear pictures and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Neat Woodworking Ideas Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking magazines do a story on how to increase your woodworking craft. When it is showing you how you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Neat Woodworking Ideas

If you’re just beginning and very enthusiastic about doing a DIY job for home then, woodworking could be fun. If you don’t have the proper information, instruction, and skill, you may land up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential aspects you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a job if you’re not interested, because this might land you at a bad location.

2. Think of the main reason behind creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, until you start with a project.

4. Start jobs which you’re able to finish. If you are in the middle of a work, then it’s wise to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Neat Woodworking Ideas

If you keep those vital points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to start with. As a beginner, always select a project which has quite a basic construct up or a very simple construction. Some simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so you have a better knowledge of working with woods and their resources. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Neat Woodworking Ideas

Tools would be the ways whereby you will win the struggle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly check the balance between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Choose a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them can help you in advance woodworking. You can also buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking projects. Dependent on the type of project you want to finish, pricing can be set. The simple the project, the less price it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to fix a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not have to purchase any more material aside from the wood ply.

Time and Instructions

Directions are one of the principal things that every beginner should follow. It is like the woodworking Bible. Instructions manual is very easy to understand the procedure, what to do and how to do it. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most indispensable thing keyword which can allow you to achieve success is proper preparation. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, the item you want to build, the tools you require to own and the typical time it’s possible to devote daily; then you are all set to go.

Conclusion, Neat Woodworking Ideas

All these strategies and education will make the woodworking projects and strategies for novices fast to finish. Always make sure you have all of the vital tools, materials, area ready. Keep the instructions for building a product handy. Appropriate strategy and planning can allow you to make a great woodworking project for your property.

|

The Benefits of Woodworking Neat Woodworking Ideas

Folks if you’re trying to find a way to pass time or desire an alternate way to make money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be quite careful when choosing which project to begin with since there are jobs which can be too difficult for a beginner. But do not be concerned about that because we will provide you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your project you need to be aware of if you have the available tools to work on that job. Try not to invest a good deal of cash on buying gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Neat Woodworking Ideas

Woodworking in your home will provide you time to explore unique projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can afford to make errors and at any time learning about various jobs.
It’s extremely important you know more about different types of wood available for making projects. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning which kind of wood that they use can help you prepare the wood you will need for certain jobs you might choose to pursue.
Once you know the fundamentals of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Neat Woodworking Ideas practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Neat Woodworking Ideas

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a wide array of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you will perform your woodworking, based on the size of your house, you might be able to create a dedicated space to your woodworking tasks. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns located in the basement draw dust up into the top levels of the home. Another benefit of detached workshops would be, of course, the sound level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however based on where you reside, a keyword garage workshop may not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Neat Woodworking Ideas

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Neat Woodworking Ideas if you can have a dedicated spot for a marathon all the greater. Floor gear and bench top gear can stay in place from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, set up a bench area where you are able to store and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf below the bench to house your hands power tools and a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Neat Woodworking Ideas

The reach of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools at the local building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used programs out there that belong to people who stumbled on that one molding project around the home or received tools as presents which they won’t ever use. You can usually purchase tools for these sellers for under half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few added bucks on a cheap piece of gear. The excess expense of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand gear yet produced sophisticated and intricate bits. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to elevated sound levels. Select effective hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. With this setup I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this can prove to be the most versatile tool in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be employed to construct an whole house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next job. After selecting the proper saw put in a quality blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut curves. It’s perfect for cutting holes in timber too like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are much more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might find that your palm sander using a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in wood bits. {Begin with a typical number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally takes the novice woodworker a few years to accumulate a comprehensive set of timber clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a set of the maximum clamps that you could spend. You can get in touch with them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without dull handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of the most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not use the tape in these spans, the bigger tape steps provide more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are on your own will be a lot simpler, and naturally, quality tape steps can last for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Neat Woodworking Ideas

Woodworking is referred to as the building or the creation of items from wood. It is possible to create a great deal of different items from woodworking and these items are often as large as gazebos or as small as wooden toys. No matter how large or small your personal project maybe you’ll be quite likely to accomplish that aim with woodworking. In addition, woodworking has lots of private in addition to psychological benefits! In the following article, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A good deal of individuals who love to use their hands have turned that love into a career through woodworking. Individuals who build things out of wood are usually known keyword because carpenters. Carpenters can work on a variety of woodworking projects and job types. For example, a few carpenters own their carpentry company and these individuals have the luxury to place their job hours. This benefit enables carpenters the opportunity to spend more time with their own families and also have less job stress. Raising children is a very tough task regardless of what way you approach the endeavor! To get a carpenter who possesses their own business, this task may not be hard since that person will have more time to become part of her or his child’s lifetime. By playing a bigger role in the life of your child you will be having a greater influence on the sort of personality that kid develops into, which is a massive concern for any loving parent. In addition to such advantages, carpentry may also have health benefits too.

Finding Woodworking Projects and Plans for Beginners Neat Woodworking Ideas

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically healthy is vital and keyword can help prevent the incidence of various illnesses in the foreseeable future life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, become a diabetic, and lower the chances of having a number of different disorders.

Neat Woodworking Ideas, Do It Yourself Woodworking Saves Money:

I feel as that I paid way too far when I visit home improvement shops and buy patio furniture, and I am sure that I’m not the only person that has felt this way! A successful business owner once told me to constantly raise the sales price of a commodity to double everything you got it for. This way, you always have the option to reduce the merchandise to 50 percent away and come out without acquiring any losses. This seems like it might be the same strategy that home improvement shops use in selling their wooden furniture products. Regardless, there’s a way that it is possible to get around paying the extra cash and that has to do with building it yourself. Fortunately, there are several really excellent woodworking products that offer thousands of comprehensive woodworking keyword strategies for hundreds of different project types. Thus, you really can build whatever you want or see in any home improvement store. Doing something does take a little bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Router (woodworking)

A router is a hand tool or power tool that a worker uses to rout (hollow out) an area in relatively hard material like wood or plastic. Routers are mainly used in woodworking, especially cabinetry. Routers are typically handheld or fastened cutting end-up in a router table.

The hand tool type of router is the original form. It is a specialized type of hand plane with a broad base and a narrow blade that projects well beyond its base plate (giving it the nickname old woman's tooth). The power tool form of router with an electric-motor-driven spindle is now the more common form. The hand tool version is now often called a router plane, and for some tasks, still provides a few advantages over the power tool. Some workers consider the electric router one of the most versatile woodworking power tools.[1] CNC wood routers implement the advantages of CNC (Computer Numerical Control).

Related to the router is a smaller, lighter version designed specifically for trimming laminates. It can be used for smaller general routing work. For example, with an appropriate jig it can be used for recessing door hinges and recessing lock faceplates. Even rotary tools can be used as routers when the right bits and accessories (such as a plastic router base) are attached.

Video: Woodworking Tools