New Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the thoughts and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People that are just getting started will find the ideas and jobs in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice within this package quite easily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to direct them in every possible way he could, through easy to comprehend textual instructions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home New Wood Projects

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will have the ability to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. New Wood Projects.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll be able to build some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a topic of conversation when you have friends come over to see. They’ll ask: How did you create it? How long did it take to finish the job? What type of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop New Wood Projects

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? New Wood Projects.

Begin with a concept in mind of what you would like to construct then get a really good woodworking project plan that is geared toward novices. There are several small woodworking projects for novices available for sale from online woodworking retailers. Obviously, you can start out with as grand a woodworking program as you pick. On the other hand, the chances are if you start out with a little woodworking job initially, you will get a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the amount and type of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you may not use all that frequently. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry area to work and might need a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools that beginners will need. You may always increase your toolbox as you gain experience!

New Wood Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking magazines do a story about the best way to improve your woodworking craft. When it’s showing you how to apply an end to a completed project, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners New Wood Projects

If you’re just beginning and very interested in doing a DIY job for home then, woodworking can be fun. If you don’t have the right information, instruction, and ability, you might land up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your hands is a particular sense. Do not start a project if you are not interested, because this might land you in a bad place.

2. Think of the main reason for creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, before you start with a project.

4. Start jobs which you can complete. If you’re in the midst of a work, then it’s better to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners New Wood Projects

If you maintain these vital things in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to begin with. As a beginner, always select a job which has quite a basic build up or a simple construction. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always move into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so you have a better knowledge of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, New Wood Projects

Tools would be the means whereby you will win the struggle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, always assess the balance between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there in the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking jobs. Based on the type of project that you want to finish, pricing can be set. The simple the project, the less cost it involves. But at the very beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not need to buy any more material other than the timber ply.

Time and Directions

Instructions are among the primary things that every newcomer should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the process, what to do and the way to get it done. Time also plays an important part in the construction of woodworking projects. Woodworking projects require time and so it is necessary for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that can allow you to achieve success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, the thing you want to construct, the tools you require to possess and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, New Wood Projects

These tips and instruction is likely to make the woodworking projects and plans for novices quickly to complete. Always make sure that you have all the vital tools, materials, space ready. Keep the instructions for constructing a product handy. Proper strategy and planning will help you to earn a great woodworking job for your property.

|

The Benefits of Woodworking New Wood Projects

People when looking for a way to pass time or desire an alternative method to make money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which job to begin with because there are jobs that can be too difficult for a newbie. But don’t worry about that since we are going to give you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your project you have to be aware of if you have the available resources to work on such a project. Try not to spend a good deal of money on buying gear when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking New Wood Projects

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will give you time to explore unique projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about different jobs.
It’s very important that you know more about different types of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what kind of wood they use can allow you to prepare the wood you’ll need for certain jobs you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good projects to fulfill your wants.

New Wood Projects practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so you can find the hang of working with the tools. When starting out you may earn a number of errors but with time you will find out how to properly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home New Wood Projects

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal amount of tools and equipment. A small home workshop can generate a wide variety of simple projects which can help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you’ll perform your woodworking, based on the size of your house, you might be able to produce a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or on your cellar. In some cases, a detached shed or outbuilding might be perfect to prepare your first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the noise level. You can work without bothering the rest of the household. A good compromise could be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking New Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. New Wood Projects if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top gear can stay in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, establish a seat area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang other gear. Put in a woodworking at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, New Wood Projects

The scope of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools at the regional building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative local advertisements. You will find plenty of quality gently used programs out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents that they won’t ever use. You can usually buy tools for all these sellers for under half the initial cost and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take additional time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The extra expense of travel and time in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when subjected to elevated sound levels. Select powerful hearing protection which you find comfortable and effective. These can include earplugs or complete ear keyword muff protectors. I find that a quality set of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. With this setup I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may end up being the most flexible tool in a startup workshop. In reality, at the hands of a professional, a power hand saw could be employed to build an entire property. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After selecting the proper saw install a quality blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It is perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll discover that your palm sander using just a bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Begin with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a pair of the maximum clamps that you can spend. You may contact them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs without dull handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage lots of the different woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you may not be using the tape in these spans, the bigger tape measures offer more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you are on your own will be a lot easier, and of course, quality tape steps can last for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The cost of adhesive through all of your projects is a little cost consideration. Therefore, it is sensible to go with the best. I also have found over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, New Wood Projects

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Elijah Wood

Wood made his film debut in 1989 with a small part in Back to the Future Part II. He went on to achieve recognition as a child actor with roles in Avalon (1990), Paradise (1991), Radio Flyer, Forever Young (both 1992), The Adventures of Huck Finn and The Good Son (both 1993). As a teenager, he starred in films such as North, The War (both 1994), Flipper (1996), The Ice Storm (1997), Deep Impact and The Faculty (both 1998). Following the success of Lord of the Rings, Wood has appeared in a wide range of films, including Eternal Sunshine of the Spotless Mind (2004), Sin City, Green Street, Everything Is Illuminated (all 2005), Paris, je t'aime, Bobby (both 2006), Celeste and Jesse Forever, Maniac (both 2012), Grand Piano (2013), The Last Witch Hunter (2015), The Trust (2016), and I Don't Feel at Home in This World Anymore (2017).

Wood's voice work includes the role of Mumble in Happy Feet (2006) and its sequel; the title character in 9 (2009); and Spyro in the Legend of Spyro video game trilogy (2006–2008). In addition, he provided the voice of Beck on Disney XD's Tron: Uprising (2012–2013), and Wirt in the Cartoon Network miniseries Over the Garden Wall (2014). From 2011–2014, Wood played the role of Ryan Newman on the FX television series Wilfred, for which he received a Satellite Award nomination for Best Actor. From 2016–17, he starred as Todd Brotzman on the BBC America series Dirk Gently's Holistic Detective Agency.

Wood was born on January 28, 1981, in Cedar Rapids, Iowa, the second of three children.[1] His parents, Debbie (née Krause) and Warren Wood, operated a delicatessen.[2] He was raised Roman Catholic[3][4][5] and has an older brother named Zachariah[6] as well as a younger sister, Hannah.[7] At age seven, Wood began modeling in his hometown and took piano lessons.[8][9] In elementary school, he appeared in The Sound of Music and played the title character in The Wonderful Wizard of Oz. He also served as choir boy in a Marion Creative Council production of See How They Run. In 1989, his parents sold their delicatessen and the family–without his father–moved to Los Angeles for Wood to pursue an acting career. His parents divorced when he was 15.[10]

Video: Woodworking Tools