Out Building Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the thoughts and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. People who are only getting started will find the thoughts and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to locate any job of their choice in this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found across the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it is certainly worth buying!

How to Become a Master Woodworker From Your Own Home Out Building Plans

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and build beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Out Building Plans.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you create it? Where did you get the woodworking programs? Just how long can it take to complete the project? What kind of wood did you use? What type of tools did you use? How on earth did you create such a beautiful item of furniture? As you discuss your job, a sense of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Out Building Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Out Building Plans.

Begin with an idea in your mind of what you would like to construct and then get a really good woodworking project plan that’s geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking merchants. A few woodworking plan suggestions to get you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a couple. Obviously, you can begin with as grand a woodworking program as you pick. On the other hand, the odds are if you begin with a little woodworking project at first, you’ll have a better prospect of keyword finishing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the essential hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you might not utilize all that often. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood glue! Obviously, you’ll need a dry area to work and might require a pair of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools which beginners will need. You can always increase your toolbox as you get experience!

Out Building Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking publications do a story on the best way to increase your woodworking craft. Whether it is showing you the way you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Out Building Plans

If you’re just beginning and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you do not have the proper information, education, and ability, you may land up spending more money and time than you originally intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a few essential aspects you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t start a project if you are not interested, as this may land you at a bad location.

2. Think of the main reason for creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start projects which you can complete. If you’re in the middle of some work, then it is better to not begin any project at all.

Starting Your First Woodworking Shop Out Building Plans

If you maintain those essential things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you want to begin with. As a beginner, always select a project that has quite a basic build up or a very simple construction. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Out Building Plans

Tools would be the ways whereby you will win the battle of woodworking. Many people believe power tools are needs. However, for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking projects. Based on the sort of project that you want to finish, pricing could be determined. The simple the project, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not need to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the principal things which each and every beginner should follow. Instructions manual is very easy to comprehend the procedure, what to do and how to do it. It keyword is a systematic guide for finishing the job. Time also plays an important role in the building of woodworking projects. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper planning. With proper planning and a plan, it’s possible to achieve success quickly. If you understand the purpose of woodworking, the item you want to construct, the tools you need to possess and the average time you can devote daily; then you are ready to go.

Conclusion, Out Building Plans

These tips and education will create the woodworking projects and plans for beginners fast to finish. Always ensure you have all the essential tools, materials, space ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation will allow you to earn a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Out Building Plans

Folks when trying to find a way to pass time or want an alternate method to make money they usually turn into a hobby they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to start out with because there are projects that can be too difficult for a newbie. But do not worry about that since we are going to provide you tips on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you choose your job you have to be aware of if you’ve got the available tools to work on such a project. Try not to invest a lot of money on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Out Building Plans

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will give you time to research different projects and learn so many things. That is why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different jobs.
It is extremely important that you know about different kinds of wood available for making jobs. Expect carpenters use different kinds of wood quality for decorating pieces, learning which kind of wood they use will allow you to prepare the wood you’ll need for specific jobs you might want to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to fulfill your wants.

Out Building Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so you may find the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Out Building Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a broad array of simple projects which will help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll perform your woodworking, based on the dimensions of your house, you may have the ability to create a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Out Building Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to function in. Out Building Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. At the beginning, establish a seat area where you can store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools along with a pegboard above the bench to hang other equipment. Install a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Out Building Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at the local construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. You will find plenty of quality gently used programs out there which belong to individuals who embarked on that one molding job around the house or received tools as gifts which they will never utilize. You can usually buy tools for these sellers for less than half the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple extra bucks on a cheap piece of gear. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. With this set up I’m shielding my eyes and my ears. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the popular brand name, this can prove to be the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an entire property. Eventually, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It is ideal for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want on your workshop. Buy an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents happen. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might discover that your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a pair of the maximum clamps which you could afford. You may get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle turning. The timber beamed surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices which won’t crush or damage many of the various woods that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most frequently used tools. Buy a good quality name brand tape measure with a broad tape typically from the 25-foot range. Even though in your shop you might not be using the tape at these lengths, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the end of boards. Assessing when you are on your own will be a great deal easier, and of course, quality tape measures can last for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The expense of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I also have found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Out Building Plans

The peaceful gratification of woodworking is a wonderful adventure in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

List of tallest buildings and structures in London

Since 2010, the tallest structure in London has been The Shard, which was topped out at 310 metres (1,017 ft), making it the tallest habitable building in Europe at the time.[1] The second tallest is One Canada Square in Canary Wharf, which rises 235 metres (771 ft) and was completed in 1991.[2] The third tallest is Heron Tower (110 Bishopsgate) in the City of London financial district, which was topped out in 2010 and stands at a height of 230 metres (755 ft), including its spire.[3]

The Greater London metropolitan area contains the most skyscrapers in the European Union. As of 2018, there are 26 skyscrapers in London that reach a roof height of at least 150 metres (492 ft),[4] with 18 in the Paris Metropolitan Area, 15 in Frankfurt, eleven in Warsaw and five each in Madrid and Milan.

The history of tall structures in London began with the completion of the 27-metre (89 ft) White Tower, a part of the Tower of London, in 1098.[5][6] The first structure to surpass a height of 100 metres (328 ft) was the Old St Paul's Cathedral. Completed in 1310, it stood at a height of 150 metres (492 ft).[7] St Paul's was the world's tallest structure until 1311, when its height was surpassed by Lincoln Cathedral in Lincoln.[7] It regained the title when the spire of Lincoln Cathedral fell in 1549.[8] Although the spire of the Old St Paul's was destroyed by lightning in 1561, it still stood as the tallest structure in London,[8] while the world's tallest structure became Strasbourg Cathedral in Strasbourg, France.[8] St Paul's was severely damaged by the Great Fire of London in 1666.[7] The title of the tallest structure in London passed to Southwark Cathedral, which stands at a height of 50 metres (164 ft)[9] and no structure in London again rose above 100 metres until 1710, when the current St Paul's Cathedral was completed.[10] At 111 metres (364 ft), the cathedral remained London's tallest building until it was overtaken in 1962 by the BT Tower, which was topped out in 1964 at 177 metres (581 ft) and officially opened in 1965.

Video: Woodworking Tools