Outdoor Wood Project Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are following because most of the ideas and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are actually lots of things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and projects in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice in this bundle quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it will be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools which beginners will need. You can always increase your arsenal as you get experience!

Outdoor Wood Project Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way to improve your woodworking craft. When it is showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Outdoor Wood Project Plans

If you’re a beginner and very interested in doing a DIY job for house then, woodworking could be interesting. If you do not have the right information, instruction, and skill, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Making something new with your hands is a special sense. Do not begin a project if you’re not interested, because this might land you at a bad place.

2. Think of the primary reason for making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, before you start with a project.

4. Start jobs which you’re able to finish. If you are in the middle of some work, then it is wise not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Outdoor Wood Project Plans

If you keep these vital things in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you want to start with. As a newcomer, always pick a job which has quite a basic construct up or a very simple structure. A few simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Outdoor Wood Project Plans

Tools would be the means through which you will win the battle of woodworking. A lot of people believe power tools are needs. However, for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws out there on the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can even buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but having it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Based on the type of job that you want to finish, pricing can be determined. The easy the project, the less price it involves. However, at the very beginning buying the tools will be a little hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not need to purchase any more material other than the wood ply.

Time and Directions

Directions are among the principal things which every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite simple to understand the procedure, what to do and the way to get it done. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword which can help you to achieve success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item that you need to construct, the resources you need in order to possess and the average time it’s possible to give every day; then you’re ready to go.

Conclusion, Outdoor Wood Project Plans

These tips and education is likely to make the woodworking projects and strategies for novices quickly to finish. Always ensure that you have all of the vital tools, materials, space ready. Read the instructions for building a product handy. Appropriate strategy and preparation will help you to make a fantastic woodworking job for your property.

|

The Benefits of Woodworking Outdoor Wood Project Plans

Folks when looking for a way to pass time or want an alternate method to generate money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which job to start out with since there are jobs that may be too difficult for a newbie. But don’t be concerned about that since we will provide you guidelines on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you need to know if you’ve got the available resources to work on that project. Try not to spend a lot of money on purchasing gear when starting out, purchase more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Outdoor Wood Project Plans

Woodworking in your home will provide you time to research unique projects and learn a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It’s very important you know more about the different kinds of wood available for creating projects. Expect carpenters use different types of wood quality for decorating bits, learning what kind of wood they use can allow you to prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your wants.

Outdoor Wood Project Plans practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts using various tools so you may get the hang of using the tools. When starting out you can make a range of errors but with time you will find out how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Outdoor Wood Project Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimal number of gear and equipment. A small home workshop may generate a broad array of simple projects which can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you will perform your woodworking, based on the size of your home, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air returns located in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This might help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Outdoor Wood Project Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Outdoor Wood Project Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the beginning, set up a bench area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the seat to hang other gear. Install a woodworking vice at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Outdoor Wood Project Plans

The scope of your startup equipment will be mostly based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools at your local construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. You will find an abundance of quality gently used programs out there that belong to people who stumbled on that one molding job around the house or received tools as gifts which they will never utilize. You can usually purchase tools for all these sellers for less than half of the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a couple added bucks on a inexpensive piece of gear. The excess cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can prove to be the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be used to construct an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your next project. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It’s perfect for cutting holes in timber also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Buy an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover that your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a few years to accumulate a detailed set of timber clamps. Begin with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Get a pair of the longest clamps which you can spend. You can contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the jaws with no dull handle rotation. The timber clamping surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices that won’t crush or damage many of the different woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among your most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your store you might not use the tape at these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you are on your own will be a lot easier, and naturally, quality tape measures can endure for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap house brands marketed as carpenter’s glue. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Outdoor Wood Project Plans

The peaceful gratification of woodworking is a wonderful adventure in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Bethel Woods Center for the Arts

The Bethel Woods Center for the Arts is an amphitheatre, performing arts center and museum located at the site of the 1969 Woodstock Music & Art Fair in Bethel, New York. Located approximately 90 miles (140 km) from New York City, the 800-acre (3.2 km2) site includes a 15,000-seat outdoor concert venue, a 1,000-set outdoor terrace stage, an intimate 440-seat indoor hall, and the Museum at Bethel Woods. Concerts run June through September and feature many types of music genres.

In 1996, Alan Gerry, a longtime Liberty, New York resident and founder of Cablevision Industries, created a not-for-profit organization named the Gerry Foundation with the intent of revitalizing the economy of Sullivan County, which had faced severe hardships following the collapse of the Catskill's Borscht Belt tourism industry. That same year, the Foundation purchased the original 37-acre (0.15 km2) Woodstock festival field and hundreds of acres surrounding it, with eventual plans for an arts center.[1]

Planning for the arts center began in 2002, and construction on the $150 million project started two years later. The amphitheatre opened on July 4, 2006 with a performance by the New York Philharmonic.[2] On August 13, 2006, Crosby, Stills, Nash & Young performed before 16,000 fans at the new center, 37 years after their historic performance at Woodstock.

Video: Woodworking Projects