Outdoor Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they’re after because most of the ideas and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are actually lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are just getting started will find the thoughts and projects in Ted’s package quite simple. No doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice within this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available across the net. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find within. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to purchase the crucial hand and power tools which novices will need. You may always increase your arsenal as you get experience!

Outdoor Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. Whether it is showing you the way to apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Outdoor Wood Projects

If you are a beginner and very enthusiastic about doing a DIY job for home then, woodworking can be interesting. If you don’t have the proper information, education, and skill, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not start a project if you’re not interested, because this might land you at a terrible place.

2. Consider the main reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time you have, until you start with a project.

4. Start jobs that you’re able to complete. If you’re in the middle of a work, then it’s wise not to begin any project in any way.

How to Become a Master Woodworker From Your Own Home Outdoor Wood Projects

If you keep those vital points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects you wish to start with. As a newcomer, always select a project which has a very basic build up or a very simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Outdoor Wood Projects

Tools would be the ways whereby you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking jobs. Dependent on the sort of job you would like to complete, pricing could be determined. The easy the project, the less cost it involves. But at the very beginning buying the tools will probably be somewhat hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the undertaking. Buying the basic tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things that every beginner should follow. It’s like the woodworking Bible. Instructions manual is very simple to understand the process, what to do and the way to get it done. It keyword is a systematic manual for completing the job. Time also plays an important part in the construction of woodworking projects. Woodworking projects require time and therefore it’s crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to reach success is proper preparation. With appropriate planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, then the item you want to build, the resources you need to possess and the typical time it’s possible to give daily; then you’re all set to go.

Conclusion, Outdoor Wood Projects

All these tips and instruction is likely to create the woodworking projects and plans for beginners quickly to complete. Always ensure that you have all the essential tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and planning will help you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Outdoor Wood Projects

People if you’re trying to find a way to pass time or want an alternate way to generate money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which job to begin with since you will find jobs that may be too tough for a beginner. But do not be concerned about that because we will provide you tips on the ideal means to start woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your project you have to be aware of whether you have the available tools to work on such a project. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand as well as the hands.

The Benefits of Woodworking Outdoor Wood Projects

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will give you time to research different jobs and learn a lot of things. That’s why it’s very important to invest less money when starting out so you can afford to make mistakes and at some time learning about various projects.
It’s very important that you know about the different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning which kind of wood that they use will allow you to prepare the wood you will need for certain jobs you might want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to fulfill your wants.

Outdoor Wood Projects practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs using a variety of tools so you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Outdoor Wood Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a broad variety of simple projects that will help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you’ll perform your woodworking, Depending on the size of your house, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first store. A heated store detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the noise level. You can work without disturbing the rest of the family. A fantastic compromise could be the garage of your property.

This might help minimize the problems of dust and sound, however depending on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Outdoor Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Outdoor Wood Projects if you can have a dedicated spot for a marathon all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the start, set up a seat area where you can store and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to house your hand power tools and a pegboard above the seat to hang other gear. Put in a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Outdoor Wood Projects

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in your regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional ads. You will find an abundance of quality lightly used programs out there which belong to people who stumbled on that one molding job around the home or received tools as gifts which they will never use. You can usually buy tools for all these sellers for under half of the initial cost and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh out the benefits of traveling around town to save a few added dollars on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the popular brand name, this may end up being the most flexible instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be used to construct an entire house. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second job. After choosing the proper saw install an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid . All these possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut corners. It is perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might find your palm sander with just a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Get a pair of the longest clamps that you could spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle turning. The timber beamed surfaces in your vice will occasionally require replacement. I prefer to use soft walnut in my vices that will not crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most frequently used tools. Buy a good quality name brand tape measure with a wide tape usually from the 25-foot range. Even though in your store you might not be using the tape at these spans, the bigger tape steps offer more rigid tapes which will not flop around and slide off the ending of boards. Measuring when you are by yourself will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. The expense of adhesive through all your projects is a minor cost consideration. Therefore, it is sensible to go with the best. I have also found over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Outdoor Wood Projects

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Outdoor cinema

Viewers usually sit on camping chairs or blankets. Some Hollywood world premieres were screened in outdoor cinemas – sometimes with the stars in attendance. Most screenings are free with some raising money for charities.

As projector prices have decreased, guerrilla style outdoor cinemas have become more common. These are run on a very small budget by groups of amateurs. It is common for the events to be organised online, participants then meet in parks, empty parking lots or other public places. Guerrilla outdoor cinemas are very basic, often needing to be completely set up and dismantled in a single night. Sheets, portable screens or existing walls are used as a screen for the projected image. Power is obtained from generators or car batteries.

Large and well-known outdoor cinemas include the Outdoor Cinema Food Fest in California, Oshkosh’s Fly-In theater,[3] Screen on the Green (Atlanta) or Sunset Cinema[4] in Australia. More and more often prestigious film festivals add outdoor movies to their regular screenings. Some of the most important outdoor movie events were the world premiere of Shark Tale on St. Mark’s Square at Venice Film Festival (2004)[5] and outdoor at Dubai International Film Festival (2011).[6]

Video: Woodworking Tools