Outdoor Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because all the thoughts and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice within this package quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every possible way he can, through easy to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Outdoor Woodworking Projects

Woodworking is 1 hobby that can also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Outdoor Woodworking Projects.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll be able to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation when you have friends come over to visit. They will ask: How can you make it? Just how long did it take to finish the project? What kind of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you speak about your work, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Outdoor Woodworking Projects

If you are thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Outdoor Woodworking Projects.

Start with a concept in your mind of what you would like to build then get a really good woodworking project plan that’s geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking retailers. Of course, you can begin with as expansive a woodworking plan as you pick. However, the odds are if you begin using a small woodworking job at first, you’ll have a better chance of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to complete the project. Note: A word of caution about buying woodworking tools. Just buy what you need to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not utilize all that frequently. If you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might need a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Outdoor Woodworking Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. However, if you’re not certain about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. Whether it is showing you the way to apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Outdoor Woodworking Projects

If you’re just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you don’t have the right information, instruction, and ability, you may wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Do not start a job if you’re not interested, because this might land you at a terrible place.

2. Think of the primary reason for making this woodworking project. Choose the uses of the thing you are making.

3. Consider your skills and examine the time you have, before you begin with a job.

4. Start projects that you’re able to finish. If you are in the middle of some work, then it is wise to not begin any project in any way.

Starting Your First Woodworking Shop Outdoor Woodworking Projects

If you maintain these essential points in mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to start with. As a newcomer, always pick a project that has quite a basic build up or a very simple construction. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should always keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Outdoor Woodworking Projects

Tools are the means through which you can win the battle of woodworking. Many people believe power tools are needs. However, for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking projects. Based on the sort of project that you would like to finish, pricing could be set. The simple the project, the less price it involves. However, at the beginning buying the tools will probably be a little hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will ensure that you do not have to purchase any more material other than the wood ply.

Time and Instructions

Directions are among the primary things which each and every beginner should follow. Instructions guide is very easy to understand the procedure, what to do and how to do it. Time also plays an important role in the construction of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to reach success is proper planning. With proper planning and a strategy, it is possible to achieve success quickly. If you understand the objective of woodworking, the thing that you want to construct, the tools you need in order to possess and the average time you can devote daily; then you are ready to go.

Conclusion, Outdoor Woodworking Projects

All these strategies and instruction will make the woodworking projects and plans for beginners fast to complete. Always ensure that you have all the essential tools, materials, space ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation can allow you to make a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Outdoor Woodworking Projects

People if you’re trying to find a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be very cautious when choosing which project to begin with because there are jobs which may be too tough for a beginner. But do not be concerned about that because we are going to give you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, so before you pick your project you need to be aware of whether you have the available tools to work on such a job. Try not to spend a good deal of money on purchasing gear when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Outdoor Woodworking Projects

Woodworking at home will provide you time to research different jobs and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at some time learning about various projects.
It is very important you know about the different types of wood available for making projects. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning what type of wood they use will allow you to prepare the wood you will need for certain jobs you might want to pursue.
Once you know the fundamentals of wood choice and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Outdoor Woodworking Projects practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts using various tools so that you can get the hang of using the tools. When starting out you may make a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Outdoor Woodworking Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A small home workshop may produce a wide variety of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll do your woodworking, based on the size of your home, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to set up your very first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the noise level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This can help decrease the problems of dust and noise, however depending on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Outdoor Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. Outdoor Woodworking Projects if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. At the start, establish a seat area where you can store and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to home your hand power tools and a pegboard over the seat to hang other gear. Install a woodworking at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Outdoor Woodworking Projects

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other local advertisements. There are plenty of quality gently used tools out there that belong to people who embarked on that 1 molding job around the home or received tools as presents which they won’t ever use. You can usually purchase tools for these sellers for less than half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh out the advantages of traveling across town to save a few added dollars on a inexpensive piece of equipment. The extra expense of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can prove to be the most versatile instrument in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an whole property. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut corners. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover that your palm sander with just a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the maximum clamps that you could spend. You can get in touch with them for smaller adhesive jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the user to rapidly open and close the limbs with no dull handle turning. The wood beamed surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices which won’t crush or damage lots of the various woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your shop you might not use the tape at these spans, the bigger tape measures provide more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you’re on your own will be a lot simpler, and naturally, quality tape measures can endure for many decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes on the way.

Adhesives: Not many glues are created equal. Avoid cheap home brands marketed as carpenter’s glue. The expense of adhesive through all your jobs is a little cost consideration. Therefore, it is sensible to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Outdoor Woodworking Projects

The peaceful gratification of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the profitable skills of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects