Pallet Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they are following because all the ideas and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. Those that are only getting started will find the ideas and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any job of their choice in this package quite readily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who purchase it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his very best to guide them in every conceivable way he could, through easy to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Pallet Furniture Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. However, if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking magazines do a story about the best way best to increase your woodworking craft. When it is showing you the way you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Pallet Furniture Plans

If you’re a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be interesting. If you don’t have the right information, instruction, and ability, you may land up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Making something new with your own hands is a particular feeling. Do not start a job if you’re not interested, because this might land you at a bad location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a project.

4. Start jobs which you’re able to finish. If you are in the middle of a work, then it is wise not to begin any project at all.

How to Become a Master Woodworker From Your Own Home Pallet Furniture Plans

If you maintain those essential things in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to start with. As a beginner, always pick a project which has a very basic construct up or a simple construction. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Pallet Furniture Plans

Tools are the ways through which you can win the battle of woodworking. A lot of men and women think that power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you buy a hammer, always assess the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Dependent on the sort of job you would like to complete, pricing could be set. The simple the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it is better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t have to purchase any more material aside from the wood ply.

Time and Directions

Instructions are one of the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite simple to understand the process, what to do and the way to get it done. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword which will allow you to reach success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, the item that you need to construct, the resources you require to own and the average time you can give every day; then you are ready to go.

Conclusion, Pallet Furniture Plans

These strategies and instruction is likely to create the woodworking projects and plans for novices fast to complete. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Appropriate strategy and planning can help you to earn a fantastic woodworking job for your home.

|

The Benefits of Woodworking Pallet Furniture Plans

People when looking for a way to pass time or want an alternate method to generate money they usually turn into a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of projects one can think of. When starting out you have to be very cautious when choosing which job to start out with since you will find projects which may be too difficult for a beginner. But don’t be concerned about that because we will provide you guidelines on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you choose your project you have to be aware of whether you’ve got the available resources to work on that job. Try not to invest a good deal of cash on buying gear when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Pallet Furniture Plans

Woodworking at home will provide you time to research unique jobs and learn so many things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at any time learning about different jobs.
It is very important you know more about the different types of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood that they use will allow you to prepare the wood you will need for specific jobs you may choose to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to fulfill your needs.

Pallet Furniture Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out a lot of designs utilizing a variety of tools so that you can find the hang of using the tools. When starting out you may earn a range of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Pallet Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal number of gear and equipment. A small home workshop may generate a wide array of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you’ll do your woodworking, Depending on the size of your house, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to set up your first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise might be the garage of your property.

This can help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Pallet Furniture Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Pallet Furniture Plans if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and gear. In the beginning, set up a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the bench to hang additional gear. Put in a woodworking at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Pallet Furniture Plans

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools in the regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. You will find plenty of quality gently used tools out there which belong to individuals who stumbled on that one molding project around the house or received tools as gifts that they will never use. You can usually buy tools for these sellers for under half of the original cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few extra dollars on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to elevated sound levels. Last, put on a cap to keep the dust from your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the popular name, this may end up being the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an whole property. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut corners. It’s ideal for cutting holes in timber also like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might find that your palm sander using a little bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to collect a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can spend. You may contact them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no dull handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft pine in my vices which will not crush or damage many of the different woods that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot selection. Although in your store you might not use the tape at these lengths, the bigger tape steps provide more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape measures can endure for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The expense of glue through all your projects is a little cost consideration. For that reason, it is sensible to decide on the best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Pallet Furniture Plans

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Pallet crafts

Issue 14 of ReadyMade Magazine issued out a MacGyver challenge to find some way to reuse shipping pallets. In the following two issues of the magazine, plans and pictures for winning submissions were shown. Winning submissions included:[citation needed]

Video: Woodworking Tools