Patterns For Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are after because most of the thoughts and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are only getting started will find the ideas and projects in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s easy step by step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice within this package quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every conceivable way he could, through simple to understand textual instructions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always add to your arsenal as you get experience!

Patterns For Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the writers in woodworking publications do a story on how to improve your woodworking craft. Whether it’s showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Patterns For Woodworking Projects

If you’re a beginner and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you don’t have the right information, education, and ability, you might land up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not start a job if you are not interested, as this may land you at a bad place.

2. Consider the primary reason behind creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start jobs which you can complete. If you are in the middle of some work, then it’s better to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Patterns For Woodworking Projects

If you keep these vital points in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you want to start with. As a beginner, always select a project that has a very basic construct up or a very simple construction. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Patterns For Woodworking Projects

Tools would be the ways through which you can win the struggle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You might also purchase keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for beginners, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking jobs. Based on the type of job you want to finish, pricing could be determined. The simple the job, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it is much better to resolve a budget first on the resources, then keyword on the project. Purchasing the basic tools will ensure that you don’t need to purchase any more material other than the timber ply.

Time and Directions

Instructions are one of the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the process, what to do and the way to do it. Time also has a significant part in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it’s possible to achieve success immediately. If you know the purpose of woodworking, then the thing that you want to construct, the resources you require in order to possess and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Patterns For Woodworking Projects

All these strategies and education is likely to create the woodworking projects and strategies for beginners fast to complete. Always make sure that you have all the essential tools, materials, space prepared. Keep the instructions for building an item handy. Appropriate strategy and planning will allow you to make a great woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Patterns For Woodworking Projects

People if you’re looking for a way to pass time or desire an alternative way to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be quite careful when choosing which job to start out with because there are jobs that may be too tough for a newbie. But don’t worry about that since we will provide you guidelines on the right means to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, so before you pick your project you have to be aware of if you have the available tools to work on such a project. Try not to invest a lot of money on buying gear when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the hands.

Starting Your First Woodworking Shop Patterns For Woodworking Projects

Woodworking in your home will provide you time to research different jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so that you can afford to make mistakes and at some time learning about different jobs.
It’s extremely important you know about the different types of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you know the basics of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to fulfill your wants.

Patterns For Woodworking Projects practice makes perfect so be sure you practice your work daily if possible. Try out a lot of layouts utilizing a variety of tools so that you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Patterns For Woodworking Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad array of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will do your woodworking, based on the dimensions of your home, you may be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your first shop. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and sound, however based on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Patterns For Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Patterns For Woodworking Projects if you’re able to have a dedicated spot for a workshop all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation is not impossible, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and equipment. At the start, establish a seat area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Patterns For Woodworking Projects

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used tools out there that belong to people who stumbled on that 1 molding project around the house or obtained tools as gifts which they will never utilize. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a few added bucks on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may prove to be the most versatile tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It is ideal for cutting holes in timber also like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely update to a floor model disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might find that your palm sander with a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a pair of the maximum clamps that you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the consumer to rapidly open and close the jaws without dull handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the different woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good excellent name brand tape measure with a broad tape usually in the 25-foot range. Even though in your store you might not use the tape at these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are on your own will be a lot easier, and naturally, quality tape measures can last for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber.

What is Woodworking? The Benefits of Woodworking Patterns For Woodworking Projects

Woodworking is referred to as the construction or the creation of objects from wood. You can produce a lot of unique items from woodworking and these objects can be as large as gazebos or as small as wooden toys. No matter how large or small your personal project maybe you will be quite likely to do that goal with woodworking. In addition, woodworking has lots of personal in addition to emotional benefits! In the following article, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

A lot of individuals who love to use their hands have turned that love into a career through woodworking. People who build things out of wood are usually known keyword as carpenters. Carpenters can operate on a variety of woodworking jobs and job types. For example, some carpenters own their carpentry company and these individuals have the luxury to place their work hours. This benefit enables carpenters the chance to spend more time with their families and also have less job stress. Raising children is a very difficult task no matter what way you approach the task! For a carpenter who owns their own business, this job may not be as hard since that individual will have more time to be a part of her or his child’s lifetime. By playing a bigger part in the life span of your child you will be having a greater impact on the type of personality that kid develops into, which is a huge concern for any loving parent. In addition to such benefits, carpentry can also have health benefits as well.

Woodwork Crafts – The Beginners Guide To Woodworking Patterns For Woodworking Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a lot. This causes more physical activity, which leads to better physical health. Keeping your body physically fit is vital and keyword can help prevent the occurrence of various illnesses in the foreseeable future life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, become a diabetic, and reduce the odds of having a range of different illnesses.

Patterns For Woodworking Projects, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I visit home improvement shops and purchase patio furniture, and I am sure that I’m not the only person that has felt like this! A successful small business owner once told me to constantly increase the sales price of a product to double everything you got it for. In this manner, you can always decrease the merchandise to 50 percent off and come out without acquiring any losses. This seems like it may be the exact same tactic that home improvement stores use in selling their wooden furniture products. Regardless, there is a way which you can get around paying the extra money and that has to do with building it yourself. Fortunately, there are some really excellent woodworking products offering thousands of detailed woodworking keyword strategies for countless different job types. So, you really can build whatever you need or see in almost any home improvement store. Doing something does require a bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects