Plans For Cabinets | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because all the thoughts and projects Ted’s source are simple to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those who are only getting started will discover the thoughts and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to find any job of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found throughout the net. Ted has done his very best to guide them in every possible way he could, through easy to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Plans For Cabinets

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Plans For Cabinets.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to build some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It will be a subject of conversation whenever you have friends come over to see. They’ll ask: How did you make it? Where did you get the woodworking programs? How long can it take to finish the project? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Plans For Cabinets

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Plans For Cabinets.

Begin with an idea in mind of what you want to build then get a really good woodworking project plan that is geared toward novices. There are numerous small woodworking projects for beginners available for purchase from online woodworking merchants. A couple of woodworking plan suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to mention a couple. Obviously, you can begin with as grand a woodworking program as you choose. However, the odds are if you start out with a small woodworking project at first, you will get a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the essential hand tools and power tools to complete the project. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry place to work and might require a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

Plans For Cabinets Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the authors in woodworking publications do a story on how to increase your woodworking craft. When it is showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Plans For Cabinets

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking can be interesting. If you don’t have the proper information, education, and skill, you may land up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a couple of essential factors you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t start a job if you’re not interested, as this may land you in a bad place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, until you begin with a job.

4. Start jobs that you can finish. If you are in the midst of some work, then it is better not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Plans For Cabinets

If you keep those essential things in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you wish to begin with. As a beginner, always select a project that has quite a basic build up or a simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Plans For Cabinets

Tools would be the ways through which you can win the battle of woodworking. Many men and women believe power tools are needs. However, for beginners, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you purchase a hammer, always check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Dependent on the type of job you want to finish, pricing can be set. The easy the job, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Therefore, it’s better to resolve a budget on the tools, then keyword on the undertaking. Buying the basic tools will make certain you don’t need to purchase any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and the way to get it done. Time also plays a significant role in the construction of woodworking projects. Woodworking projects require time and so it’s necessary for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that will help you to achieve success is proper planning. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the objective of woodworking, then the item you want to build, the tools you need to own and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Plans For Cabinets

These strategies and education is likely to create the woodworking projects and strategies for novices fast to complete. Always ensure you have all the vital tools, materials, area ready. Read the instructions for building a product handy. Proper strategy and planning can allow you to make a great woodworking project for your home.

|

The Benefits of Woodworking Plans For Cabinets

People if you’re looking for a way to pass time or desire an alternative way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be very cautious when choosing which job to begin with because you will find projects that may be too difficult for a newbie. But do not be concerned about that because we will provide you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you pick your project you have to be aware of whether you’ve got the available resources to work on that job. Try not to invest a lot of money on buying equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Plans For Cabinets

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking at home will provide you time to explore unique projects and learn a lot of things. That is why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different jobs.
It’s extremely important that you know more about the different kinds of wood available for making projects. Expect carpenters use different types of wood quality for decorating pieces, learning which type of wood they use can help you prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to fulfill your wants.

Plans For Cabinets practice makes perfect so make sure you practice your work every day if possible. Try out lots of designs utilizing various tools so you can find the hang of using the tools. When starting out you can earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Plans For Cabinets

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a broad array of simple projects which can allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you’ll do your woodworking, Depending on the size of your house, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to set up your first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the home. Another advantage of detached workshops is, of course, the noise level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your property.

This can help minimize the problems of dust and noise, however depending on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Plans For Cabinets

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Plans For Cabinets if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can remain in place from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the beginning, set up a seat area where you can store and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard over the bench to hang additional gear. Install a woodworking at one end of the bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Plans For Cabinets

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools at your regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. You will find an abundance of quality lightly used programs out there that belong to individuals who stumbled on that one molding job around the house or obtained tools as gifts that they will never use. You can usually buy tools for all these sellers for under half the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and possibly travel expenses. Weigh out the advantages of traveling around town to save a few extra dollars on a cheap piece of equipment. The extra expense of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire faster when subjected to high sound levels. Select effective hearing protection which you find comfortable and effective. These can include earplugs or complete ear keyword muff protectors. I find that a excellent pair of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the popular name, this can prove to be the most versatile tool in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an entire house. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next job. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut curves. It is perfect for cutting holes in timber too like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander with just a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood bits. {Begin with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you can spend. You can contact them for smaller adhesive jobs and expand them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces on your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which won’t crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Although in your shop you may not be using the tape at these lengths, the bigger tape steps offer more rigid tapes that won’t flop around and slide off the ending of boards. Measuring when you are on your own will be a lot easier, and of course, quality tape steps can endure for many years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The expense of glue through all your jobs is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have found over the years that I receive the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Plans For Cabinets

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

House plan

A house plan is a set of construction or working drawings (sometimes still called blueprints) that define all the construction specifications of a residential house such as dimensions, materials, layouts, installation methods and techniques.

An open floorplan is one which values wide, unenclosed spaces. They are made possible by curtain wall technology, engineered lumber and truss systems, and thoughtful structural design which allow for larger clear-spans than formerly possible in residential construction.

Video: Woodworking Tools