Plans For Furniture Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re following because most of the thoughts and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those who are just getting started will find the ideas and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice in this bundle quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every conceivable way he can, through simple to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Plans For Furniture Projects

Woodworking is 1 hobby that could also be a rewarding career if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all types of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Plans For Furniture Projects.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you’ll have the ability to build some really nice furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They’ll ask: How did you make it? How long did it take to complete the project? What kind of tools did you use? Just how on earth did you make such a gorgeous piece of furniture? As you discuss your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Plans For Furniture Projects

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Plans For Furniture Projects.

Start with a concept in your mind of what you would like to build then get a excellent woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a couple. Of course, you can start out with as expansive a woodworking program as you pick. However, the chances are if you begin using a little woodworking project initially, you’ll get a better chance of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank buying a great deal of tools you may not use all that often. If you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Of course, you will need a dry place to work and might need a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools which beginners will need. You may always increase your toolbox as you get experience!

Plans For Furniture Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking magazines do a story on how best to increase your woodworking craft. When it is showing you how to apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Plans For Furniture Projects

If you are just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you do not have the proper information, education, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you in a terrible location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time you have, until you begin with a project.

4. Start jobs that you can complete. If you’re in the midst of some work, then it’s wise to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Plans For Furniture Projects

If you keep these essential points in mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a very simple structure. Some simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Plans For Furniture Projects

Tools are the means whereby you can win the struggle of woodworking. Many men and women think that power tools are requires. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you ahead of time woodworking. You can even buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking projects. Based on the sort of job that you want to complete, pricing could be determined. The simple the project, the less price it involves. However, at the beginning purchasing the tools will be a little hefty. Therefore, it is better to resolve a budget on the tools, then keyword on the project. Purchasing the basic tools will make certain you do not need to purchase any more material other than the timber ply.

Time and Directions

Directions are among the primary things which every newcomer should follow. Instructions manual is very easy to comprehend the process, what to do and how to get it done. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and so it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword which can help you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the thing you want to build, the tools you require to possess and the average time you can devote every day; then you’re all set to go.

Conclusion, Plans For Furniture Projects

These tips and instruction is likely to make the woodworking projects and strategies for novices fast to finish. Always ensure you have all of the vital tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Plans For Furniture Projects

Folks if you’re looking for a way to pass time or desire an alternative method to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which job to start out with because you will find projects that can be too tough for a beginner. But don’t be concerned about that since we will give you tips on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, so before you pick your job you need to be aware of whether you’ve got the available resources to work on that project. Try not to invest a good deal of cash on purchasing equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the hand as well as the normal hands.

The Benefits of Woodworking Plans For Furniture Projects

Woodworking in your home will provide you time to research unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s extremely important you know about the different kinds of wood available for creating jobs. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood that they use can help you prepare the wood you will need for certain projects you might want to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good projects to fulfill your wants.

Plans For Furniture Projects practice makes perfect so be sure you practice your work daily if possible. Try out a lot of layouts utilizing a variety of tools so you may find the hang of using the tools. When starting out you can earn a range of errors but with time you will find out how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Plans For Furniture Projects

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A small home workshop can produce a broad variety of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll perform your woodworking, based on the size of your home, you might be able to create a dedicated space into your woodworking activities. This may be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns located in the basement draw dust up into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the household. A fantastic compromise could be the garage of your property.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Plans For Furniture Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Plans For Furniture Projects if you’re able to have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the seat to hang other equipment. Install a woodworking at one end of the bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Plans For Furniture Projects

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used tools out there which belong to individuals who stumbled on that 1 molding project around the house or received tools as presents which they won’t ever use. You can usually purchase tools for these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a few added bucks on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to elevated noise levels. These can include earplugs or complete ear keyword muff protectors. I find that a quality set of ear muff guards is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this can prove to be the most flexible tool in a startup workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an entire property. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next job. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut curves. It is ideal for cutting holes in wood too like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill piece to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most frequent, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll discover your palm sander using a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Begin with a typical number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a set of the longest clamps which you could spend. You may contact them for smaller adhesive jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the limbs with no tedious handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices which will not crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually from the 25-foot selection. Although in your shop you may not be using the tape at these lengths, the larger tape steps offer more rigid tapes that will not flop around and slip off the end of boards. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from cheap home brands sold as carpenter’s glue. The cost of glue through all your jobs is a minor cost consideration. For that reason, it makes sense to go with the very best. I also have found over the years that I get the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Plans For Furniture Projects

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most basic tools and equipment, everyone can learn the profitable skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Florence Knoll

Florence Marguerite Knoll Bassett (née Schust; May 24, 1917 – January 25, 2019)[1] was an American architect and furniture designer who studied under Mies van der Rohe and Eliel Saarinen. She was born Florence Schust in Saginaw, Michigan, and was known in familiar circles as "Shu".[2]

She created the modern look and feel of America’s postwar corporate office with sleek furniture, artistic textiles and an uncluttered, free-flowing workplace environment. The company she formed with her husband, Knoll Associates, grew to become the leading innovator of modern interiors and furnishings in the 1950s and 1960s, transforming the CBS, Seagram and Look magazine headquarters in Manhattan. Her “total design” favored open work spaces over private offices, and furniture grouped for informal discussions. It integrated lighting, vibrant colors, acoustic fabrics, chairs molded like tulip petals, sofas and desks with chrome legs, collegially oval meeting tables, and multilevel interiors, more architectural than decorative, with open-riser staircases that seemed to float in the air.[3]

Florence Marguerite Schust was born in Saginaw, Michigan, to Frederick Emanuel (1881–1923) and Mina Matilda (Haist) Schust (1884–1931). Frederick Schust was born about 1882 in either Switzerland or Germany, was a native German speaker, and the 1920 United States Federal Census describes him as the superintendent of a commercial bakery. Mina was born about 1887 in Michigan, and her parents had been born in Canada.[4] Frederick died relatively young, some time before the 1930 United States Federal Census.[5]

Video: Woodworking Tools