Playhouse Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are after because most of the ideas and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are only getting started will discover the ideas and jobs in Ted’s package quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the net. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual directions, clear images and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and much more woodworking power tools here, but the idea is to purchase the essential hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Playhouse Furniture Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way best to improve your woodworking craft. When it is showing you the way you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Playhouse Furniture Plans

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be interesting. If you do not have the right information, education, and ability, you might wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a couple of essential aspects that you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your hands is a special sense. Don’t start a job if you are not interested, as this may land you in a bad location.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time you have, before you start with a project.

4. Start jobs which you can complete. If you are in the middle of some work, then it is wise to not start any project at all.

Starting Your First Woodworking Shop Playhouse Furniture Plans

If you maintain these essential things in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to begin with. As a newcomer, always pick a project which has quite a basic construct up or a simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so you have a better comprehension of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Playhouse Furniture Plans

Tools would be the ways through which you will win the battle of woodworking. Many people believe power tools are needs. However, for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking projects. Based on the type of job you would like to finish, pricing could be determined. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to fix a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to buy any more material other than the timber ply.

Time and Directions

Directions are among the principal things that each and every newcomer should follow. Instructions guide is very simple to understand the process, what to do and the way to get it done. Time also has an important part in the building of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you know the objective of woodworking, the thing that you want to build, the tools you require to own and the average time you can devote every day; then you are ready to go.

Conclusion, Playhouse Furniture Plans

These tips and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and planning will help you to earn a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Playhouse Furniture Plans

Folks if you’re looking for a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can think of. When starting out you need to be quite cautious when choosing which project to start out with because you will find jobs which may be too difficult for a beginner. But don’t worry about that since we are going to provide you tips on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you choose your project you need to be aware of whether you’ve got the available tools to work on that project. Try not to invest a lot of money on buying equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Playhouse Furniture Plans

Woodworking at home will provide you time to explore unique projects and learn so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about different projects.
It is very important that you know about the different kinds of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating bits, learning what kind of wood they use can help you prepare the wood you’ll need for specific projects you might choose to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good projects to fulfill your wants.

Playhouse Furniture Plans practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so that you can find the hang of using the tools. When starting out you can make a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Playhouse Furniture Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of tools and equipment. A little home workshop may generate a wide variety of simple projects which can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll perform your woodworking, based on the size of your home, you might have the ability to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Playhouse Furniture Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Playhouse Furniture Plans if you can have a dedicated spot for a workshop all the greater. Floor gear and bench top equipment can remain in place from project to project. If this setup is not impossible, at least try to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, establish a bench area where you are able to store and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools along with a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Playhouse Furniture Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools in your regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality gently used tools out there which belong to people who stumbled on that one molding job around the home or received tools as presents which they won’t ever utilize. You can usually purchase tools for these sellers for less than half the initial cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a couple added dollars on a cheap piece of gear. The extra cost of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this may prove to be the most flexible tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to construct an whole house. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your second job. After selecting the right saw put in an excellent blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t just cut curves. It’s perfect for cutting holes in timber also like handle slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber bits. {Begin with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a set of the maximum clamps that you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no tedious handle rotation. The timber beamed surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices which won’t crush or damage lots of the different woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of the most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your shop you might not be using the tape in these spans, the bigger tape steps provide more rigid tapes which will not flop around and slip off the end of boards. Measuring when you’re on your own will be a great deal easier, and naturally, quality tape steps can endure for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it makes sense to decide on the very best. I also have found over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Playhouse Furniture Plans

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Pee-wee's Playhouse

Pee-wee's Playhouse is an American children's television program starring Paul Reubens as the childlike Pee-wee Herman which ran from 1986 to 1990 on Saturday mornings on CBS, and airing in reruns until July 1991. The show was developed from Reubens' popular stage show and the TV special The Pee-wee Herman Show, produced for HBO, which was similar in style but featured much more adult humor.

The Pee-wee Herman character was developed by Reubens into a live stage show entitled The Pee-wee Herman Show in 1980. It featured many characters that would go on to appear in Playhouse, including Captain Carl, Jambi the Genie, Miss Yvonne, Pterri the Pterodactyl and Clocky. While enjoying continuous popularity with the show, Reubens teamed with young director Tim Burton in 1985 to make the comedy film Pee-wee's Big Adventure. It became one of the year's surprise hits, costing a relatively modest $6 million to make but taking in $45 million at the box office.

After seeing the success of Pee-wee's Big Adventure, the CBS network approached Reubens with an ill-received cartoon series proposal.[5] In 1986, CBS agreed to sign Reubens to act, produce, and direct his own live-action Saturday morning children's program, Pee-wee's Playhouse, with a budget of $325,000 per episode (comparable to that of a half-hour prime-time sitcom),[6] and full creative control (although CBS did request a few minor changes over the years).[7]

Video: Woodworking Projects