Popular Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re after because all the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are in fact many things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will be able to find any job of their choice in this bundle quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his best to direct them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools that novices will need. You may always add to your arsenal as you get experience!

Popular Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the authors in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it’s showing you the way to apply an end to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Popular Woodworking Plans

If you’re a beginner and very interested in doing a DIY job for home then, woodworking can be fun. If you don’t have the proper information, instruction, and ability, you may land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a few essential factors you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t start a project if you are not interested, as this may land you in a bad place.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and examine the time you have, until you begin with a job.

4. Start projects that you can finish. If you are in the midst of a work, then it is wise not to start any project at all.

The Benefits of Woodworking Popular Woodworking Plans

If you maintain these essential points in mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to start with. As a beginner, always select a job which has a very basic construct up or a very simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Popular Woodworking Plans

Tools would be the ways through which you can win the struggle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking jobs. Dependent on the type of project that you want to finish, pricing could be determined. The simple the job, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not need to purchase any more material aside from the wood ply.

Time and Instructions

Instructions are one of the primary things that every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the job. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it is possible to achieve success immediately. If you know the objective of woodworking, then the thing that you want to construct, the resources you require in order to possess and the typical time it’s possible to give every day; then you are all set to go.

Conclusion, Popular Woodworking Plans

All these tips and instruction is likely to create the woodworking projects and strategies for novices fast to complete. Always ensure you have all the vital tools, materials, space ready. Keep the instructions for constructing an item handy. Proper strategy and preparation will allow you to earn a great woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Popular Woodworking Plans

People if you’re trying to find a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which job to start out with because there are projects that can be too difficult for a beginner. But do not worry about that since we are going to provide you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you pick your job you need to know whether you have the available tools to work on such a project. Try not to spend a lot of money on purchasing equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Popular Woodworking Plans

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will give you time to research different projects and learn so many things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It’s extremely important that you know more about different types of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating pieces, learning which kind of wood they use can help you prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you understand the fundamentals of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Popular Woodworking Plans practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs utilizing various tools so that you can find the hang of working with the tools. When starting out you can make a range of mistakes but with time you will find out how to correctly use them and produce quality projects.

|

The Benefits of Woodworking Popular Woodworking Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop may produce a broad variety of simple projects which can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will perform your woodworking, based on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise might be the garage of your property.

This might help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Popular Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Popular Woodworking Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can remain in place from project to project. If this setup is not impossible, at least try to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the start, establish a seat area where you are able to store and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Popular Woodworking Plans

The scope of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in your local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality lightly used programs out there that belong to people who stumbled on that one molding project around the house or obtained tools as gifts which they won’t ever utilize. You can usually purchase tools for these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and possibly travel expenses. Weigh the benefits of traveling across town to save a couple extra dollars on a cheap piece of equipment. The excess cost of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to elevated sound levels. Select powerful hearing protection which you find comfortable and effective. These may include earplugs or full ear keyword muff protectors. I find a quality set of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the favorite name, this may end up being the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an entire house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you even start your second job. After selecting the proper saw install a quality blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander with a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a standard number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally requires the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps that you can spend. You may contact them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no tedious handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the different woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot range. Although in your shop you may not be using the tape at these lengths, the larger tape steps provide more rigid tapes that will not flop around and slide off the end of boards. Measuring when you’re by yourself will be a lot simpler, and of course, quality tape steps can last for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. The expense of glue through all your jobs is a little cost consideration. For that reason, it is sensible to go with the very best. I also have discovered over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Popular Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools