Portable Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they are after because most of the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are actually lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any project of their choice within this bundle quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the internet. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Portable Shed Plans

Woodworking is 1 hobby that can also be a rewarding profession if you like to work with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking projects and make a handsome profit. Portable Shed Plans.

It requires time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It will be a topic of conversation when you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking programs? Just how long can it take to complete the job? What kind of wood did you use? What type of tools did you use? How on earth did you create such a beautiful piece of furniture? As you speak about your work, a feeling of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Portable Shed Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Portable Shed Plans.

Start with a concept in your mind of what you want to construct then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking plan suggestions to get you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a few. Obviously, you can begin with as grand a woodworking plan as you pick. On the other hand, the chances are if you begin with a small woodworking project initially, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the quantity and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The beginner needs good woodworking tools, but it is simple to break the bank buying a lot of tools you might not utilize all that often. If you do buy tools, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry place to work and may need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that beginners will need. You can always add to your toolbox as you get experience!

Portable Shed Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the writers in woodworking publications do a story about how best to increase your woodworking craft. When it is showing you the way you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Portable Shed Plans

If you’re a beginner and very interested in doing a DIY project for home then, woodworking can be interesting. If you don’t have the proper information, education, and skill, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a job if you’re not interested, as this may land you in a terrible place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, until you begin with a job.

4. Start projects which you’re able to complete. If you are in the midst of some work, then it is better to not begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Portable Shed Plans

If you maintain these vital things in your mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you wish to start with. As a beginner, always select a project that has a very basic construct up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Portable Shed Plans

Tools are the means whereby you will win the battle of woodworking. A lot of people believe power tools are needs. But for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Based on the type of project you want to finish, pricing could be determined. The easy the project, the less cost it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it is much better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Directions are among the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very simple to understand the process, what to do and how to do it. It keyword is a systematic manual for finishing the job. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, the item that you need to construct, the tools you require in order to possess and the average time you can devote daily; then you are all set to go.

Conclusion, Portable Shed Plans

All these tips and education will create the woodworking projects and plans for novices quickly to complete. Always ensure you have all the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Proper strategy and planning will allow you to earn a great woodworking job for your home.

|

The Benefits of Woodworking Portable Shed Plans

Folks when looking for a way to pass time or desire an alternative method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be very careful when choosing which job to start out with since you will find jobs which may be too difficult for a newbie. But do not worry about that since we will give you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you need to know if you’ve got the available tools to work on that job. Try not to invest a good deal of cash on purchasing gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Portable Shed Plans

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will provide you time to research different jobs and find out a lot of things. That is why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about various projects.
It’s very important you know about the different types of wood available for making jobs. Expect carpenters use several types of wood quality for decorating bits, learning which kind of wood that they use can help you prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to fulfill your needs.

Portable Shed Plans practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of designs utilizing a variety of tools so that you may get the hang of using the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Portable Shed Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum number of gear and equipment. A little home workshop can generate a wide variety of simple projects that can help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space into your woodworking activities. This may be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the sound level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your property.

This might help decrease the problems of dust and noise, however depending on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Portable Shed Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. Portable Shed Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a seat area where you are able to store and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf beneath the bench to house your hand power tools along with a pegboard above the bench to hang additional equipment. Install a woodworking vice at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Portable Shed Plans

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. There are plenty of quality gently used tools out there which belong to individuals who stumbled on that 1 molding project around the house or received tools as gifts which they won’t ever use. You can usually buy tools for all these sellers for less than half of the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a few added bucks on a cheap piece of gear. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet generated sophisticated and complex pieces. Focus on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can end up being the most flexible instrument in a startup workshop. In reality, at the hands of a professional, a power hand saw could be employed to build an entire house. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your next job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut corners. It is perfect for cutting holes in timber too like manage slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander using just a bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Begin with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to collect a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Get a set of the longest clamps which you can spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the consumer to rapidly open and close the limbs with no dull handle turning. The timber beamed surfaces on your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape usually from the 25-foot range. Although in your store you might not be using the tape at these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the end of planks. Measuring when you’re on your own will be a lot easier, and of course, quality tape steps can last for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. The expense of adhesive through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Portable Shed Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment at the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Hangar

A hangar is a closed building structure to hold aircraft, or spacecraft. Hangars are built of metal, wood and concrete. The word hangar comes from Middle French hanghart ("enclosure near a house"), of Germanic origin, from Frankish *haimgard ("home-enclosure", "fence around a group of houses"), from *haim ("home, village, hamlet") and gard ("yard").

The Wright brothers stored and repaired their aircraft in a wooden hangar constructed in 1902 at Kill Devil Hills in North Carolina for their glider. After completing design and construction of the Wright Flyer in Ohio, the brothers returned to Kill Devil Hill only to find their hangar damaged. They repaired the structure and constructed a new workshop while they waited for the Flyer to be shipped.

Carl Richard Nyberg used a hangar to store his 1908 Flugan (fly) in the early 20th century and in 1909, Louis Bleriot crash-landed on a northern French farm in Les Baraques (between Sangatte and Calais) and rolled his monoplane into the farmer's cattle pen. Bleriot was in a race to be the first man to cross the English Channel in a heavier-than-air aircraft and set up his headquarters in the unused shed. In Britain, the earliest aircraft hangars were known as aeroplane sheds and the oldest survivors of these are at Larkhill, Wiltshire. These were built in 1910 for the Bristol School of Flying and are now Grade II* Listed buildings. British aviation pioneer Alliott Verdon Roe built one of the first aeroplane sheds in 1907 at Brooklands, Surrey and full-size replicas of this and the 1908 Roe biplane are on display at Brooklands Museum.

Video: Woodworking Tools