Post And Beam Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are following because most of the thoughts and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any project of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it will be endorsed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Nonetheless, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every possible way he can, through easy to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You may always increase your arsenal as you get experience!

Post And Beam Shed Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Each month the authors in woodworking publications do a story on how best to increase your woodworking craft. When it is showing you how you can apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Post And Beam Shed Plans

If you’re a beginner and very interested in doing a DIY project for house then, woodworking can be interesting. If you don’t have the right information, instruction, and ability, you may wind up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a job if you are not interested, as this may land you in a bad place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, before you start with a job.

4. Start jobs which you’re able to complete. If you’re in the midst of some work, then it’s wise not to start any project at all.

How to Become a Master Woodworker From Your Own Home Post And Beam Shed Plans

If you keep those vital things in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you want to begin with. As a beginner, always select a project that has a very basic build up or a simple structure. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Post And Beam Shed Plans

Tools would be the ways through which you will win the struggle of woodworking. Many men and women think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there on the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking jobs. Based on the sort of project that you would like to complete, pricing could be set. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is much better to fix a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not need to purchase any more material other than the timber ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is very easy to understand the process, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. But the most essential thing keyword which can help you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success immediately. If you understand the purpose of woodworking, the item you need to build, the resources you need in order to own and the average time you can give every day; then you’re ready to go.

Conclusion, Post And Beam Shed Plans

These tips and instruction will make the woodworking projects and strategies for beginners fast to finish. Always ensure that you have all the essential tools, materials, area ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation can help you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Post And Beam Shed Plans

People if you’re looking for a way to pass time or want an alternate method to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to start out with because there are jobs which may be too difficult for a beginner. But do not be concerned about that since we will provide you tips on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you choose your project you need to know whether you’ve got the available resources to work on such a project. Try not to spend a lot of cash on buying equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the artistic hand and the hands.

How to Become a Master Woodworker From Your Own Home Post And Beam Shed Plans

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will provide you time to explore unique jobs and learn so many things. That is why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about various projects.
It is extremely important that you know more about the different types of wood available for creating projects. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning which kind of wood they use will help you prepare the wood you will need for specific jobs you may want to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Post And Beam Shed Plans practice makes perfect so make sure that you practice your work daily if possible. Try out a lot of designs using various tools so that you can find the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Post And Beam Shed Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A small home workshop may generate a wide variety of simple projects that will help you develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will do your woodworking, Depending on the dimensions of your house, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your very first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, of course, the sound level. You can work without disturbing the remainder of the household. A good compromise could be the garage of your home.

This might help minimize the problems of dust and sound, however based on where you reside, a keyword garage layout might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Post And Beam Shed Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Post And Beam Shed Plans if you can have a dedicated spot for a marathon all the better. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the start, set up a bench area where you can shop and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the bench to hang additional equipment. Install a woodworking at one end of the bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Post And Beam Shed Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in the local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. You will find plenty of quality lightly used tools out there which belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for under half the original price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling around town to save a couple extra bucks on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may prove to be the most versatile tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an whole property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After choosing the proper saw install a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut curves. It’s ideal for cutting holes in timber too like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might discover your palm sander using just a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Start with a standard number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a few years to collect a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a set of the longest clamps which you could afford. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the user to rapidly open and close the jaws without tedious handle rotation. The wood clamping surfaces in your vice will occasionally need replacement. I would rather use soft pine in my vices that will not crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Purchase a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your shop you might not use the tape at these lengths, the bigger tape steps offer more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you are on your own will be a great deal easier, and naturally, quality tape measures can last for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The cost of adhesive through all your projects is a little cost consideration. For that reason, it is sensible to decide on the best. I also have discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Post And Beam Shed Plans

The peaceful gratification of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Luxor Las Vegas

Luxor Las Vegas is a 30-story hotel and casino situated on the southern end of the Las Vegas Strip in Paradise, Nevada. The hotel is owned and operated by MGM Resorts International and has a 120,000-square-foot (11,000 m2) casino with over 2,000 slot machines and 87 table games.[1][2]

After the 2008–2009 renovation work, the hotel's management modernized the property in its design to contain a total of 4,407 rooms (including 442 suites). The hotel's rooms line the interior walls of the main tower, which has a pyramid shape, and other recent 22-story twin ziggurat towers.[2][3][4]

As of 2010, the Luxor was designated as a 4 Key rating from the Green Key Eco-Rating Program, which evaluates what is known as "sustainable hotel operations."[6] The hotel features inclined elevators.

Video: Woodworking Projects