Pro Wood Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re after because most of the ideas and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are in fact many things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice in this bundle quite easily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools which beginners will need. You may always add to your arsenal as you gain experience!

Pro Wood Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Each month the authors in woodworking publications do a story on the best way best to increase your woodworking craft. When it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Pro Wood Plans

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking could be interesting. If you do not have the proper information, education, and skill, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t start a job if you are not interested, as this may land you in a terrible place.

2. Consider the main reason for making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and examine the time you have, before you begin with a job.

4. Start jobs that you can finish. If you are in the midst of some work, then it’s better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Pro Wood Plans

If you maintain those essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you want to begin with. As a newcomer, always pick a project which has a very basic build up or a simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Pro Wood Plans

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you purchase a hammer, always assess the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there in the marketplace. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them can help you ahead of time woodworking. You can also buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this is not a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Based on the type of job that you want to complete, pricing can be set. The easy the project, the less cost it involves. However, at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t need to buy any more material other than the timber ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. Instructions manual is very easy to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the job. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which will help you to achieve success is proper preparation. With proper planning and a strategy, it is likely to achieve success immediately. If you know the purpose of woodworking, the item that you want to build, the resources you need to own and the typical time you can give daily; then you’re ready to go.

Conclusion, Pro Wood Plans

These tips and instruction will create the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Pro Wood Plans

People if you’re looking for a way to pass time or want an alternate way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be quite cautious when choosing which job to begin with because there are jobs which can be too difficult for a newbie. But do not be concerned about that because we will give you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of if you have the available tools to work on such a project. Try not to spend a lot of cash on purchasing equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the hands.

The Benefits of Woodworking Pro Wood Plans

Woodworking at home will give you time to explore unique projects and learn a lot of things. That is why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It is very important that you know about the different types of wood available for creating projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you’ll need for certain jobs you might want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Pro Wood Plans practice makes perfect so make sure that you practice your work every day if possible. Try out a lot of designs using various tools so that you can get the hang of working with the tools. When starting out you may make a number of errors but with time you will learn how to properly use them and create quality projects.

|

The Benefits of Woodworking Pro Wood Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a wide array of simple projects that can allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you will perform your woodworking, based on the size of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the remainder of the household. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and sound, however depending on where you live, a keyword garage workshop may not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Pro Wood Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Pro Wood Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and gear. At the start, establish a bench area where you can shop and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf below the seat to home your hand power tools along with a pegboard above the seat to hang other equipment. Install a woodworking vice at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Pro Wood Plans

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. You will find plenty of quality gently used programs out there that belong to individuals who stumbled on that 1 molding job around the home or obtained tools as presents which they won’t ever use. You can usually buy tools for these sellers for under half the original price and save even more money should you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenses. Weigh the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this can prove to be the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be employed to build an whole house. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After choosing the right saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Begin with a hybrid blade. These have a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut corners. It’s ideal for cutting holes in timber also like handle slots. At some point, you’ll want to get a band saw. Bandsaws are even more versatile but a quality floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life will be poor and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents occur. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might find your palm sander using a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in timber bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a few years to accumulate a detailed set of wood clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps that you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the user to quickly open and close the jaws without tedious handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices that will not crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Purchase a good excellent name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you may not use the tape at these spans, the larger tape measures provide more rigid tapes which will not flop around and slip off the end of boards. Assessing when you are by yourself will be a great deal easier, and of course, quality tape steps can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles as well as chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap house brands sold as carpenter’s glue. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to go with the best. I also have discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Pro Wood Plans

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Pro forma

The term pro forma (Latin for "as a matter of form" or "for the sake of form") is most often used to describe a practice or document that is provided as a courtesy or satisfies minimum requirements, conforms to a norm or doctrine, tends to be performed perfunctorily or is considered a formality.

The pro forma accounting is a statement of the company's financial activities while excluding "unusual and nonrecurring transactions" when stating how much money the company actually made. Expenses often excluded from pro forma results include company restructuring costs, a decline in the value of the company's investments, or other accounting charges, such as adjusting the current balance sheet to fix faulty accounting practices in previous years.

There was a boom in the reporting of pro forma results in the USA starting in the late 1990s, with many dot-com companies using the technique to recast their losses as profits, or at least to show smaller losses than the US GAAP accounting showed. The U.S. Securities and Exchange Commission requires publicly traded companies in the United States to report US GAAP-based financial results, and has cautioned companies that using pro forma results to obscure US GAAP results would be considered fraud if used to mislead investors.

Video: Woodworking Tools