Professional Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are after because all the ideas and projects Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are actually many things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice in this bundle quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his best to direct them in every conceivable way he could, through simple to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. Therefore, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Professional Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the authors in woodworking magazines do a story on how to increase your woodworking craft. Whether it is showing you how to apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Professional Woodworking Plans

If you’re just beginning and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you do not have the proper information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your own hands is a special feeling. Don’t begin a project if you’re not interested, as this may land you at a terrible location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and analyze the time that you have, until you begin with a job.

4. Start jobs that you can finish. If you’re in the midst of a work, then it is better to not begin any project in any way.

How to Become a Master Woodworker From Your Own Home Professional Woodworking Plans

If you keep these essential things in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you want to begin with. As a beginner, always select a project which has a very basic build up or a very simple construction. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always proceed into the next level of woodworking jobs, like cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Professional Woodworking Plans

Tools would be the ways whereby you can win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might even purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the type of job you want to complete, pricing could be determined. The easy the project, the less price it involves. But at the very beginning buying the tools will be a little hefty. Therefore, it’s better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you do not need to buy any more material other than the wood ply.

Time and Directions

Instructions are among the primary things which each and every beginner should follow. Instructions manual is quite simple to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also plays a significant part in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the thing that you need to construct, the tools you need in order to own and the typical time it’s possible to give daily; then you’re all set to go.

Conclusion, Professional Woodworking Plans

These tips and instruction is likely to make the woodworking projects and strategies for novices quickly to finish. Always make sure you have all the essential tools, materials, area prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation will help you to make a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Professional Woodworking Plans

People if you’re looking for a way to pass time or desire an alternative method to make money they generally turn to a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be quite careful when choosing which project to start out with because you will find jobs which may be too difficult for a beginner. But don’t worry about that because we are going to provide you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you pick your project you need to be aware of whether you have the available tools to work on such a project. Try not to spend a lot of cash on buying gear when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Professional Woodworking Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to explore different jobs and find out so many things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at some time learning about different jobs.
It is very important you know more about different kinds of wood available for making projects. Expect carpenters use different types of wood quality for decorating pieces, learning what kind of wood that they use can help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you understand the basics of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Professional Woodworking Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs using various tools so that you may find the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Professional Woodworking Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a wide variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will perform your woodworking, based on the dimensions of your house, you may be able to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to set up your first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops is, clearly, the sound level. You can work without disturbing the rest of the family. A fantastic compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Professional Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Professional Woodworking Plans if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the start, set up a seat area where you are able to store and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf below the seat to home your hands power tools and a pegboard over the seat to hang additional equipment. Put in a woodworking vice at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Professional Woodworking Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, then purchase your quality tools in the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used tools out there which belong to people who embarked on that one molding job around the house or received tools as gifts that they will never utilize. You can usually buy tools for all these sellers for less than half the original price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple added dollars on a cheap piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may prove to be the most flexible tool in a start-up workshop. In reality, in the hands of an expert, a power hand saw could be employed to construct an whole property. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your second project. After selecting the right saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Start with a hybrid . These have a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut curves. It is perfect for cutting holes in timber too like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want in your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Although the most frequent, hammer injuries are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might find that your palm sander with a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and correct any imperfections in timber bits. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a pair of the maximum clamps which you can spend. You may contact them for smaller glue jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the user to quickly open and close the jaws without tedious handle turning. The wood beamed surfaces in your vice will periodically need replacement. I would rather use soft walnut in my vices which won’t crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your shop you might not be using the tape at these spans, the larger tape steps offer more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you are by yourself will be a great deal simpler, and of course, quality tape steps can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Get the number two and three Robertson set. I discover that the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not all glues are created equal. Stay away from inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all your projects is a minor cost consideration. For that reason, it makes sense to go with the very best. I also have discovered over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Professional Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimum investment at the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Hillerich & Bradsby

Hillerich & Bradsby Company (H&B) is a company located in Louisville, Kentucky that produces the famous Louisville Slugger baseball bat. The Louisville Slugger Museum & Factory in downtown Louisville features a retrospective of the product and its use throughout baseball history. H&B also makes baseball gloves, golf clubs, golf gloves and other equipment (under the PowerBilt brand).

J. F. Hillerich opened his woodworking shop in Louisville in 1855. During the 1880s, Hillerich hired his seventeen-year-old son, John "Bud" Hillerich. Legend has it that Bud, who played baseball himself, slipped away from work one afternoon in 1884 to watch Louisville's major league team, the Louisville Eclipse. The team's star, Pete "Louisville Slugger" Browning, mired in a hitting slump, broke his bat.

Bud invited Browning to his father's shop to hand-craft him a new bat to his own specifications. Browning accepted the offer, and got three hits to immediately break out of his slump with his new bat the first day he used it. Browning told his teammates, which began a surge of professional ball players to the Hillerich woodworking shop.

Video: Woodworking Projects