Project Blueprint | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are after because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are actually many things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those that are only getting started will find the ideas and projects in Ted’s package quite simple. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any job of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who purchase it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to direct them in every conceivable way he could, through easy to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You may always add to your toolbox as you get experience!

Project Blueprint Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Each month the writers in woodworking publications do a story on how to increase your woodworking craft. When it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Project Blueprint

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t begin a project if you are not interested, as this may land you at a terrible place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you start with a job.

4. Start projects that you’re able to finish. If you’re in the midst of some work, then it is better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Project Blueprint

If you maintain these essential things in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to begin with. As a beginner, always select a project that has a very basic build up or a very simple construction. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Project Blueprint

Tools would be the ways whereby you will win the struggle of woodworking. A lot of people believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws available in the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking jobs. Dependent on the type of project that you want to complete, pricing could be set. The easy the job, the less price it involves. But at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things that each and every newcomer should follow. Instructions manual is very simple to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects demand time and so it’s crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a plan, it’s possible to achieve success quickly. If you know the purpose of woodworking, the thing you need to construct, the tools you need in order to own and the typical time you can give every day; then you’re all set to go.

Conclusion, Project Blueprint

These strategies and instruction will create the woodworking projects and plans for beginners quickly to complete. Always ensure that you have all of the essential tools, materials, area ready. Read the instructions for building an item handy. Appropriate strategy and planning can allow you to earn a fantastic woodworking job for your home.

|

The Benefits of Woodworking Project Blueprint

People when trying to find a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be very cautious when choosing which job to begin with because you will find jobs which can be too tough for a newbie. But do not worry about that because we will give you guidelines on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to know whether you’ve got the available resources to work on such a job. Try not to invest a lot of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the hands.

Starting Your First Woodworking Shop Project Blueprint

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking in your home will give you time to explore different jobs and learn a lot of things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It is very important you know more about the different types of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning which kind of wood that they use will help you prepare the wood you will need for specific jobs you might want to pursue.
As soon as you understand the basics of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

Project Blueprint practice makes perfect so make sure you practice your work daily if at all possible. Try out a lot of layouts utilizing various tools so you can find the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Project Blueprint

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop can produce a wide variety of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll perform your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Project Blueprint

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Project Blueprint if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in place from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the start, set up a seat area where you can store and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf below the seat to house your hands power tools along with a pegboard over the seat to hang additional equipment. Put in a woodworking at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Project Blueprint

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at the regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find an abundance of quality lightly used tools out there which belong to individuals who embarked on that one molding project around the house or obtained tools as presents which they won’t ever utilize. You can usually buy tools for these sellers for less than half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to high noise levels. Last, wear a cap to keep the dust from your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this can end up being the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw can be used to build an whole property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in wood also like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents happen. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander with a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you could spend. You can get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs without dull handle rotation. The wood clamping surfaces on your vice will occasionally need replacement. I would rather use soft pine in my vices which won’t crush or damage many of the different woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among the most often used tools. Buy a good excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you might not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of boards. Assessing when you’re on your own will be a great deal easier, and of course, quality tape steps can endure for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive house brands sold as carpenter’s glue. The expense of glue through all your projects is a minor cost consideration. Therefore, it makes sense to decide on the best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Project Blueprint

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

CodeBook

The software allows the user to design using the conventional design tools (for example: Autodesk Revit, Bentley Microstation, Graphisoft ArchiCAD) and elements, and to create and interrogate a separate BIM database. CodeBook's BIM database contains information gathered during the building's full life cycle, from scoping and concept stages through detailed design and construction to CMMS/FM handover.

Video: Woodworking Projects