Projects To Build With Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are in fact many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People that are only getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice within this package quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found across the net. Ted has done his very best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

The Benefits of Woodworking Projects To Build With Wood

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Projects To Build With Wood.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a topic of conversation whenever you have friends come over to visit. They will ask: How can you create it? How long can it take to finish the project? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful item of furniture? As you discuss your job, a sense of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Projects To Build With Wood

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Projects To Build With Wood.

Start with a concept in mind of what you want to construct and then get a excellent woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking retailers. Obviously, you can start out with as expansive a woodworking plan as you pick. On the other hand, the odds are if you start out with a small woodworking job at first, you will have a better chance of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the amount and type of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Only buy what you need to complete your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not use all that often. If you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and might require a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You may always add to your arsenal as you gain experience!

Projects To Build With Wood Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Each month the authors in woodworking magazines do a story on the best way to increase your woodworking craft. Whether it is showing you the way you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Projects To Build With Wood

If you’re just beginning and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the right information, education, and skill, you might wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential aspects that you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a job if you’re not interested, as this may land you in a bad location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, before you begin with a project.

4. Start jobs that you’re able to finish. If you are in the middle of a work, then it is better to not start any project at all.

Starting Your First Woodworking Shop Projects To Build With Wood

If you keep these essential points in mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to begin with. As a newcomer, always pick a job that has a very basic construct up or a simple construction. Some simple to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always proceed to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should always keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Projects To Build With Wood

Tools would be the means whereby you can win the struggle of woodworking. A lot of people think that power tools are needs. But for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might even purchase keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but having it would make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Dependent on the type of job you want to finish, pricing can be set. The easy the project, the less price it involves. However, at the beginning buying the tools will probably be somewhat hefty. Because of this, it’s better to resolve a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you do not have to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword which will allow you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you understand the objective of woodworking, then the item you need to build, the tools you need in order to possess and the average time you can devote every day; then you are ready to go.

Conclusion, Projects To Build With Wood

These tips and education is likely to create the woodworking projects and plans for novices quickly to finish. Always ensure you have all the vital tools, materials, space ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation can help you to make a great woodworking project for your property.

|

Starting Your First Woodworking Shop Projects To Build With Wood

Folks if you’re trying to find a way to pass time or want an alternative way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which project to start out with since you will find jobs that can be too tough for a beginner. But don’t be concerned about that because we will give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, therefore before you pick your project you have to be aware of if you have the available tools to work on that project. Try not to invest a lot of cash on buying equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Projects To Build With Wood

Woodworking in your home will provide you time to explore different jobs and learn a lot of things. That’s why it’s important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different projects.
It’s extremely important you know more about different kinds of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which type of wood that they use can help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to fulfill your needs.

Projects To Build With Wood practice makes perfect so be sure that you practice your work daily if possible. Try out lots of layouts using various tools so you can find the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Projects To Build With Wood

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimal amount of tools and equipment. A small home workshop may produce a broad variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will do your woodworking, Depending on the size of your home, you may be able to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to set up your first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, of course, the sound level. You can work without disturbing the remainder of the household. A fantastic compromise could be the garage of your home.

This can help decrease the problems of dust and noise, however depending on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Projects To Build With Wood

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Projects To Build With Wood if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf below the bench to home your hand power tools along with a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Projects To Build With Wood

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. There are plenty of quality lightly used programs out there that belong to people who stumbled on that 1 molding job around the home or received tools as gifts which they won’t ever utilize. You can usually purchase tools for all these sellers for under half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh out the advantages of traveling around town to save a few extra dollars on a cheap piece of gear. The extra expense of travel and time in these situations is generally justified when buying large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this can end up being the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw could be used to build an whole property. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second job. After choosing the right saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid blade. These possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’re going to want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want in your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Although the most frequent, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might find that your palm sander using a bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps that you can spend. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws with no dull handle rotation. The timber clamping surfaces on your vice will periodically require replacement. I would rather utilize soft pine in my vices which will not crush or damage lots of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your store you may not use the tape at these spans, the larger tape measures offer more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape steps can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I discover that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The cost of adhesive through all your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Projects To Build With Wood

The peaceful gratification of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Bob the Builder characters

Video: Woodworking Projects