Quality Woodworking Hand Tools | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re following because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those that are only getting started will find the ideas and projects in Ted’s bundle quite easy. Without doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice within this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Nonetheless, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual directions, clear images and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools which novices will need. You may always increase your arsenal as you get experience!

Quality Woodworking Hand Tools Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the writers in woodworking publications do a story on the best way to increase your woodworking craft. When it’s showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Quality Woodworking Hand Tools

If you are a beginner and very interested in doing a DIY project for house then, woodworking could be fun. If you don’t have the right information, instruction, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Don’t begin a job if you’re not interested, because this might land you at a terrible location.

2. Consider the main reason for creating this woodworking project. Choose the uses of the thing you are making.

3. Consider your skills and examine the time you have, before you start with a project.

4. Start projects which you can complete. If you are in the midst of some work, then it’s wise to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Quality Woodworking Hand Tools

If you maintain these essential points in your mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to begin with. As a newcomer, always pick a job that has a very basic build up or a very simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always proceed to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Quality Woodworking Hand Tools

Tools are the means whereby you can win the battle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for beginners, but using it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking projects. Based on the sort of job you want to finish, pricing can be set. The easy the project, the less cost it involves. However, at the very beginning buying the tools will be somewhat hefty. Because of this, it’s better to resolve a budget on the tools, then keyword on the project. Purchasing the basic tools will ensure that you don’t need to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things which every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to comprehend the process, what to do and the way to get it done. Time also has an important role in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that will help you to reach success is proper preparation. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the objective of woodworking, then the thing you want to build, the resources you need in order to possess and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Quality Woodworking Hand Tools

These tips and education is likely to create the woodworking projects and strategies for beginners quickly to complete. Always make sure that you have all of the vital tools, materials, space ready. Keep the instructions for constructing an item handy. Proper strategy and preparation can allow you to earn a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Quality Woodworking Hand Tools

Folks when looking for a way to pass time or want an alternate method to generate money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking at home there are lots of jobs one can consider. When starting out you need to be very careful when choosing which job to start out with since there are jobs that may be too difficult for a beginner. But do not be concerned about that because we will give you guidelines on the right means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you pick your job you have to be aware of if you’ve got the available resources to work on such a job. Try not to invest a lot of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Quality Woodworking Hand Tools

Woodworking in your home will provide you time to explore different projects and learn a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make mistakes and at any time learning about different projects.
It’s extremely important that you know more about the different types of wood available for making projects. Expect carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood that they use can allow you to prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to fulfill your needs.

Quality Woodworking Hand Tools practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of designs using a variety of tools so that you can get the hang of using the tools. When starting out you may earn a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Quality Woodworking Hand Tools

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a broad variety of simple projects that can help you develop your creative and building skills while rewarding you with practical and artistic wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you’ll perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space into your woodworking tasks. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the top levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Quality Woodworking Hand Tools

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Quality Woodworking Hand Tools if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a bench area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf below the seat to home your hand power tools and a pegboard above the seat to hang other gear. Put in a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Quality Woodworking Hand Tools

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality gently used programs out there that belong to individuals who embarked on that one molding job around the house or received tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of equipment. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the popular name, this can prove to be the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be used to build an whole house. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second project. After choosing the right saw put in a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut curves. It’s ideal for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find your palm sander using a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood bits. {Begin with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you can afford. You can contact them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle rotation. The wood beamed surfaces in your vice will occasionally need replacement. I prefer to use soft pine in my vices which will not crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your shop you may not use the tape in these lengths, the larger tape measures offer more rigid tapes which will not flop around and slide off the end of planks. Measuring when you’re on your own will be a great deal easier, and naturally, quality tape steps can endure for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood.

What is Woodworking? The Benefits of Woodworking Quality Woodworking Hand Tools

Woodworking is referred to as the construction or the production of items from wood. You can create a lot of different objects from woodworking and these items are often as big as gazebos or as little as wooden toys. However big or small your personal project maybe you’ll be very likely to do that aim with woodworking. In addition, woodworking has many private in addition to psychological benefits! In this guide, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

A good deal of individuals who love to use their hands have turned that love into a profession through woodworking. People who build things from wood are generally known keyword as carpenters. Carpenters can operate on a variety of woodworking jobs and job types. For instance, a few carpenters possess their carpentry company and these folks have the luxury to set their work hours. This advantage enables carpenters the chance to spend additional time with their own families and have less job strain. Raising children is a very difficult task regardless of what way you approach the endeavor! To get a carpenter who owns their own company, this task might not be as hard since that person is going to have more time to become a part of her or his child’s life. By playing a bigger role in the life span of your child you’ll be having a greater influence on the type of personality that kid develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry can also have health benefits too.

Starting Your First Woodworking Shop Quality Woodworking Hand Tools

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which results in better physical health. Keeping your body physically fit is really important and keyword will help prevent the occurrence of various ailments in the foreseeable future life. By being physically fit you can reduce chances you will have a heart attack, have seizures, become a diabetic, and reduce the chances of having a range of different illnesses.

Quality Woodworking Hand Tools, Do It Yourself Woodworking Saves Cash:

I always feel as that I paid way too far when I visit home improvement stores and purchase patio furniture, and I am certain that I am not the only person that has felt this way! A successful business owner once told me to always increase the sales price of a product to double everything you’ve got it for. In this manner, you can always decrease the product to 50 percent off and come out without getting any losses. This seems like it may be the same tactic that home improvement shops use in selling their own wooden furniture products. Regardless, there’s a way which it is possible to get around paying the additional money and that’s to do with building it yourself. Fortunately, there are some really good woodworking products that offer thousands of detailed woodworking keyword strategies for countless different project types. So, you really can build anything you need or see in almost any home improvement store. Doing something does take a little bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

DeWalt

DeWalt (trademarked as DᴇWALT) is an American worldwide brand of power tools and hand tools for the construction, manufacturing and woodworking industries. DeWalt is a trade name of Black & Decker (U.S.) Inc., a subsidiary of Stanley Black & Decker.

The original company was started in 1923 by Raymond E. DeWalt, the inventor of the radial arm saw. The company grew quickly and was reorganized and re incorporated in 1947 as DeWalt Inc. After buying the company in 1949, American Machine & Foundry Co., Inc. sold it to Black & Decker in 1960. Black & Decker divested itself of the radial arm saw manufacturing branch in 1989, selling it to two executives. Radial arm saws that use the original DeWalt design can still be obtained from the Original Saw Co.[2]

In 1992, Black & Decker started a major effort to rebrand its professional quality and high end power tools to DeWalt. In 1994, DeWalt took over the German wood working power tool producer ELU. DeWalt increased their line of tools using ELU's technology. As of 2001, DeWalt manufactures and sells more than 200 different power hand tools and 800 accessories.

Video: Woodworking Tools