Quick Easy Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are after because all the ideas and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found across the net. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Quick Easy Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the authors in woodworking magazines do a story about the best way best to increase your woodworking craft. Whether it’s showing you the way to apply an end to a finished project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Quick Easy Wood Projects

If you’re just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking could be fun. If you don’t have the right information, instruction, and skill, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a few essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Don’t begin a job if you’re not interested, because this might land you at a bad location.

2. Think of the primary reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time you have, before you begin with a project.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it is wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Quick Easy Wood Projects

If you maintain those vital things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs that you wish to start with. As a beginner, always pick a job that has quite a basic build up or a simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Quick Easy Wood Projects

Tools are the means whereby you will win the struggle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much easy.

8. Additional small and basic tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking jobs. Dependent on the sort of job you want to finish, pricing can be set. The simple the project, the less price it involves. But at the beginning buying the tools will be a little hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things which every beginner should follow. Instructions guide is very simple to comprehend the procedure, what to do and how to do it. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper planning. With appropriate planning and a plan, it’s possible to achieve success immediately. If you know the objective of woodworking, the thing that you need to construct, the tools you need in order to possess and the average time you can give every day; then you are all set to go.

Conclusion, Quick Easy Wood Projects

All these tips and education is likely to create the woodworking projects and plans for novices fast to finish. Always ensure you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning will help you to make a fantastic woodworking project for your property.

|

The Benefits of Woodworking Quick Easy Wood Projects

People when looking for a way to pass time or desire an alternative way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very cautious when choosing which project to begin with because you will find projects that may be too tough for a newbie. But don’t worry about that because we are going to give you guidelines on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you have to be aware of if you’ve got the available resources to work on that job. Try not to spend a good deal of money on buying equipment when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Quick Easy Wood Projects

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to research unique projects and learn a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different jobs.
It is extremely important that you know more about different types of wood available for creating projects. Expect carpenters use several types of wood quality for decorating bits, learning which kind of wood that they use can allow you to prepare the wood you will need for certain projects you might want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good projects to satisfy your wants.

Quick Easy Wood Projects practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using various tools so you may find the hang of using the tools. When starting out you may earn a range of errors but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Quick Easy Wood Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop can produce a wide variety of simple projects that can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you’ll perform your woodworking, Depending on the size of your home, you may have the ability to create a dedicated space into your woodworking activities. This may be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the family. A fantastic compromise could be the garage of your property.

This can help minimize the problems of dust and sound, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Quick Easy Wood Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Quick Easy Wood Projects if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the start, establish a bench area where you can store and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Add a sturdy shelf below the bench to house your hand power tools along with a pegboard above the bench to hang other equipment. Install a woodworking vice at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Quick Easy Wood Projects

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools in your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. There are an abundance of quality gently used tools out there which belong to individuals who embarked on that 1 molding project around the house or received tools as gifts which they won’t ever utilize. You can usually buy tools for these sellers for under half of the initial price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling around town to save a couple added bucks on a inexpensive piece of gear. The extra expense of time and travel in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand gear yet generated sophisticated and complex bits. Focus on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to elevated noise levels. These can include earplugs or complete ear keyword muff protectors. I find a quality set of ear muff guards is perfect for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this may end up being the most versatile instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be used to build an whole property. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second job. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It is ideal for cutting holes in timber too like handle slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want on your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander with a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the maximum clamps which you could afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to rapidly open and close the jaws without dull handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices that will not crush or damage lots of the different woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Purchase a fantastic quality name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you might not use the tape in these spans, the larger tape steps offer more rigid tapes that won’t flop around and slip off the end of boards. Assessing when you are on your own will be a lot easier, and of course, quality tape steps can last for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid cheap home brands marketed as carpenter’s glue. The expense of glue through all of your jobs is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have found over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Quick Easy Wood Projects

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood finishing

Wood finishing refers to the process of refining or protecting a wooden surface, especially in the production of furniture where typically it represents between 5 and 30% of manufacturing costs.[1][2]

Finishing is the final step of the manufacturing process that gives wood surfaces desirable characteristics, including enhanced appearance and increased resistance to moisture and other environmental agents. Finishing can also make wood easier to clean[3] and keep it sanitized, sealing pores that can be breeding grounds for bacteria. Finishing can also influence other wood properties, for example tonal qualities of musical instruments and hardness of flooring.[4][5] In addition, finishing provides a way of giving low-value woods the appearance of ones that are expensive and difficult to obtain.

Finishing of wood requires careful planning to ensure that the finished piece looks attractive, performs well in service and meets safety and environmental requirements.[6] Planning for finishing begins with the design of furniture.[6] Care should be taken to ensure that edges of furniture are rounded so they can be adequately coated and are able to resist wear and cracking. Careful attention should also be given to the design and strength of wooden joints to ensure they do not open-up in service and crack the overlying finish.[7] Care should also be taken to eliminate recesses in furniture, which are difficult to finish with some systems, especially UV-cured finishes.[8]

Video: Woodworking Projects