Quick Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are after because all the ideas and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are actually lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this bundle quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who buy it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his very best to guide them in every conceivable way he could, through simple to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Quick Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the authors in woodworking magazines do a story on how best to improve your woodworking craft. Whether it is showing you the way you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Quick Wood Projects

If you are just beginning and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you do not have the right information, education, and skill, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you need to remember, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t start a project if you’re not interested, because this might land you at a bad place.

2. Consider the main reason for making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and analyze the time that you have, before you begin with a job.

4. Start jobs which you’re able to complete. If you’re in the middle of some work, then it is better not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Quick Wood Projects

If you keep those essential things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects you wish to begin with. As a newcomer, always select a job that has quite a basic build up or a simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Quick Wood Projects

Tools would be the means whereby you will win the battle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there in the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking jobs. Dependent on the sort of project you want to finish, pricing could be determined. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will be a little hefty. Therefore, it is better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to buy any more material aside from the wood ply.

Time and Directions

Directions are one of the principal things which every newcomer should follow. Instructions guide is quite simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also plays an important role in the construction of woodworking projects. Woodworking projects demand time and therefore it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword which will help you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you know the purpose of woodworking, then the thing that you want to build, the resources you need to own and the typical time you can give every day; then you are all set to go.

Conclusion, Quick Wood Projects

These tips and education is likely to create the woodworking projects and strategies for novices quickly to complete. Always ensure you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and planning will allow you to earn a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Quick Wood Projects

Folks when trying to find a way to pass time or want an alternate way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very careful when choosing which job to start out with because there are projects which may be too difficult for a beginner. But do not be concerned about that because we are going to provide you tips on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you need to be aware of whether you have the available tools to work on such a job. Try not to invest a good deal of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Quick Wood Projects

Woodworking in your home will give you time to explore unique jobs and learn a lot of things. That’s why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about different jobs.
It’s extremely important you know more about different types of wood available for making jobs. Expect carpenters use several kinds of wood quality for decorating bits, learning which kind of wood that they use can help you prepare the wood you will need for certain projects you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to satisfy your wants.

Quick Wood Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts using various tools so that you may find the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will find out how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Quick Wood Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of gear and equipment. A small home workshop may generate a broad array of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you might be able to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise might be the garage of your property.

This can help decrease the problems of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Quick Wood Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Quick Wood Projects if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can remain in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the beginning, establish a bench area where you can shop and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Add a sturdy shelf beneath the seat to home your hand power tools and a pegboard over the bench to hang additional equipment. Install a woodworking at one end of the bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Quick Wood Projects

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. There are plenty of quality gently used tools out there which belong to people who stumbled on that 1 molding project around the house or received tools as gifts that they will never utilize. You can usually buy tools for these sellers for under half the original price and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh out the advantages of traveling across town to save a few extra dollars on a cheap piece of gear. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire faster when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust from your hair. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can prove to be the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw could be employed to construct an whole house. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After selecting the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll discover your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in wood pieces. {Begin with a standard number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a set of the maximum clamps that you can afford. You can contact them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enabled the user to rapidly open and close the limbs without dull handle rotation. The timber beamed surfaces in your vice will periodically require replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your store you may not use the tape in these spans, the larger tape measures offer more rigid tapes which won’t flop around and slip off the ending of boards. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape steps can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I discover that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The cost of glue through all of your jobs is a minor cost consideration. Therefore, it is sensible to decide on the very best. I have also found over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Quick Wood Projects

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Ed Wood

In the 1950s, Wood made a number of low-budget films in the science fiction, crime and horror genres, intercutting stock footage. In the 1960s and 1970s, he made sexploitation movies and wrote over 80 pulp crime, horror and sex novels. In 1975, he was awarded a Golden Turkey Award as Worst Director of All Time, renewing public interest in his work.[1] Wood's career and camp approach has earned him and his films a cult following.

Following the publication of Rudolph Grey's 1992 oral biography Nightmare of Ecstasy: The Life and Art of Edward D. Wood Jr., the public took a greater interest in Wood, leading up to director Tim Burton's biopic of Wood's life, Ed Wood (1994), a critically acclaimed film starring Johnny Depp as Wood that earned two Academy Awards.

Wood's father, Edward Sr., worked for the U.S. Postal Service as a custodian, and his family relocated numerous times around the United States. Eventually, they settled in Poughkeepsie, New York, where Ed Wood Jr. was born in 1924. According to Wood's second wife, Kathy O'Hara, Wood's mother Lillian would dress him in girl's clothing when he was a child because she had always wanted a daughter.[2] For the rest of his life, Wood crossdressed, infatuated with the feel of Angora on his skin.[3][4]

Video: Woodworking Projects