Quick Woodshop Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every conceivable way he could, through easy to understand textual directions, clear pictures and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Quick Woodshop Projects

Woodworking is one hobby that could also be a rewarding career if you love to work together with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Quick Woodshop Projects.

It takes time to become skilled in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll be able to create some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It’ll be a subject of conversation whenever you have friends come over to see. They’ll ask: How did you create it? Where did you get the woodworking plans? How long can it take to finish the project? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Quick Woodshop Projects

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Quick Woodshop Projects.

Start with an idea in mind of what you would like to construct and then get a really good woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a few. Obviously, you can start out with as grand a woodworking plan as you pick. On the other hand, the odds are if you start out with a little woodworking job initially, you’ll have a better prospect of keyword finishing the job.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and type of wood needed, and the required hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you might not use all that frequently. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood glue! Obviously, you’ll need a dry area to work and may need a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Quick Woodshop Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Every month the writers in woodworking publications do a story on how to increase your woodworking craft. Whether it is showing you the way to apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Quick Woodshop Projects

If you’re just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you do not have the right information, education, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a project if you’re not interested, because this might land you in a terrible place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of this item you are making.

3. Consider your abilities and examine the time you have, until you start with a project.

4. Start projects which you’re able to complete. If you are in the midst of a work, then it is better to not begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Quick Woodshop Projects

If you maintain those vital things in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking jobs you wish to begin with. As a newcomer, always pick a job which has quite a basic construct up or a simple construction. A few simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Quick Woodshop Projects

Tools are the ways whereby you can win the battle of woodworking. Many people believe power tools are requires. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there on the marketplace. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You might also buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking projects. Based on the sort of job that you want to finish, pricing could be determined. The simple the project, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things that each and every beginner should follow. Instructions manual is quite simple to comprehend the process, what to do and how to get it done. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword that will help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, then the item that you want to build, the tools you need in order to possess and the average time it’s possible to devote every day; then you’re ready to go.

Conclusion, Quick Woodshop Projects

All these strategies and instruction is likely to make the woodworking projects and plans for beginners quickly to finish. Always make sure you have all of the vital tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and planning will help you to make a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Quick Woodshop Projects

Folks when trying to find a way to pass time or desire an alternative method to generate money they generally turn into a hobby that they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be quite careful when choosing which project to start out with since you will find jobs that may be too tough for a beginner. But don’t worry about that because we are going to give you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your project you need to be aware of whether you’ve got the available resources to work on such a project. Try not to spend a good deal of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any difference between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Quick Woodshop Projects

Woodworking at home will give you time to research unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so you can afford to make mistakes and at any time learning about different jobs.
It’s very important that you know about different types of wood available for making projects. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you’ll need for specific jobs you may choose to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to fulfill your wants.

Quick Woodshop Projects practice makes perfect so make sure that you practice your work daily if possible. Try out a lot of designs utilizing various tools so you may get the hang of using the tools. When starting out you can earn a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Quick Woodshop Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a broad array of simple projects which will help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you’ll do your woodworking, based on the size of your home, you may have the ability to create a dedicated space into your woodworking tasks. This may be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the upper levels of the home. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the remainder of the family. A good compromise might be the garage of your property.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Quick Woodshop Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Quick Woodshop Projects if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least try to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you can store and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to home your hands power tools along with a pegboard above the seat to hang other equipment. Put in a woodworking at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Quick Woodshop Projects

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality lightly used tools out there which belong to individuals who stumbled on that 1 molding job around the house or received tools as presents that they will never utilize. You can usually purchase tools for all these sellers for less than half the initial price and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private people will take additional time and possibly travel expenses. Weigh the advantages of traveling around town to save a couple added bucks on a cheap piece of equipment. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to high noise levels. Select effective hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular name, this may prove to be the most flexible tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be used to construct an whole house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second job. After choosing the right saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut curves. It is ideal for cutting holes in wood also like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover that your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in wood bits. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a few years to collect a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you could spend. You can contact them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I would rather utilize soft walnut in my vices that will not crush or damage lots of the different woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most frequently used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually from the 25-foot selection. Even though in your store you might not be using the tape at these spans, the bigger tape steps provide more rigid tapes that won’t flop around and slip off the ending of boards. Measuring when you are by yourself will be a lot simpler, and of course, quality tape steps can last for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap home brands marketed as carpenter’s glue. The cost of adhesive through all your projects is a little cost consideration. For that reason, it makes sense to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Quick Woodshop Projects

The peaceful gratification of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected]alintelligence.com – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Noguchi Museum

The Noguchi Museum, chartered as The Isamu Noguchi Foundation and Garden Museum, was designed and created by the Japanese-American sculptor Isamu Noguchi. Opening on a limited basis to the public in 1985 the purpose of the museum and foundation was and remains to preserve and display Noguchi's sculptures, architectural models, stage designs, drawings, and furniture designs. The two-story, 24,000 square feet (2,200 m2) museum and adjacent sculpture garden, located in Long Island City section of Queens, one block from the Socrates Sculpture Park, underwent major renovations in 2004 allowing the museum to stay open year-round.[1]

To house the museum, in 1974 Noguchi purchased a photogravure plant and gas station located across the street from his New York studio, where he had worked and lived since 1961.[2] The Isamu Noguchi Garden Museum opened to the public in 1985 on a seasonal basis.

In 1999 the Foundation Board approved a $13.5 million capital master plan to address structural concerns, ADA and NYC Building Code compliance and create a new public education facility. During renovation, the Museum relocated to a temporary space in Sunnyside, Queens, and held several thematic exhibitions of Noguchi's work. In February 2004, the museum was formally chartered as a museum, and granted 501(c)(3) public charity status. The Noguchi Museum reopened to the public at its newly renovated space in June 2004. The museum building continued to suffer from structural issues into the early 2000s and a second $8 million stabilization project was begun in September 2008.[3]

Video: Woodworking Tools