Rocker Woodworking | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because all the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are actually lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those that are only getting started will discover the ideas and projects in Ted’s package quite simple. Without doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice in this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every conceivable way he could, through easy to understand textual directions, clear pictures and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Rocker Woodworking

Woodworking is one hobby that could also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll be able to construct all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Rocker Woodworking.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will have the ability to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you create it? Just how long can it take to finish the project? What type of tools did you use? How on earth did you make such a gorgeous item of furniture? As you discuss your work, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Rocker Woodworking

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Rocker Woodworking.

Begin with a concept in your mind of what you want to build then get a really good woodworking project plan that is geared toward novices. There are several little woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can begin with as grand a woodworking plan as you choose. However, the odds are if you begin with a little woodworking job initially, you’ll have a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and type of wood required, and the essential hand tools and power tools to complete the project. Note: A word of caution about purchasing woodworking tools. Only buy what you want to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you might not utilize all that frequently. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry place to work and might need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools that beginners will need. You can always increase your toolbox as you gain experience!

Rocker Woodworking Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking publications do a story on how best to increase your woodworking craft. Whether it is showing you the way you can apply an end to a finished job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Rocker Woodworking

If you’re a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a particular feeling. Don’t start a job if you are not interested, because this might land you in a terrible location.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start jobs which you’re able to finish. If you’re in the middle of some work, then it’s wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Rocker Woodworking

If you keep those essential things in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you wish to start with. As a beginner, always pick a job that has quite a basic construct up or a simple construction. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always proceed to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Rocker Woodworking

Tools would be the ways through which you will win the battle of woodworking. Many men and women think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Dependent on the sort of project you would like to finish, pricing can be determined. The easy the job, the less price it involves. However, at the beginning purchasing the tools will be a little hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Directions

Directions are one of the primary things which every newcomer should follow. Instructions manual is quite easy to understand the process, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also has a significant role in the building of woodworking projects. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the objective of woodworking, the item you need to build, the resources you require to own and the average time it’s possible to devote daily; then you are ready to go.

Conclusion, Rocker Woodworking

These strategies and instruction will make the woodworking projects and strategies for beginners fast to complete. Always make sure that you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and planning will allow you to earn a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Rocker Woodworking

Folks if you’re looking for a way to pass time or desire an alternate way to generate money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be quite careful when choosing which job to start out with since there are jobs that can be too tough for a newbie. But don’t worry about that because we will provide you guidelines on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your project you need to know whether you’ve got the available tools to work on that job. Try not to spend a good deal of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand as well as the hands.

The Benefits of Woodworking Rocker Woodworking

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will give you time to explore different projects and find out so many things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at some time learning about various projects.
It is very important that you know more about different types of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning what kind of wood that they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to satisfy your wants.

Rocker Woodworking practice makes perfect so make sure you practice your work every day if at all possible. Try out a lot of designs using various tools so you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Rocker Woodworking

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a wide array of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the dimensions of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the sound level. You can work without bothering the rest of the family. A good compromise might be the garage of your property.

This can help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Rocker Woodworking

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Rocker Woodworking if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in place from project to project. If this installation isn’t hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to house your hands power tools along with a pegboard over the seat to hang other gear. Put in a woodworking vice at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Rocker Woodworking

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at the regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find plenty of quality lightly used tools out there that belong to people who embarked on that 1 molding project around the house or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for under half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and possibly travel expenditures. Weigh the advantages of traveling across town to save a few extra bucks on a cheap piece of gear. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this may end up being the most flexible tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an whole property. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you start your next job. After choosing the right saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in wood also like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll find that your palm sander with a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a set of the maximum clamps which you can spend. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of your seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs without tedious handle rotation. The timber beamed surfaces in your vice will periodically need replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Buy a good quality name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your shop you may not be using the tape at these lengths, the larger tape steps offer more rigid tapes which won’t flop around and slide off the end of boards. Assessing when you’re on your own will be a lot easier, and of course, quality tape measures can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Rocker Woodworking

Woodworking is referred to as the construction or the production of items from wood. You can produce a lot of unique objects from woodworking and these items can be as large as gazebos or as small as wooden toys. No matter how large or small your private project maybe you’ll be quite likely to accomplish that goal with woodworking. Additionally, woodworking has lots of personal as well as emotional benefits! In this article, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

Individuals who build things from wood are generally known keyword as carpenters. Carpenters can work on a variety of woodworking jobs and job types. For example, some carpenters possess their carpentry company and these folks have the luxury to set their work hours. This benefit allows carpenters the opportunity to spend more time with their own families and have less job stress. Raising kids is a really difficult task regardless of what way you approach the task! For a carpenter who owns their own company, this task might not be hard because that individual is going to have more time to become part of her or his child’s life. By playing a larger part in the life span of your child you’ll be having a larger influence on the sort of personality that kid develops into, which is a massive concern for any loving parent. In addition to these benefits, carpentry may also have health benefits as well.

Starting Your First Woodworking Shop Rocker Woodworking

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Keeping your body physically fit is really important and keyword will help prevent the incidence of various illnesses in the foreseeable future life. By being physically fit you can decrease chances you will have a heart attack, have seizures, become a diabetic, and reduce the odds of giving birth to a range of other disorders.

Rocker Woodworking, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I go to home improvement shops and purchase patio furniture, and I am certain that I am not the only person who has felt this way! A successful business owner once told me to constantly raise the sales price of a commodity to double everything you obtained it for. This way, you can always reduce the product to 50 percent off and come out without getting any losses. This sounds like it might be the exact same tactic that home improvement shops use in selling their wooden furniture products. Regardless, there’s a way which you can get around paying the extra cash and that’s to do with building it yourself. Fortunately, there are several really excellent woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. So, you really can build anything you need or see in almost any home improvement store. Doing something yourself does take a bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Robert Erickson (furniture designer)

Robert Erickson (born Lincoln, Nebraska 1947) is an American furniture designer and woodworker in Nevada City, California. He is a studio maker, who custom designs chairs and other furniture. His work is in several U.S. national collections.

After leaving University of Nebraska with an English degree in 1969, Erickson traveled to Druid Heights in Marin County, California to study with furniture makers Ed Stiles and Roger Somers.[1][2] In the summer of 1970, Erickson was employed by Pulitzer Prize-winning poet Gary Snyder, said to be inspiration for Jack Kerouac's The Dharma Bums. His role was to help hand-build a Japanese and Native American-inspired home in Nevada County, California.[1][2] Erickson Woodworking was established next to Snyder's property the same year when he bought a plot of land to build his workshop, and he also sold his first chair.[3] The wood shop has operated in this location since that time – now with the addition of solar power and phone lines.[4] Most of Erickson's chairs incorporate the "contoured floating back" design, which he began incorporating into his chairs in 1974.[5][6] Robert Erickson is married to Liese Greensfelder, a science writer who also helps to manage the business. Their son Tor is now a full partner in the business of Erickson Woodworking.[2]

Video: Woodworking Projects