Rocking Chair Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are following because most of the thoughts and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite simple. Without doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice within this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large dimensions. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to guide them in every possible way he can, through easy to comprehend textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. So, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home Rocking Chair Woodworking Plans

Woodworking is one hobby that could also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Rocking Chair Woodworking Plans.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will have the ability to create some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It’ll be a topic of conversation whenever you have friends come over to see. They will ask: How did you make it? Where did you get the woodworking programs? Just how long did it take to finish the project? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your work, a sense of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Rocking Chair Woodworking Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Rocking Chair Woodworking Plans.

Start with an idea in mind of what you would like to construct and then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for novices available for purchase from online woodworking retailers. A few woodworking program suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a couple. Obviously, you can begin with as expansive a woodworking program as you choose. However, the odds are if you begin with a little woodworking project initially, you will have a better prospect of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Length of: woodworking equipment, the amount and variety of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you want to complete your immediate or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you may not use all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Of course, you will require a dry place to work and might need a pair of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Rocking Chair Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Rocking Chair Woodworking Plans

If you are just beginning and very interested in doing a DIY job for home afterward, woodworking could be interesting. If you do not have the right information, education, and ability, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential aspects you need to remember, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Making something new with your hands is a special feeling. Do not begin a project if you’re not interested, as this may land you at a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and examine the time that you have, until you begin with a project.

4. Start jobs that you’re able to complete. If you’re in the midst of some work, then it’s wise to not start any project in any way.

Starting Your First Woodworking Shop Rocking Chair Woodworking Plans

If you keep those essential things in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a simple construction. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always move into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Rocking Chair Woodworking Plans

Tools are the means whereby you will win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking projects. Based on the type of project that you would like to complete, pricing could be set. The easy the project, the less price it involves. However, at the beginning purchasing the tools will probably be a little hefty. Because of this, it’s much better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you do not have to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the primary things which every beginner should follow. Instructions manual is very easy to understand the procedure, what to do and the way to get it done. Time also plays an important part in the building of woodworking jobs. Woodworking projects demand time and therefore it’s necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that can help you to achieve success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, then the item you need to build, the tools you require to own and the average time you can devote daily; then you’re ready to go.

Conclusion, Rocking Chair Woodworking Plans

These tips and instruction will create the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the vital tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and planning can allow you to earn a great woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Rocking Chair Woodworking Plans

People if you’re trying to find a way to pass time or desire an alternate way to make money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be quite careful when choosing which project to start out with since you will find jobs which may be too tough for a newbie. But don’t be concerned about that since we will give you tips on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, therefore before you choose your job you have to be aware of if you have the available tools to work on that project. Try not to invest a lot of money on buying gear when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Rocking Chair Woodworking Plans

Woodworking in your home will provide you time to research unique jobs and find out a lot of things. That’s why it’s important to invest less money when starting out so that you can manage to make errors and at some time learning about different jobs.
It’s very important that you know more about different kinds of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you will need for specific projects you may want to pursue.
As soon as you understand the basics of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good projects to satisfy your needs.

Rocking Chair Woodworking Plans practice makes perfect so be sure you practice your work daily if possible. Try out a lot of designs utilizing a variety of tools so that you can get the hang of using the tools. When starting out you may make a number of errors but with time you will find out how to properly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Rocking Chair Woodworking Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A small home workshop can produce a broad variety of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us discuss where you will do your woodworking, based on the size of your home, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, of course, the noise level. You can work without bothering the rest of the household. A good compromise could be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Rocking Chair Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Rocking Chair Woodworking Plans if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and equipment. In the start, establish a seat area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hands power tools along with a pegboard above the seat to hang other gear. Put in a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Rocking Chair Woodworking Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. You will find an abundance of quality gently used tools out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents that they will never use. You can usually purchase tools for these sellers for less than half the original price and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a few added dollars on a cheap piece of equipment. The excess cost of time and travel in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uneasy.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite name, this can end up being the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw can be employed to construct an whole house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut curves. It’s perfect for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander with a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it normally requires the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to quickly open and close the limbs without tedious handle turning. The timber beamed surfaces in your vice will occasionally require replacement. I prefer to use soft pine in my vices which will not crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a good quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you may not be using the tape in these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a great deal easier, and of course, quality tape measures can last for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. The expense of glue through all of your projects is a minor cost consideration. Therefore, it makes sense to go with the very best. I also have found over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Rocking Chair Woodworking Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Michael Thonet

Thonet was the son of master tanner Franz Anton Thonet of Boppard. Following a carpenter's apprenticeship, Thonet set himself up as an independent cabinetmaker in 1819. A year later, he married Anna Grahs, with whom he had seven sons and six daughters. Only five of the sons, however, survived early childhood.

In the 1830s, Thonet began trying to make furniture out of glued and bent wooden slats. His first success was the Bopparder Schichtholzstuhl (Boppard layerwood chair) in 1836. Thonet gained substantial independence by acquiring the Michelsmühle, the glue factory that made the glue for this process, in 1837. However, his attempts to patent the technology failed in Germany (1840) as well as in Great Britain, France and Russia (1841). Thonet's essential breakthrough was his success in having light, strong wood bent into curved, graceful shapes by forming the wood in hot steam. This enabled him to design entirely novel, elegant, lightweight, durable and comfortable furniture, which appealed strongly to fashion - a complete departure from the heavy, carved designs of the past - and whose aesthetic and functional appeal remains to this day.

At the Koblenz trade fair of 1841, Thonet met Prince Klemens Wenzel von Metternich, who was enthusiastic about Thonet's furniture and invited him to the Vienna court. In the next year, Thonet was able to present his furniture, and his chairs in particular, to the Imperial Family.

Video: Woodworking Tools